Do new cars still have a break-in period now?

1 Answers
ColtonLynn
07/30/25 2:15am
New cars still have a break-in period. Here are the usage methods during the break-in period: 1. Pre-heat the cold engine. Proper warm-up allows the engine oil to lubricate the engine internals better, reducing wear; 2. Shift gears promptly while driving, especially for manual transmission cars. During the break-in period, it's necessary to change gears appropriately to avoid high gear with low RPM or low gear with high RPM situations; 3. New cars require timely maintenance during the break-in period; 4. Although new cars can be driven on highways, it's important to control the operating time. Extended continuous operation of the engine during highway driving in the break-in period increases the risk of component wear.
Was this review help?
6
1
Share
More Forum Discussions

Is it necessary to use 95 octane gasoline for the Mondeo?

92 is sufficient. Here are the specific details of relevant information: Introduction: The 2018 Mondeo has a body length, width, and height of 4873mm, 1852mm, and 1470mm respectively, with a wheelbase of 2850mm. The safety features of the 2018 Mondeo include front and side airbags for the driver and passenger, front and rear head airbags, tire pressure monitoring, seatbelt reminder, ABS anti-lock braking system, brake force distribution, brake assist, traction control, and electronic stability program. Important Notes: The Mondeo can use 95 octane gasoline, but it is recommended to use 92 octane gasoline, as using 95 octane gasoline not only does not provide additional protection for the engine but also does not offer better performance.
18
4
Share

Is GAC Toyota a Domestic or Imported Car Brand?

GAC Toyota's vehicle models are primarily produced domestically, although GAC Toyota is a joint venture brand. This brand offers models such as the Levin, Front Lander, C-HR, and Highlander. Additional Information: 1. GAC Toyota Motor Co., Ltd. (GACTOYOTA), established on September 1, 2004, is a 50-50 joint venture between Guangzhou Automobile Group Co., Ltd. and Japan's Toyota Motor Corporation. 2. Aiming to build a "Toyota Global Model Plant," GAC Toyota Motor Co., Ltd. adheres to Toyota's decades of automotive manufacturing expertise. The company has introduced the world's most advanced production equipment and processes, with near-perfect layouts in five major areas: stamping, welding, resin, painting, and assembly.
10
3
Share

What are the reasons and solutions for unqualified vehicle exhaust emissions?

Reasons and solutions for unqualified vehicle exhaust emissions are as follows: 1. Oxygen sensor failure: There are generally two oxygen sensors, one located behind the exhaust manifold and the other behind the three-way catalytic converter. The oxygen sensor is responsible for detecting the oxygen content in the exhaust. It sends signals to the ECU, which then adjusts the air-fuel ratio based on these signals. If the oxygen sensor is damaged, the ECU cannot accurately adjust the air-fuel ratio, leading to either a too rich or too lean mixture, resulting in unqualified exhaust emissions. Solution: Replace the oxygen sensor. 2. Three-way catalytic converter failure. Solution: Replace the three-way catalytic converter. 3. Poor gasoline atomization. Solution: Replace the gasoline in time. 4. Oxygen sensor malfunction. Solution: The vehicle's oxygen sensor needs to be replaced.
15
4
Share

Is it necessary to cover the car steering wheel?

It is not necessary to cover the car steering wheel. Here are the specific introductions of the steering wheel cover: 1. Good hand feeling: After installing the steering wheel cover, the grip feeling is better. The steering wheel cover has a shock absorption effect. Because the steering wheel itself is too hard, when the vehicle passes through rough sections, the steering wheel will shake violently. 2. Removable and washable: The steering wheel cover is easy to remove and wash. During the whole process of driving, the hand and the steering wheel contact most frequently, and bacteria adhere to the steering wheel. The steering wheel cover is more conducive to absorbing sweat and maintaining a good hand feeling. 3. Protect the original steering wheel: Generally, after long-term use, the surface leather of the steering wheel will be damaged or discolored, which seriously affects the appearance. The steering wheel cover can protect the original steering wheel.
1
3
Share

What are the reasons for the sluggish and weak acceleration in Kia K2?

The reasons for the sluggish and weak acceleration in Kia K2 are fuel-related issues and engine damage. Detailed explanations and solutions are as follows: Fuel problems: Incomplete combustion leads to unstable engine idle speed and increased noise. At the same time, incomplete combustion reduces power performance, causing the driver to unconsciously press the accelerator harder to achieve the original speed. Replace the fuel promptly or reduce the force applied to the accelerator. Engine damage: If the car is in the break-in period, frequently pressing the accelerator hard in low gears or maintaining high RPMs in low gears can cause fatal damage to the engine during this period, which will also increase the vehicle's noise and reduce climbing power in the future. Visit a 4S shop promptly for inspection and repair.
1
3
Share

How to Effectively Practice for Subject One Exam?

Need to consolidate knowledge by revisiting the wrong question bank to eliminate blind spots. Special icon exercises can effectively eliminate knowledge gaps. After accumulating knowledge, start with mock exams.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.