Do I need to cancel the ETC account when transferring a car?

1 Answers
DiEmiliano
07/30/25 8:42am
Yes, you need to cancel the ETC account when transferring a car. There are several situations and corresponding handling methods: 1. New car with new license plate: If both the vehicle and license plate have been changed, the owner should first go to the bank to unbind the original ETC-linked bank card, and then apply for a new ETC for the new car. 2. New car with old license plate: If the car is replaced but the license plate remains the same, simply take the ETC device to the service outlet and ask the bank to modify the license plate number, engine number, etc., and then reinstall it. 3. Cancellation after transfer: If the original owner wants to cancel the ETC after the vehicle is transferred, they can also apply for cancellation.
Was this review help?
12
0
Share
More Forum Discussions

What is the Correct Method for Starting a Car?

Correct car starting method is: 1. Fully depress the clutch, turn the ignition key to the ON position, wait for 5 to 8 seconds, then turn the key to the start position to ignite the engine; 2. Once the engine starts smoothly, immediately release the ignition key to let it automatically return to the ON position. Car starting precautions: Do not press the accelerator when starting. Before the key is turned to the ON position for power, the engine's idle motor, throttle sensor, oxygen sensor, temperature sensor, and a series of other sensors are not powered. When these sensors are powered, they will automatically adjust and adapt to an optimal position and parameters under the guidance of the computer based on the state of various engine components. This automatic adjustment and adaptation often require a certain amount of time.
10
5
Share

What Are the Causes of Steering Wheel Vibration?

The causes of steering wheel vibration: 1. When driving at speeds between 80 to 90 km/h, the steering wheel vibrates, but returns to normal when exceeding 90 km/h: This is caused by deformation or issues in the vehicle's drivetrain; 2. Steering wheel vibration when encountering bumpy roads: This occurs due to loose ball joints, detached rubber bushings at connection points, or irregular tire wear during driving; 3. Sudden steering wheel vibration during high-speed driving: This results from excessive or frequent braking, causing the brake discs and pads to overheat and deform upon cooling; 4. Steering wheel vibration when stationary: This is caused by aging engine mounts and rubber components at connection points.
19
3
Share

What Causes a Car with Power to Fail to Start?

The reasons why a car has power but fails to start are: 1. The steering wheel is locked; 2. Insufficient fuel in the car; 3. The car battery is depleted; 4. Incorrect connection of the positive and negative terminals; 5. Wrong gear selection; 6. Starter motor malfunction; 7. Excessive carbon buildup in the throttle; 8. Faulty crankshaft position sensor. Solutions for a car with power that fails to start: 1. Check the battery power level; if insufficient, replace the battery or charge it promptly; 2. Check if oil flow is obstructed, move the car to a warmer location to raise the temperature, enhance maintenance, and change the oil in a timely manner; 3. Drain any accumulated water in the exhaust pipe; 4. Inspect the condition of the antifreeze; 5. Clean the fuel lines promptly and replace the fuel filter.
19
1
Share

How to Remove Fog from Car Windows?

Methods to remove fog from car windows include: 1. Preventive measures like spraying anti-fog agents. Spray a small amount of defogger on the car windows and wipe it clean to remove dirt and stains from the glass; 2. Air conditioning cooling method. Use the air conditioning's dehumidification function to reduce air humidity and eliminate fog; 3. Air conditioning heating method. Reduce the temperature difference to remove condensation. Note that whether the air conditioning is automatic or manual, turning it on helps with dehumidification. Avoid setting the air conditioning temperature to the coldest position, as prolonged use may cause frost to form on the outer side of the windshield.
1
5
Share

What to Do When the Window Sealing Strip Ages?

When the window sealing strip ages, it needs to be replaced promptly. The window sealing strip is an accessory used to seal around the car door, improving airtightness and preventing wind and rain from entering the cabin. Once the door sealing strip ages and becomes damaged, it will increase the wind noise during driving, cause cabin leakage, and lead to rust on the car body. The door sealing strip is mainly made of ethylene propylene diene monomer (EPDM) rubber, which has good elasticity, resistance to compression deformation, aging, ozone, and chemical effects, as well as a wide range of operating temperatures. It is foamed and densely compounded, containing unique metal clamps and tongue-shaped buckles, making it sturdy, durable, and easy to install. The door sealing strip is mainly used on car doors, side windows, front and rear windshields, engine hoods, and trunk lids, serving functions such as waterproofing, dustproofing, sound insulation, temperature insulation, shock absorption, and decoration.
1
1
Share

What are the basic functions of an automotive transmission system?

The basic function of an automotive transmission system is to transmit the power generated by the engine to the driving wheels. The primary task of the transmission system is to work in coordination with the automobile engine to ensure normal operation under various driving conditions, while maintaining good power performance and fuel economy. The power generated by the automobile engine is transmitted to the driving wheels through the transmission system. The transmission system features functions such as deceleration, speed change, reversing, power interruption, inter-wheel differential, and inter-axle differential. Working in conjunction with the engine, it ensures the vehicle operates normally under various working conditions while delivering excellent power performance and economic efficiency.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.