Do I need to pay parking fees when my vehicle is temporarily impounded by traffic authorities?

1 Answers
Nathan
07/30/25 9:46am
No parking fees are required when a vehicle is temporarily impounded by traffic authorities, as the storage costs incurred from seizure or impoundment shall be borne by the administrative agency. In other words, if a driver's vehicle is impounded by traffic police due to illegal activities, the towing and parking fees will be covered by the public security authority, not the vehicle owner. Additional information: According to Article 26 of the Administrative Compulsion Law of the People's Republic of China: For premises, facilities, or property that are sealed or seized, the administrative agency shall properly maintain them and must not use or damage them; if losses occur, the agency shall bear compensation liability. For sealed premises, facilities, or property, the administrative agency may entrust a third party to maintain them, and the third party must not damage or transfer or dispose of them without authorization. For losses caused by the third party, the administrative agency shall first compensate and then has the right to recover from the third party. The storage costs incurred from seizure or impoundment shall be borne by the administrative agency.
Was this review help?
14
3
Share
More Forum Discussions

Why does the wrench icon light up on the dashboard?

The appearance of a small wrench icon (maintenance light) on the dashboard is a reminder for the driver to perform car maintenance. After maintenance, manually reset the icon. Here is some information about the maintenance light: 1. Maintenance light: A reminder function set by the manufacturer to notify the owner to perform maintenance at certain mileage or time intervals, displayed in the form of dashboard or screen messages or indicator lights. 2. Maintenance light reset: After maintenance is completed, reset the reminder information to zero, which means resetting the information. 3. Resetting the maintenance light is a necessary operation after car maintenance: If you forget to reset it, the wrench icon will continue to be displayed on the dashboard even if the car has been maintained.
14
3
Share

How to open the trunk of the Buick GL6?

Buick GL6 trunk opening method: Unlock the vehicle and press the touchpad at the bottom of the tailgate handle above the license plate. More information about the Buick GL6 is as follows: 1. The Buick GL6 is a strategic model for the Buick brand to deepen its layout in the home market. Inheriting the dynamic and elegant design aesthetics of the Buick GL8, the GL6 emphasizes the exclusive visual symbols of Buick MPVs, creating an elegant and spacious trendsetting aesthetic design for home MPVs. The vehicle combines the sophisticated styling of sedans, the flexibility and functionality of SUVs, and the comfort of MPVs. 2. The Buick GL6 features a winged chrome grille that extends through the headlight design, forming a double-layer combination of winged LED headlights, a floating roof, hidden D-pillars, and a unique streamlined window design that extends from the A-pillar to the rear, flowing seamlessly to the tail, resulting in a smooth overall shape. 3. The Buick GL6 has a long wheelbase of 2796mm, providing ample interior space to ensure comfortable seating and storage capacity.
6
2
Share

What Causes Engine Shaking When Accelerating?

Engine shaking when accelerating can be caused by many reasons, which can be summarized as follows: 1. Engine malfunction: The engine may have a misfiring cylinder or a broken high-voltage wire, leading to shaking. 2. Excessive carbon deposits inside the engine: The gasoline sprayed by the cold start injector is largely absorbed by carbon deposits, resulting in a lean mixture during cold starts, making it difficult to start and causing shaking. 3. Damaged spark plugs: Worn electrode gaps in the spark plugs lead to insufficient ignition, causing incomplete combustion of the air-fuel mixture and resulting in engine shaking when accelerating. 4. Poor gasoline quality: Low-quality gasoline affects the atomization effect of the fuel injectors, leading to incomplete combustion of the mixture in the cylinder, which can cause idle shaking.
4
0
Share

What is the function of the drive axle?

The main functions of the drive axle are as follows: 1. Through the transmission of the main reducer gear, it reduces speed and increases torque; 2. Uses bevel gear transmission to change the direction of torque transmission; 3. Through the differential, it allows the inner and outer wheels to rotate at different speeds to meet the steering requirements of the vehicle; 4. Through the axle housing and wheels, it achieves load-bearing and force transmission. Below is a partial introduction to the drive axle: 1. The drive axle consists of the main reducer, differential, wheel transmission device, and drive axle housing. 2. The drive axle is an important component of the transmission system, responsible for the functions of speed reduction, torque increase, and directional differential.
14
1
Share

What does 'int' mean on a car?

Rain wiper 'int' stands for automatic intermittent wiping function. When the lever is switched to this position, the wipers will operate automatically. Here is some information about the automatic intermittent function of wipers: 1. The automatic intermittent working position of car wipers can adjust the swinging frequency, making the wiper swing frequency vary according to the vehicle speed. 2. When the wiper lever is placed in the 'automatic intermittent swing' position, the wipers will change their swinging frequency according to the vehicle speed based on the adjusted frequency. 3. There are mainly two types of swinging frequency adjustment mechanisms: toggle type and rotary knob type.
5
3
Share

What are the causes of engine misfire?

The following are the causes of engine misfire: 1. Spark plug issues: clogged or damaged; 2. Cylinder wire issues; 3. Ignition coil issues; 4. Fuel injector issues: clogged or low voltage causing DME internal injector data loss; 5. Air-fuel mixture issues; 6. Cylinder pressure issues. The following is an analysis of engine misfire faults: 1. Engine misfire monitoring: To prevent excessive exhaust emissions and thermal damage to the catalytic converter, the engine control unit uses the crankshaft position sensor to monitor deviations in engine rotation speed to determine misfire, and the camshaft position sensor to identify the misfiring cylinder. 2. Classification of engine misfire: Engine misfire can be simply divided into two situations, one is complete misfire, meaning no combustion, and the other is partial misfire, meaning unstable combustion.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.