Does Deep Water Wading Affect New Energy Vehicles?

What is the general pressure for car air conditioning?

Car air conditioning should normally have a high-pressure reading between 1.3 to 1.7MPa, and a low-pressure reading between 0.15 to 0.25MPa. The car air conditioning system is a device designed to cool, heat, ventilate, and purify the air inside the vehicle compartment. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety. The presence of an air conditioning system has become one of the indicators of a car's comprehensive functionality. During summer, when there is a significant temperature difference between the inside and outside of the car, it is advisable not to immediately set the air conditioning to a very low temperature upon entering the vehicle. Instead, first use high airflow with natural ventilation to dissipate the hot air inside the compartment. Then, avoid closing all windows immediately; turn on the air conditioning and allow your body to gradually adjust before setting the air conditioning to the desired temperature and closing the windows. This approach prevents discomfort caused by a sudden drop in external temperature.

1

2

Share

What is the tire pressure for a 4.2-meter truck?

The recommended tire pressure for this type of truck is around 800 kPa. Tires are the only part of the vehicle that comes into contact with the ground, and they are crucial for driving stability and safety. Therefore, it is essential to pay attention to your vehicle's tires during daily use. Below is some relevant information about tires: 1. Pressure: Tire pressure is extremely important. It should neither be too high nor too low. If the pressure is too low, the tires may exhibit wave-like deformation during high-speed driving, which can shorten their lifespan and increase the risk of a blowout. If the pressure is too high, it reduces the contact area between the tire and the ground, leading to poorer traction. Poor traction can negatively affect the vehicle's handling and driving stability. 2. Regular Replacement: Tires are made of rubber, which can deteriorate over time. Therefore, tires need to be replaced periodically. Under normal conditions, tires installed on a vehicle can last for about four years, so it is recommended to replace them every four years. After installing new tires, it is crucial to perform a dynamic balance test on each wheel to prevent abnormal vibrations.

3

5

Share

What is the wading depth of the Audi A4?

The maximum wading depth of the Audi A4 is 320mm. The wading depth of the Audi A4 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Audi A4 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. Alternatively, installing a snorkel can increase the height of the engine's air intake, thereby improving the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in the water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.

20

3

Share

Which Turn Signal to Use When Making a Right U-turn?

When making a right U-turn, you should not use the left turn signal but the right turn signal. The turn signal should indicate the direction of the U-turn. It's important to note that the signal should be activated in advance. Slowing down and signaling only when reaching the intersection can cause sudden interference for vehicles behind. If the following driver is not paying full attention, it may lead to a traffic accident. Precautions for U-turns: When making a U-turn, you should activate the left turn signal in advance, and the maximum speed should not exceed 30 kilometers per hour. Do not obstruct other vehicles or pedestrians traveling normally. Circumstances where U-turns are prohibited: U-turns are prohibited where there are "No U-turn" or "No Left Turn" signs: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. Since a U-turn is an extension of a left turn, intersections with "No Left Turn" signs also prohibit U-turns. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If the intersection permits U-turns, you must cross the crosswalk before turning around, and you cannot make the U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited in the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any signs, U-turns are only permitted in the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, you must wait for the green light and cross the stop line before making the turn. U-turns are prohibited on highways: Making a U-turn by crossing the central divider on a highway is illegal and will result in a fine and 12 penalty points. If you miss an exit on the highway, continue to the next exit and leave the highway. Never attempt an illegal U-turn.

5

Share

Why Does a Manual Transmission Car Shudder When Starting?

Manual transmission starting shudder is generally caused by the wear and slippage of the clutch pressure plate and disc, mostly due to aging or quality issues. This requires replacing both the pressure plate and the disc simultaneously. If the driver is a beginner, the idle speed of driving school cars is usually higher, allowing smooth movement without pressing the accelerator. However, almost all manual transmission cars on the market require gently pressing the accelerator when starting. The details are as follows: 1. Fault Handling: Car starting shudder is a very common phenomenon, and there are many reasons that can cause it, either due to faults in the car itself or the driver's poor driving habits. Only after identifying the cause of the starting shudder can timely fault handling be performed. 2. Causes of Shudder: When a car starting shudder occurs, it is essential to carefully investigate the cause, as different shudder phenomena have different reasons. In case of starting shudder, it is recommended to let the engine idle, engage a low gear, slowly release the clutch pedal, and increase the throttle to start. If the body shakes significantly, it indicates clutch shudder. It could also be caused by broken or loose rivets on the driven plate, fractures in the driven plate steel sheet, or unbalanced rotating components. Additionally, loose engine mounts or misalignment between the transmission's first shaft and the engine crankshaft can also lead to car starting shudder.

15

0

Share

What Causes the Noise When Releasing the Brake?

The reasons for abnormal noise when releasing the brake are as follows: 1. Slow brake release: This noise mainly occurs when the brake is released too slowly during startup, which is a common issue for many automatic transmission car owners. When the brake pedal is released gradually, the engine already has sufficient power to drive the car forward, but the brake hasn't been fully released yet. As a result, the moving wheels are held back by the brake system, naturally causing abnormal noise. So next time, remember to release the brake a bit faster. 2. Rust bonding between the brake disc and brake pads causing noise: This usually happens after driving in the rain and then leaving the car unused for several days. The brake disc and brake pads rust and stick together, producing noise when the car is started again. This can be resolved by applying butter or specialized lubricant to the connection between the brake pads and the brake caliper at a repair shop. 3. Metallic noise: Many brake pads nowadays are made of semi-metallic materials, containing a large number of metal fibers. Sometimes, metal particles form, creating a harsh noise when pressing or releasing the brake. This noise usually disappears after driving for a while. If it persists, it may indicate poor manufacturing quality, and it is recommended to replace the brake pads promptly to avoid damaging the brake disc.

15

4

Share

Does Deep Water Wading Affect New Energy Vehicles?

What is the general pressure for car air conditioning?

What is the tire pressure for a 4.2-meter truck?

What is the wading depth of the Audi A4?

Which Turn Signal to Use When Making a Right U-turn?

Why Does a Manual Transmission Car Shudder When Starting?

What Causes the Noise When Releasing the Brake?

Is It Normal to See Black Smoke When Accelerating Hard?

What are the license plate registration requirements for new energy vehicles in Shenzhen?

Should you use the left turn signal when making a right U-turn?

What is the usage method of automotive brake fluid?