Do new cars in 2020 need to display annual inspection stickers?

Do used cars still require payment of purchase tax?

Used cars do not require payment of vehicle purchase tax. The vehicle purchase tax is levied only once. For vehicles that have already been subject to purchase tax, no additional purchase tax will be levied. The vehicle purchase tax is collected by the State Taxation Administration and must be paid in full at one time. The taxpayer should present the tax payment certificate or tax exemption certificate issued by the competent tax authority to the vehicle management agency of the public security organ for vehicle registration procedures. Without a tax payment certificate or tax exemption certificate, the vehicle management agency of the public security organ cannot process the vehicle registration. When purchasing a used car, the buyer should request the tax payment certificate from the original owner. The tax payment certificate is divided into an original and a copy, issued per vehicle, with one certificate per vehicle. The original is kept by the owner, and the copy is used for vehicle registration. If the new car was not subject to purchase tax when purchased, the new owner will need to pay the purchase tax after the used car transaction. According to Article 11 of the "Vehicle Purchase Tax Law of the People's Republic of China": Taxpayers purchasing taxable vehicles should declare and pay the vehicle purchase tax to the competent tax authority in the vehicle registration area. For taxable vehicles that do not require registration, the taxpayer should declare and pay the vehicle purchase tax to the competent tax authority in their location. Article 12: The tax liability for vehicle purchase tax arises on the day the taxpayer purchases the taxable vehicle, and the taxpayer should declare and pay the vehicle purchase tax within 60 days from the date the tax liability arises. Article 13: The taxpayer should pay the vehicle purchase tax before registering the vehicle with the traffic management department of the public security organ. The traffic management department of the public security organ should verify the vehicle registration information based on the tax payment or tax exemption electronic information provided by the tax authority. After verification, the vehicle registration will be processed according to law. According to Article 4 of the "Vehicle Purchase Tax Law of the People's Republic of China": The vehicle purchase tax rate is 10%. Article 5: The amount of vehicle purchase tax payable is calculated by multiplying the taxable price of the vehicle by the tax rate. Article 6: The taxable price of the vehicle is determined according to the following provisions: For taxpayers purchasing taxable vehicles for personal use, the taxable price is the total amount actually paid to the seller, excluding VAT. For taxpayers importing taxable vehicles for personal use, the taxable price is the customs duty-paid price plus customs duties and consumption tax. For taxpayers producing taxable vehicles for personal use, the taxable price is determined based on the sales price of similar taxable vehicles produced by the taxpayer, excluding VAT. For taxpayers acquiring taxable vehicles for personal use through donation, awards, or other means, the taxable price is determined based on the price stated in the relevant documents when acquiring the vehicle, excluding VAT. Article 7: If the taxable price declared by the taxpayer is significantly low without justifiable reasons, the tax authority will determine the taxable amount according to the "Tax Collection and Administration Law of the People's Republic of China."

7

0

Share

What are the general dimensions of parking spaces?

