Does Start-Stop Harm the Engine?

1 Answers
LaSavannah
07/29/25 9:55pm
Start-stop does not harm the engine. It is a relatively new automotive technology that allows the engine to pause when the vehicle is stationary. Functions of the start-stop system: 1. It pauses the engine during prolonged stops like waiting at traffic lights or in traffic jams, which helps reduce fuel consumption; 2. By pausing the engine, the start-stop system minimizes friction among internal components, thereby reducing wear. However, when driving on slopes, if the start-stop function activates, releasing the brake may cause the vehicle to roll backward due to insufficient power, potentially leading to accidents. Therefore, it is recommended to disable the start-stop function when driving uphill.
Was this review help?
11
1
Share
More Forum Discussions

What is the method to reset the maintenance reminder for the Highlander?

Here is the method to reset the maintenance light for the Toyota Highlander: 1. With the Highlander's engine turned off, press and hold the trip meter reset button located below the tachometer. 2. Turn the ignition switch to the ON position, then release the trip meter reset button. The SERVICE indicator will appear on the display. 3. Pull out the minute button on the clock and turn it to the right. The odometer reading will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition switch to the ON position again, and the SERVICE indicator will disappear. Additional information: The Highlander is a Toyota-produced vehicle, a large-sized SUV in the Toyota family, featuring a spacious body and an innovative, roomy interior.
6
2
Share

How much fuel is needed for 400 kilometers?

Approximately 18L of fuel is needed for 400 kilometers. Factors affecting fuel consumption: Air conditioning has a significant impact on a car's fuel consumption. Vehicle weight also notably affects fuel consumption, and tires along with tire pressure similarly influence fuel efficiency. Fuel-saving methods: Regularly check the tire system; insufficient tire pressure increases friction between the tires and the ground, leading to higher fuel consumption. Therefore, it's important to frequently check tire pressure, as different car models and tires have varying standard pressure levels. Also, regularly inspect the braking system, as some cars may experience slight brake drag, which increases the vehicle's load during driving and raises fuel consumption. Hence, periodic checks are necessary. Reduce load by minimizing unused items in the trunk to lower fuel consumption.
6
3
Share

Is the Porsche 718 a horizontally opposed engine?

The Porsche 718's engine is horizontally opposed, and it is a mid-engine sports car. The Porsche 718 is equipped with two engines: one is a 2.0-liter turbocharged engine, and the other is a 2.5-liter turbocharged engine. Here is an introduction to the Porsche 718: 1. The front suspension of the Porsche 718 uses MacPherson independent suspension, and the rear suspension also uses MacPherson independent suspension. The handling and power of the Porsche 718 are excellent, making this car popular among many consumers. 2. There are only two manufacturers in the world that use horizontally opposed engines: one is Porsche, and the other is Subaru. The horizontally opposed engine has a lower center of gravity, and using such an engine can lower the vehicle's center of gravity, thereby improving handling.
11
2
Share

What is the Difference Between the Miller Cycle and the Atkinson Cycle?

Here are the differences between the Atkinson cycle and the Miller cycle: 1. Different connecting rod mechanisms: The Atkinson cycle has a complex connecting rod mechanism, while the Miller cycle does not. The Miller cycle changes the compression ratio by adjusting the timing of the intake valve closure. 2. Different piston compression methods: The Atkinson cycle compresses through the connecting rod mechanism. In the Miller cycle, the intake valve closure is delayed during piston compression, allowing some of the air-fuel mixture drawn into the cylinder during the intake process to flow back into the intake manifold, thereby altering the compression ratio. 3. Overall perspective: Both cycles aim to achieve an expansion ratio greater than the compression ratio, but they employ different methods. The Atkinson cycle changes the piston stroke through various mechanisms, while the Miller cycle achieves this by delaying the closure of the intake valve.
14
1
Share

What is the difference between front and rear tires on a motorcycle?

There is no difference between the front and rear tires of a motorcycle. Below is relevant information about motorcycle tire specifications: 1. Tire inflation pressure value: The inflation pressure of motorcycle tires generally ranges between 147 kPa and 343 kPa. Sometimes, some tire specifications also include a ply rating at the end, such as 2.75-17-4pr, which indicates that the tire's section width is 2.75 inches, the inner diameter is 17 inches, and 4pr means the tire has a 4-ply rating. 2. Functions of the tire: (1) Direct contact with the road surface, bearing the weight of the vehicle body. (2) Utilizing the elasticity after inflation to cushion and partially absorb vibrations and impacts caused by uneven road surfaces during driving.
4
2
Share

Is the Mobis 6AT Transmission Stable?

Mobis 6AT transmission is stable. The Mobis 6AT transmission adopts the latest manufacturing technology, featuring a highly responsive shifting system, stable operation, low power consumption, and excellent cost performance. Below are specific details about AT transmissions: 1. Structural Form: An AT transmission is an automatic transmission. Some AT transmissions come with a manual mode, while others do not. A manual-automatic transmission refers to a certain type of automatic transmission that includes manual shifting capability, indicating a structural form of the transmission. 2. Working Principle: The AT transmission is a relatively common type of automatic transmission, containing multiple planetary gears inside that rely on planetary gear sets for speed and torque variation. The AT transmission connects to the engine via a torque converter. This type of transmission offers smooth shifting and high reliability and durability.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.