···
Log in / Register

Does Slight Water Intake Affect the Engine?

4 Answers
HaileyLynn
07/29/25 10:24pm

When a small amount of water enters the engine and mixes with the engine oil, the oil quality deteriorates. Engine oil containing water increases wear on engine components, leading to louder noise and greater vibration during future vehicle operation. More information about automotive engines is as follows: 1. Overview: The automotive engine is the device that provides power to the vehicle, determining its power, fuel economy, stability, and environmental friendliness. Depending on the power source, automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrids, among others. 2. Others: Common gasoline and diesel engines belong to reciprocating piston internal combustion engines, which convert the chemical energy of fuel into the mechanical energy of piston movement and output power externally. Gasoline engines have high rotational speeds, are lightweight, produce less noise, are easier to start, and have lower manufacturing costs. Diesel engines have higher compression ratios and thermal efficiency, offering better fuel economy and emission performance than gasoline engines.

Was this review help?
9
5
Share
MacJocelyn
08/15/25 11:04pm

As a car owner, I've experienced a situation where the engine was slightly flooded, and I almost didn't notice it. It happened last summer when I drove through a puddle, and water splashed under the hood. To be honest, even slight water ingress can easily cause problems, such as rust and corrosion of parts. The engine has a lubrication system, and if water mixes in, it can dilute the engine oil, leading to wear on bearings and piston rings. Worse yet, if water enters the cylinders, it may cause cylinder scoring or seizure. Although slight flooding might not immediately stall the engine, over time, the risk of electrical short circuits and spark plug failure increases. I must remind everyone: if water enters the engine, do not attempt to restart the car—immediately take it to a repair shop for drainage and inspection. For prevention, avoid driving through deep water, regularly check the engine's sealing, and ensure safe driving. Never underestimate even a small amount of water.

Was this review help?
18
1
Share
Expand All
MacAshley
10/18/25 2:41am

I recently experienced a bit of rainwater getting into the engine, which happened due to carelessness during car washing. Since then, I've learned that even minor water intrusion can have real impacts, especially on the fuel system and electronic control unit. Water can oxidize metal components, leading to unstable idling or weak acceleration; if it enters the intake manifold, it can also affect the air-fuel ratio, causing a sudden spike in fuel consumption. I must say, don't underestimate small issues—they can lead to sudden failures while driving. It's advisable to first check if the air filter is wet, then pull over and call for assistance. In the long run, installing an engine guard can reduce similar risks. This is not something to take lightly—safety always comes first.

Was this review help?
18
1
Share
Expand All
Raymond
12/01/25 3:21am

Having driven for over a decade, I've encountered minor water ingress a few times. While the impact may seem small, it shouldn't be overlooked: it can corrode intake pipes, cause sensor malfunctions, and even lead to lubrication issues, increasing engine strain. If the water quantity is minimal, prompt action like drying it out and checking the oil level can prevent it from escalating into oil leaks or starting failures. I emphasize draining any water residue as soon as possible—otherwise, rusted components become much harder to repair.

Was this review help?
8
4
Share
Expand All
More Forum Discussions

What lights should you turn on when driving in a heavy rainstorm?

When driving in heavy rain, turn on the headlights or front fog lights. Precautions for driving in rainy weather are as follows: 1. Turn on the wipers promptly; 2. If there is frost on the windshield, turn on the air conditioning and direct the cold air toward the windshield; 3. The driver should hold the steering wheel with both hands to maintain straight and low-speed driving, and brake gently to prevent the tires from locking up and causing the vehicle to skid; 4. Reduce the vehicle's speed, pay attention to the distance between the front and rear vehicles, and be mentally prepared to take emergency measures in advance. Car headlights, also known as car front lights or LED daytime running lights, should be maintained by: 1. Regularly checking the sealing of the headlights—if the sealing ring between the lens and reflector is damaged, replace it promptly; 2. Regularly cleaning the reflector—if it turns black and the brightness decreases, replace it; 3. Regularly removing dust and stains from the bulbs.
3
3
Share

What Causes Rough Gear Shifting in Automatic Transmissions?

