···
Log in / Register

Does Replacing the Front Windshield Affect Sealing?

3 Answers
OArabella
08/26/25 4:01am
If replaced at a 4S shop, there is basically no impact. Here is relevant information: 1. Precautions for front windshield replacement: After the windshield is replaced, the vehicle should not be driven at high speeds and needs to be parked for 3 to 5 days. This allows the adhesive securing the front windshield to fully dry. Avoid exposure to rain. If the windshield replacement is not properly handled, it may lead to water leakage during later use. 2. Impact of front windshield replacement: Replacing the front windshield when the vehicle has not been involved in a traffic accident will not cause any issues. However, replacing the windshield after an accident may have some impact. When driving on the road, the windshield is highly susceptible to being cracked by stones, necessitating replacement; otherwise, it may affect usage.
Was this review help?
14
5
Share
KathrynLee
09/08/25 5:02am
Replacing the windshield seal definitely makes a difference. As a veteran driver with 20 years of experience, I have deep personal experience. When the seal is good, the glass is firmly fixed and less likely to detach in an accident, ensuring safety. With poor sealing, rainwater can seep into the cabin, soaking the floor and eventually rusting the frame—I almost lost control driving in heavy rain that year. Also, pay attention to the quality of the sealant. Low-quality glue ages quickly and fails within a year or two. I recommend choosing imported materials and having professionals apply the glue under pressure to ensure even thickness—never cut corners with roadside stalls to save a few bucks. In fact, regular inspection of the seal is also important. Detecting cracks early can avoid major repairs. Overall, spending a few hundred more is worth it for priceless safety.
Was this review help?
8
0
Share
Expand All
Freddie
10/22/25 5:05am
Replacing glass seals has a significant impact. As a commuter who travels on highways daily, poor sealing leads to loud wind noise, disrupting music listening and causing fatigue while driving. The more troublesome issue is water leakage. Last time, I opted for a cheaper glass replacement, but the sealing wasn't done properly. During heavy rain, water seeped into the console, causing a short circuit in the navigation system, which cost over a thousand yuan to repair. After resealing, it's noticeably quieter with no leaks, and the interior environment is much fresher. It's recommended to choose a qualified repair shop that uses eco-friendly adhesive to avoid unpleasant odors affecting air quality. During regular car washes, take a moment to check the condition of the seals and address any issues early.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Why does the Skoda Superb's fan continue to run after the engine is turned off?

It is normal for the Skoda Superb's fan to run for 3 minutes after the engine is turned off. If it doesn't stop, it is usually due to a faulty temperature control switch or a damaged fan relay. Skoda Superb Interior: The interior features a win-door dual-opening trunk lid, a solar sunroof system, and a PLA automatic parking system. Common configurations found in Japanese cars, such as rear window sunshade roller blinds, fully automatic dual-zone air conditioning, and pneumatic frameless wipers, are also included. Skoda Superb Powertrain: It is equipped with domestically produced Volkswagen EA888 series 1.8TSI and 2.0TSI turbocharged engines of different displacements, paired with a 6-speed Tiptronic automatic transmission.
12
2
Share

Can the battery be disconnected when replacing the battery on the Boyue?

Boyue can disconnect the battery when replacing it. Battery replacement process: Remove the fixed battery and take the battery out of the vehicle. If the vehicle is connected to an external power source, be careful not to let the positive cable come into contact with the body, and you can use cotton cloth for isolation. Place the new battery in the installation position and secure it. For batteries with ventilation pipes, do not forget to remove the ventilation pipe connector from the old battery and then install it on the new battery. Battery function: Provide power for the entire vehicle and user-added electronic components such as headlights and charging interfaces. When starting the engine or idling, it provides all the power for the entire vehicle. During driving, it complements the generator to charge or discharge in time to ensure the normal operation of the vehicle.
8
1
Share

What are the dimensions of the Audi RS6?

Audi RS6's body dimensions are length 4987mm, width 1936mm, height 1456mm, with a wheelbase of 2920mm. Audi RS6 configuration: Equipped with a 4.0-TFSI twin-turbocharged V8 engine, capable of delivering up to 412kW (560PS) power and 700Nm peak torque, which can be described as brutal; paired with the currently popular 8AT automatic transmission, plus Audi's high-performance Quattro all-wheel-drive system, achieving a 0-100km/h acceleration time of 3.9 seconds and a top speed of 309km/h is naturally expected. Audi RS6 trunk capacity: The trunk capacity of the Audi RS6 is 565 liters, which can be expanded to 1680 liters when the rear seats are folded down. The trunk dimensions are height 720mm, width 1155mm, and depth 1181mm/1966mm.
10
2
Share

How Long Does It Take to Perform a Wheel Alignment?

Wheel alignment generally takes about half an hour. Below is a related introduction to wheel alignment: 1. Function: Front wheel alignment includes four aspects: caster angle, kingpin inclination angle, camber angle, and toe-in. Rear wheel alignment includes camber angle and individual rear wheel toe-in. Collectively, front and rear wheel alignment is referred to as wheel alignment, commonly known as four-wheel alignment. The purpose of wheel alignment is to ensure the vehicle maintains stable straight-line driving and easy steering, while reducing wear on tires and steering components during operation. 2. Definition: The installation of a vehicle's four wheels, steering mechanism, and front and rear axles should maintain specific relative positions, which are standard values set by the manufacturer. Adjusting and restoring these positions is what constitutes four-wheel alignment.
19
5
Share

What is the full name of BMW M?

The full name of BMW M is BMW M GmbH (German: BMW M GmbH), originally known as BMW Motorsport GmbH, a subsidiary of the German automotive manufacturer BMW Group. Introduction to the BMW M Series: The M series models are the original high-performance versions launched by BMW for some of its models. Among them, the M3 and M5 are the evergreen and most well-known models in the M series. The letter "M" is taken from the first letter of "Motorsport" in "BMW Motorsport," and its status is equivalent to that of AMG for Mercedes-Benz and the RS series for Audi. Introduction to the BMW M1: The M1 extensively adopts racing technology, pushing the spirit of motorsport to the extreme. Its 3.5-liter inline 6-cylinder engine can output 277 horsepower. The success of the M1 laid the foundation for BMW's future style of using inline 6-cylinder engines as the main power configuration. Even today, the brand's 6-cylinder engines still adhere to the increasingly rare inline configuration, becoming one of the brand's distinctive features.
14
2
Share

What to do if the 2021 XRV tire pressure warning light stays on?

2021 XRV tire pressure warning light stays on due to abnormal tire conditions. Reasons for abnormal tire conditions: Abnormal tire pressure: Generally, the warning light will activate if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring system not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to record the previous data, causing the tire pressure warning light to stay on. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by impact), it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new component. The tire pressure monitoring indicator is a yellow symbol—an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside. The illumination of this indicator signifies abnormal tire pressure.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.