Does a new car need inspection in the second year?

2 Answers
VonTheo
07/29/25 8:03am
According to regulations, a new car needs to undergo an annual inspection at the vehicle management office in the second year. The normal inspection process involves going to a testing station for vehicle checks (lights, tires, exhaust emissions, etc.), and then obtaining the inspection sticker after the vehicle passes the inspection. However, don't forget the "6-year exemption" policy, which simply means that the vehicle inspection part is exempted, and you can directly apply for the inspection sticker. Below is more relevant information: Exemption conditions: The vehicle must be a non-commercial vehicle; the vehicle's rated passenger capacity must be 6 or fewer. Starting from November 20, 2020, non-commercial small and mini buses with 7-9 seats (excluding minivans) are included in the exemption scope; vehicle types specified on the registration certificate: sedans (mini, small, medium, large), mini ordinary passenger vehicles, mini off-road passenger vehicles, small ordinary passenger vehicles, small off-road passenger vehicles, small special passenger vehicles; vehicles registered within 4 years from the date of manufacture; meeting the above conditions and having no fatal traffic accidents during the exemption period.
Was this review help?
7
4
Share
McMadelyn
08/12/25 11:16am
I remember when I first bought my new car, I did have to deal with the annual inspection in the second year, but it wasn't the kind of queuing for an inspection that people might imagine. Instead, it was about applying for an inspection compliance sticker. New cars enjoy a six-year exemption from on-site inspection, meaning you don't have to take the car to the inspection station for a hassle. However, in the second year, you need to obtain this sticker to prove that the vehicle is still within the regulatory standards. Last year, I handled it online through the Traffic Management 12123 APP, and the steps were quite simple—just upload the vehicle license and insurance information. Don't delay too long; exceeding the deadline might result in fines or affect insurance claims, especially if you frequently drive long distances. Developing a good habit of checking the annual inspection status every year can save a lot of trouble.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

How to Use the M Gear in an Automatic Car?

M gear stands for Manual gear. The M gear refers to a setting found on the fully manual function dial of a camera. Here's how to use it: 1. On a semi-automatic transmission, there are clear markings. The correct method is to shift the D gear to the left once to enter manual mode. At this point, the central console display will show; 2. The letter M will appear below the fuel information, followed by a number indicating the current gear. Pushing the gear lever up shifts to a higher gear, while pulling it down shifts to a lower gear; 3. The M gear is primarily used for driving in more challenging conditions, such as steep slopes, and is commonly referred to as the climbing gear.
8
1
Share

What to Do If the Changan Ford Windshield Washer Fluid Reservoir is Leaking?

For a leaking windshield washer fluid reservoir, you can temporarily place loose tobacco inside and utilize the circulation pressure of the washer fluid to clog the leak in the cooling tube for temporary use. If there is a crack in the panel, it indicates a quality issue with the panel, and you should contact the manufacturer for a replacement. If the windshield washer fluid reservoir leaks while driving, take the following measures based on the specific situation: 1. Turn on the cooling water circulation for 5-10 minutes. Whether it's the reservoir, rubber hose, or the entire system, the leak will stop, and there will be no need to drain it, as it won't affect cooling or cause blockage. 2. If the leak is a crack no larger than 1 mm or a hole no larger than 2 mm, add a bottle of strong leak stopper to the reservoir and start the vehicle. 3. If the cooling tube of the reservoir is leaking severely, you can cut off the leaking section of the tube, plug the cut end with a soap-soaked cotton ball, and then use pliers to clamp the cut end of the tube, crimping it to compress and stop the leak.
12
3
Share

What engine and transmission does the Skoda Kamiq use?

The Skoda Kamiq's transmission is manufactured by Aisin. Established in 1969, Aisin is a world-renowned specialist in the research, development, and production of automotive automatic transmissions, holding the highest global market share in this sector. The Skoda Kamiq is equipped with a 6-speed automatic manual transmission. This type of transmission features eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission augmented with manual shifting capabilities, designed to enhance the driving pleasure of automatic vehicles. When using the Skoda Kamiq's transmission daily, it's important to observe the following precautions: Do not delay transmission fluid changes for extended periods. Prolonged intervals between changes can damage internal components such as bearings and the transmission housing. Avoid coasting in neutral for long durations. While some experienced drivers of manual transmission vehicles may coast in neutral, doing so in an automatic can cause the transmission to overheat and may result in a jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers shift into the opposite gear while still moving to demonstrate smooth operation, but this practice can severely damage the transmission gears and lead to gear grinding over time. Refrain from frequently climbing steep slopes in Drive (D). Automatic vehicles can overheat under high loads or may upshift prematurely, reducing climbing power. In such situations, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If the automatic vehicle breaks down, employ a flatbed tow truck to transport it while in Neutral (N), rather than using a tow rope or dragging the vehicle directly.
7
2
Share

How to Erect the Wiper?

The method to erect the wiper is: 1. Turn off the car; 2. Press the windshield washer switch within 10 seconds, and the wiper will automatically move to the middle position of the windshield; 3. Use your hand to erect the wiper. The following are the maintenance methods for the wiper: 1. After washing the car, the owner should promptly clean the water on the wiper blade and the glass; 2. Regularly check whether the wiper blade of the vehicle has cracks or damage; 3. When parking outdoors for a long time, erect the wiper. Extended content: The wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its function is to remove rain, snow, and dust on the windshield that obstruct the view.
5
0
Share

Why does the car stall after starting?

Reasons for the car stalling automatically after starting: 1. The car's anti-theft system is triggered, locking the engine, allowing it to start but not run, and the engine stalls when the key is released with the anti-theft light on. This is mostly due to the owner privately making a key without a chip to prevent key loss or the key signal weakening after being dropped, making it unrecognizable by the system; 2. The ignition module is damaged or the ignition reference signal line from the ignition module to the engine computer is damaged; 3. Ignition switch failure: There is power on the ignition line when starting, but power is cut off and the engine stalls when the key is released. This is usually caused by poor contact of the internal contacts of the ignition switch, often accompanied by the dashboard battery light, oil light, and engine fault light not turning on.
17
1
Share

How often should the truck air dryer cartridge be replaced?

When any of the following three situations occur, the dryer cartridge needs to be replaced: 1. A large amount of water can be drained from the air reservoir; after removing the old dryer cartridge, if a certain amount of water is found inside the dryer assembly, it indicates that the dryer cartridge has been ineffective for some time. 2. Oil droplets form at the exhaust port of the air processing unit; 3. The service time exceeds one year. Air leakage has appeared at the bottom of the cartridge, allowing internal moisture to escape through the gaps in the cartridge, creating visible traces around the entire cartridge. Note that when there is a small amount of oil contamination at the exhaust port of the air processing unit, replacement is not necessary as it is a normal drainage phenomenon.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.