Does the 2019 Bora Legend experience engine knocking?

How to Adjust the Rearview Mirrors on the Buick Excelle?

Buick Excelle rearview mirror adjustment method: The left and right rearview mirror adjustment buttons for the Buick Excelle are located on the left side of the steering wheel. When the knob is in position O, first rotate it to the L or R position to select the left or right mirror, then push the control knob left, right, up, or down to adjust the mirror. The interior rearview mirror can be adjusted using an adjustment lever located beneath its housing. For the left rearview mirror, adjust it so the horizon line is positioned at the center one-half of the mirror, with one-quarter of the car body visible in the mirror. For the right rearview mirror, maintain the car body image at one-quarter of the mirror while adjusting the horizon line to occupy two-thirds of the mirror. This adjustment ensures you can see the following vehicle closely behind you as well as vehicles approaching from other lanes. The interior rearview mirror should be parallel to the horizon, with the horizon positioned at the center one-half of the mirror for optimal visibility.

14

0

Share

What Causes Idle Shaking in Sedans?

Reasons for idle shaking in sedans: 1. Severe engine carbon buildup: A common cause of car shaking is excessive dirt in the throttle body or carbon buildup in the fuel injectors. 2. Ignition system issues: Check the working condition of spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or weak spark plug firing can also lead to such faults. 3. Unstable fuel pressure: If you have already cleaned the engine carbon buildup, throttle body, replaced gaskets and spark plugs, but still notice body shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake manifold pressure sensor. 4. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts act as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts fail, these vibrations can transfer to the steering wheel and cabin, causing shaking during idle in the morning.

12

4

Share

Where is the cabin air filter of Senya S80 located?

The cabin air filter of Senya S80 is installed inside the glove box. You need to remove the glove box to access it. Open the glove box and gently tap it upwards a few times to release it. The installation process is relatively simple. Note that some simplified versions of Senya S80 may not come with a cabin air filter pre-installed. The functions of a car cabin air filter include: Providing fresh air to prevent condensation on car windows, ensuring clear visibility for safe driving; Supplying fresh air to the cabin to prevent occupants from inhaling harmful gases, thereby ensuring driving safety and effectively sterilizing and deodorizing; Ensuring hygiene by keeping cabin air clean and preventing bacterial growth, creating a healthy environment, and effectively filtering out dust, pollen, grinding particles and other airborne particulates.

7

3

Share

How Many Types of Automatic Transmissions Are There?

There are four types of automatic transmissions: AT, CVT, AMT, and DCT. Hydraulic Automatic Transmission (AT) achieves automatic shifting through a combination of hydraulic drive and planetary gears. It consists of a torque converter, planetary gear mechanism, shift actuator, shift control system, and shift operation mechanism. Continuously Variable Transmission (CVT) operates over a continuous range of ratios, better coordinating the vehicle's external driving conditions with engine load. Automated Manual Transmission (AMT) is an improvement over the traditional manual gear transmission, combining the advantages of both AT (automatic) and MT (manual) transmissions into an electromechanical-hydraulic integrated automatic transmission. Dual-Clutch Transmission (DCT) uses two sets of clutches that alternate to achieve seamless shifting. DCT combines the advantages of AT and AMT, offering high transmission efficiency, simple structure, and lower production costs.

4

3

Share

When is the annual vehicle inspection time for cars?

For new cars, inspections are required every two years for the first six years, then annually thereafter. After fifteen years, inspections are required every six months. Here is relevant information about vehicle annual inspections: 1. Time regulations for vehicle annual inspections: National regulations stipulate that inspection offices operate during normal working hours from 9:00 AM to 5:00 PM on weekdays. They are closed on Saturdays, Sundays, and public holidays. 2. Online appointment for vehicle annual inspections: Currently, both new and used vehicles can schedule annual inspections online. Before making an appointment, ensure all traffic violations have been resolved. Additionally, vehicles can only be scheduled for inspection up to three months before the expiration of the current inspection period. The appointment is valid for one week starting from the day after the application. If unable to attend, cancel the appointment in advance. Missing two consecutive appointments will result in being blacklisted from the online appointment system, losing access to the inspection scheduling service.

7

1

Share

What is the tire model equipped on the Audi A3?

Audi A3 is equipped with the following tire models: 225/45R17, 205/55R16, 225/40R18. The specific tire model depends on the vehicle version. Owners can obtain tire information by checking the tire model. For example, in the 225/45R17 model, 225 represents the tire width of 225mm, 45 indicates the aspect ratio is 45%, R stands for radial structure, and 17 denotes the rim size of 17 inches. During vehicle use, it is essential to develop the habit of regularly using a pressure gauge to measure tire pressure instead of relying on visual judgment. Sometimes, significant pressure loss may not be visibly apparent. Check the pressure at least once a month. The spare tire should be inflated to a relatively higher pressure to prevent gradual pressure loss over time. Before driving on highways, always ensure correct tire pressure. Typically, tire pressure should be increased by 10% when driving on highways to reduce heat generated from flexing, thereby enhancing driving safety. The two tires on the same axle should have identical tread patterns and be inflated to the same pressure; otherwise, it may affect vehicle handling and performance.

2

0

Share

Does the 2019 Bora Legend experience engine knocking?

How to Adjust the Rearview Mirrors on the Buick Excelle?

What Causes Idle Shaking in Sedans?

Where is the cabin air filter of Senya S80 located?

How Many Types of Automatic Transmissions Are There?

When is the annual vehicle inspection time for cars?

What is the tire model equipped on the Audi A3?

What are the differences between Lavida and Octavia Pro?

Why was the Changan CS85 discontinued?

How far can you drive when the fuel tank warning light turns yellow?

What are the infotainment features of the Changan UNI-K?