···
Log in / Register

Does Audi have new energy vehicles?

1Answers
VonAmara
07/29/2025, 03:27:57 AM

Audi has launched a pure electric vehicle, the Audi e-tron. The 2021 Audi e-tron comes in three models: the standard, mid-range, and high-end configurations. Among new energy vehicles, pure electric vehicles can achieve zero emissions. The 2021 Audi e-tron, this SUV adopts a dual-motor drive system, with one motor on the front axle and another on the rear axle as power sources, making the Audi e-tron a four-wheel-drive SUV. This mid-to-large SUV boasts 313 horsepower and can deliver 230 kilowatts of power. In terms of energy consumption, the Audi e-tron is equipped with a 96.7kWh ternary lithium-ion battery. The fast-charging mode takes 0.67 hours, while the slow-charging mode requires 9.5 hours. The standard model of the Audi e-tron has a pure electric range of 500 kilometers, placing its range in the upper-middle level. Generally, the Audi e-tron can be charged once every two weeks. Regarding body dimensions, this mid-to-large SUV measures 4901mm in length, 1935mm in width, and 1640mm in height, with a curb weight of 2625 kilograms. It is fitted with 19.0-inch aluminum alloy wheels.

Was this review help?
109
Share
More Q&A

Where are the drainage holes located on the Geely Boyue Pro?

The Geely Boyue has drainage holes in the sunroof, all four doors, both sides of the rear bumper, and under the wipers. Below are the specific details about the Geely Boyue: 1. Body dimensions: The Geely Boyue measures 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm. It has a fuel tank capacity of 58 liters and a curb weight of 1575kg. 2. Powertrain configuration: The vehicle features a MacPherson strut front suspension and a multi-link independent rear suspension. The Geely Boyue is equipped with a 1.8T 184hp L4 turbocharged engine paired with a 7-speed dual-clutch transmission. It delivers a maximum power of 135kW at 5500rpm and a maximum torque of 300Nm between 1750-4000rpm, with a top speed of 200km/h.
117
Share

How long is the warranty period for Geely Emgrand?

Geely Emgrand's three-guarantee period is valid for 2 years or 50,000 kilometers. Both the three-guarantee validity period and warranty period take effect from the date of issuing the new car purchase invoice. The following is relevant information about Geely Emgrand: 1. Positioning: Emgrand adopts 'Excellence, Steadiness, and Prestige' as its brand proposition, representing Geely Automobile's development direction of safety, energy efficiency, and environmental protection. 2. Logo: Its logo design is noble and exudes strong international characteristics, effectively inheriting excellent inherent cultural genes while shedding the historical baggage of Geely's original image. 3. Main models: Following the Emgrand EC718 and EC718-RV, subsequent models include GT, EC8, EX7, EX8, ET-9, EX9 and other sports cars, SUVs, MPVs, and pickup trucks, offering a rich and extensive product coverage.
119
Share

How to open the hood of the Nissan Sylphy?

The method to open the hood of the Nissan Sylphy: Inside the cabin, pull the device on the left side of the driver's seat to unlock the engine compartment hood. Then, go to the engine compartment hood and pull the unlocking lever to open it. Here is some relevant information about the Nissan Sylphy: 1. The 1.6L model of the Nissan Sylphy has a maximum engine power of 123 horsepower and a peak torque of 154 N·m. 2. The 1.8L model of the Nissan Sylphy continues to use the current engine, with unchanged power parameters: maximum power of 139 horsepower (102 kW)/6000 rpm and peak torque of 174 N·m/3600 rpm. 3. The CVT transmission has been recalibrated, expanding the gear ratio range compared to the current model, increasing it from the original 7.3:1 to 8.7:1, achieving the design goal of a compact CVT with a large gear ratio.
116
Share

Will the engine be damaged if the car stalls when driving through water?

When a car stalls after driving through water, it is usually due to moisture or short circuits in the system. Generally, the engine is not severely affected. You can start the car again after letting the circuits dry naturally or using a hair dryer to dry them. In more serious cases, replacing the fuse may be necessary. Reasons for a car stalling after driving through water: 1. Moisture or water-induced short circuits: Moisture or water entering the high-voltage ignition system can cause a short circuit, leading to stalling. This is a common scenario where the water appears shallow, and the car seems capable of passing through, but stalling occurs due to water splashing. 2. Water entering the exhaust pipe: The car's exhaust pipe is positioned relatively low. Typically, if the water level rises above the exhaust pipe, the car will stall due to the inability to expel exhaust gases. 3. Water entering the air intake: This occurs when water enters through the air filter, causing the engine to stall. This situation is less common and usually happens only when the water level is quite high.
113
Share

What's the reason for BMW X6 door lock sensor failure?

There are only three possible reasons for the failure of the smart key. First, the car key may be out of battery, which naturally prevents the door from opening and the car from starting. Another possibility is that the car's battery is dead. If the battery is dead, the sensors in the car won't have power, so they can't detect the key. As a result, the car won't start. If neither of these is the issue, then the problem lies with the smart key or the sensor module, and you'll need to visit a 4S store for repairs. Do not leave the spare key in the car: If the primary key fails and the spare key is misplaced, you'll face high reconfiguration costs. If you only need to replace the key, you'll have to provide a series of documents and the manufacturer must supply the corresponding model parameters and password. This process is not only troublesome but also time-consuming. Do not use the wrong battery: Just like phone batteries, smart key batteries cannot be used randomly. Using the wrong battery can damage the circuit board. Most smart keys use button batteries, so simply find the same model.
101
Share

What is the reason for the squeaking sound when reversing in a Sagitar?

The reasons for the squeaking sound when reversing in a Sagitar are: 1. The newly replaced brake pads have not fully worn in. New brake pads require about 100 to 200 kilometers to fully break in, and it is normal for them to produce noise during this period. 2. Severe wear of the brake pads. If the brake pads are severely worn, the vehicle will produce noticeable noise when braking, accompanied by insufficient braking force. 3. Uneven material quality of the brake pads. Some low-quality brake pads may have harder spots, which can generate noise when rubbing against the brake disc. Solutions are as follows: 1. If the brake pads have just been replaced, you can ignore the noise initially. After driving 100 to 200 kilometers, the noise will disappear once the brake pads are fully broken in. 2. If the noise is caused by severely worn brake pads, replacing them with new ones can solve the problem. 3. When selecting brake pads, it is advisable to choose products from well-known brands. If possible, using original equipment manufacturer (OEM) parts is recommended, as they offer the best compatibility with the vehicle's brake calipers and provide optimal braking performance.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.