According to the "Specifications for Setting On-Street Parking Spaces on Urban Roads," the standard dimensions of parking spaces are determined based on vehicle size. Small parking spaces typically measure 2.5~2.7 meters in width and 5~6 meters in length. Single-lane turning lanes should be no less than 3.5 meters wide, while double-lane turning lanes should be no less than 5 meters wide. Turning sections should accommodate a vehicle's ability to make a single turn, and for safety or to accommodate medium-to-large vehicles, they are often set to 6 meters or more. Specific details are as follows: (Length ≤ 6m, width ≤ 1.8m) vehicles: The spacing between vehicles should be no less than 0.5 meters, and the spacing between vehicles and walls or the ends of parking spaces should also be no less than 0.5 meters. (6m < length ≤ 8m, 1.8m < width ≤ 2.2m) vehicles: The spacing between vehicles should be no less than 0.7 meters. Small vehicle parking spaces: Length ≥ 5 meters, width 2.2-2.5 meters. Large vehicle parking spaces: Length 7-10 meters, width 4 meters, depending on the vehicle model. Per the "Code for Design of Garages," the dimensions for small vehicle indoor parking spaces are as follows: The design dimensions for small vehicles are 4.8m (length) x 1.8m (width) x 2.0m (height). For perpendicular parking, the minimum parking space size should be 5.3m (length) x 2.4m (width), with a minimum driveway width of 5.5m at the front. The minimum distance between small vehicles and side walls should be 0.6m, and the minimum distance to front and rear walls should be 0.5m. Modern underground garages have large floor areas and numerous parking spaces. To ensure smooth vehicle passage, driveways are planned to be relatively wide. Driveways, as horizontal passages dedicated to parking spaces, account for the primary floor area allocated to parking spaces and often occupy 50% or more of the total parking space floor area. Parking space arrangements can be categorized into three types: parallel, angled (30°, 45°, 60°), and perpendicular. Large vehicle parking spaces should not use angled or perpendicular arrangements. Specifics are as follows: Parallel parking spaces: Standard length of 6 meters, width of 2.5 meters. Angled parking spaces: Diagonal length of 6 meters, width of 2.8 meters, with a vertical distance between two diagonal lines maintained at 2.5 meters. Perpendicular parking spaces: Length ≥ 5 meters (typically set at 6 meters), width of 2.5 meters. The optimal standard size is 2.5m x 5.3m. The "Road Traffic Safety Law" stipulates that on-street parking spaces should not be set on roads with a width of less than 6 meters for motor vehicle passage. Pedestrian crossings, expressways, and main roads are also prohibited from having parking spaces. Within urban road areas, government authorities may designate parking spaces where pedestrian and vehicle traffic is not impeded. On-street parking spaces should avoid disrupting non-motorized vehicle passage and should not encroach on non-motorized vehicle space. They should not be set near intersections, building entrances, or bus stops. Parking space types and durations should be indicated via signage, and impacts on motor vehicle traffic should be minimized. Additionally, on-street parking spaces should not have ground locks to prevent private occupation. Roads prohibiting on-street parking may have barriers, posts, or curbs installed. After removal or cancellation of parking spaces, all related signs, markings, and facilities should be promptly cleared to prevent continued parking and ensure road safety. Furthermore, on-street parking spaces should not be set within 200m~300m of off-street public parking lots. Quantitative rules for on-street parking space setup: The "Specifications for Setting On-Street Parking Spaces on Urban Roads" provides quantitative rules based on road width. For two-way roads: if the actual road width exceeds 12 meters, parking spaces may be set on both sides; if between 12m and 8m, on one side; if less than 8m, no parking spaces. For one-way roads: if the actual road width exceeds 9 meters, parking spaces may be set on both sides; if between 9m and 6m, on one side; if less than 6m, no parking spaces. For disabled parking spaces, the specifications require that on-street parking spaces should include disabled parking spaces, accounting for no less than 2% of the total. For parking lots with over 20 spaces, at least one disabled parking space should be provided. Parking space marking colors: White: Paid parking spaces; Blue: Free parking spaces; Yellow: Reserved parking spaces; Time-limited parking spaces: Dotted borders, 10cm line width; permitted parking times marked inside the border, with numbers 60cm high. Disabled parking spaces: Special markings; yellow grids on both sides indicate no-parking zones for disabled boarding/alighting areas. Other vehicles must not occupy disabled spaces. Special pavement markings indicate exclusivity. Yellow grid lines: 120cm width; outer line width: 20cm; inner fill line width: 0cm; 45° angle to outer lines; outer line length matches parking space marking length. Prohibited areas for on-street parking spaces: Fire lanes, road sections with no-parking signs/markings, or construction zones impeding traffic; Roads with disaster relief or emergency evacuation functions; Sidewalks (if set, must not encroach on blind paths); Near building entrances; Intersections, railway crossings, sharp curves, narrow roads (<4m), bridges, steep slopes, tunnels, and areas within 50m of these locations; Within 30m of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (except for facility use); Within 20m of intersection channelized areas; Near underground utility access points or within 15m of such locations; Within 200m of off-street parking lot entrances; Near roadside

15

5

Share

How to Repair a Dent Above the A-Pillar?

Pull out (after sanding the dented paint surface, weld and pull out with a heavy hammer), or push out, then sand and level, apply paint after drying. Directly sand, fill the dent, level after drying, and apply paint.

4

1

Share

How to Open the Fuel Tank Cap of A6L?

The fuel tank cap is located on the right side, which is the passenger side. If you want to refuel, you need to align the right side with the fuel dispenser. Walk up to the fuel tank cap and gently press the front part of the cap, which is the side facing the rear of the car.

17

0

Share

How to Obtain a Vehicle License?

You must legally obtain a driver's license. You need to purchase a car to be eligible for a vehicle license. For first-time application of a vehicle license, the owner of the motor vehicle should apply for registration at the local vehicle management office. The owner of the motor vehicle should fill out an application form, present the vehicle for inspection, and submit the required documents.

18

5

Share

How to Open the Elantra Trunk Switch?

Locate the trunk control switch inside the car. Then lift the control switch, and you will hear a "pop" sound, which indicates the trunk is opening. At this point, there will be a larger gap around the trunk, and then you can lift the trunk upwards. Finally, the trunk will be fully open.

14

3

Share

Do new cars in 2020 need to display annual inspection stickers?

Do used cars still require payment of purchase tax?

What are the general dimensions of parking spaces?

How to Repair a Dent Above the A-Pillar?

How to Open the Fuel Tank Cap of A6L?

How to Obtain a Vehicle License?

How to Open the Elantra Trunk Switch?

What to Do If the Vehicle Annual Inspection Expires?

What is the tire pressure of the Dongfeng Fengguang ix5?

What is the problem when the EPC light is on in the Volkswagen Tiguan?

Is Suzuki a Japanese car?