Rough gear shifting in automatic transmissions may be caused by: transmission clutch pressure leakage; obstructed or sluggish transmission oil passages; insufficient or excessive transmission fluid levels; or damaged solenoid valves. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, transmissions with more gears tend to be more fuel-efficient. Below is relevant information: 1. Damaged solenoid valves: If sludge circulates within the transmission fluid and blocks the oil passages in the valve body, it can cause rough shifting. Over time, this can lead to a series of transmission issues such as overheating, impact, and slipping. 2. Incorrect transmission fluid levels: Verify whether the transmission fluid is at the standard level. Both insufficient and excessive transmission fluid can cause this issue. For vehicles equipped with a transmission dipstick, check whether the fluid level is within the standard range when the engine is running.
5
1
Share

Symptoms of a Faulty Thermostat in Jetta?

Jetta thermostat failure symptoms are as follows: 1. Thermostat malfunction with insufficient opening affects the engine's large and small circulation cycles, preventing effective heat dissipation and causing engine coolant temperature to rise; 2. Excessive thermostat opening leads to low engine coolant temperature, slow temperature rise, increased fuel consumption, and abnormal engine noises; 3. Thermostat sticking tends to cause carbon buildup, resulting in unstable engine idle speed and engine vibration. Below is how the thermostat works: 1. The thermostat is a valve controlling coolant flow path. It's an automatic temperature-regulating device typically containing temperature-sensing components that open/close air, gas or liquid flow through thermal expansion/contraction. 2. At normal temperature, the wax remains solid. When water temperature is below 76°C, the main valve closes completely while the bypass valve opens fully, allowing water from the cylinder head to directly enter the water pump via the bypass pipe (called small circulation). As water only flows between pump and water jacket without passing through the radiator and with small flow rate, the cooling intensity is weak.
14
3
Share

What Causes the Noise When Shifting Gears in an Automatic Transmission?

The reasons for noise when shifting gears in an automatic transmission are as follows: 1. Large valve clearance when the engine is cold: Poor lubrication can cause noise during gear shifting between cold and warm engine states, lasting about 3 minutes, but this is a normal phenomenon. 2. Issues caused by parking on a slope: If you engage the P (Park) gear before applying the handbrake when parking on a slope, the vehicle's weight will be entirely on the P gear due to inertia, leading to noise when shifting gears. However, if you apply the handbrake first, the handbrake will bear the weight, and no noise will occur. 3. Transmission problems: Wear and tear in the transmission, such as a loose driveshaft, worn differential, worn output shaft inside the transmission, worn transmission gears, or faulty shifting mechanism, require immediate attention. It is essential to visit a 4S shop or a professional auto repair shop for technician repairs.
19
5
Share

What are the vehicle warning lights?

There are ten main warning lights: 1. Oil pressure warning light: When illuminated, it indicates the engine oil level or pressure is below standard. Continued driving may cause severe engine wear due to lack of lubrication. 2. Coolant temperature warning light: Displays the temperature of the engine coolant. 3. Engine malfunction light: Shows the engine's operational status, typically in yellow. It lights up during ignition self-check and should turn off after starting. Persistent illumination indicates potential engine system issues. 4. Brake system warning light: If illuminated, first ensure the parking brake is fully released. If it remains lit, check brake fluid level or pad thickness. 5. Power steering warning light: Indicates malfunction in the power steering system. 6. Door/hood open warning light: Warns if doors or hood aren't properly closed. 7. Tire pressure monitoring light: Signals low tire pressure or possible tire damage. 8. Battery warning light: Usually yellow, it should turn off after self-check. 9. ABS warning light: Primarily yellow, failure to light during self-check or persistent illumination indicates potential ABS system faults. 10. Electronic stability control light: Normally indicates system deactivation when lit, and activation when off.
3
1
Share

Should the Foot Always Be on the Brake in an Automatic Transmission?

In an automatic transmission, the foot should not always be on the brake. It is best for the driver to keep the foot in the middle behind the brake and accelerator pedals. Below are specific details about the driver's foot placement: 1. Right Foot: The right foot should always be placed in the middle behind the brake and accelerator pedals. This makes it easier to step on the brake in case of an emergency and also facilitates acceleration. Tilting to the right is the accelerator pedal, while stepping straight down is the brake pedal. 2. Precautions: Do not use the left foot for braking and the right foot for acceleration, as this may lead to simultaneous pressing, wasting fuel and making operation difficult. 3. Correct Movement: The standard way to press the accelerator and brake is to pivot the heel of the right foot and rotate left or right to press, keeping the heel on the ground.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.