Do I need to bring my ID card for the Subject 2 driving test?

3 Answers
DeAlice
07/24/25 5:25am
You need to bring your ID card for the Subject 2 driving test. Here is some information about the driver's license: Introduction to the driver's license: The full name of the driver's license is the motor vehicle driving license, also known as the "driver's license". It is a certificate required by law for motor vehicle drivers. Driving test subjects: Subject 1 covers traffic regulations and related knowledge, with a perfect score of 100, and a passing score of 90 or above. Subject 2 is the field driving test, which is only marked as pass or fail. Subject 3 is the road driving test, which is conducted entirely under electronic surveillance and monitored by traffic police, making the test more fair. Subject 4 is a theoretical test on safe and civilized driving knowledge.
Was this review help?
5
3
Share
DeCora
08/10/25 11:27pm
Having been in driver training for many years, I fully understand the crucial rules of the Subject 2 test. You must bring your ID card, as the test center uses it to verify your identity and ensure that the examinee is the actual candidate. If you forget to bring it, the staff will likely deny you entry to the test site, resulting in cancellation of the test. You would then need to reschedule and pay additional fees, which wastes both time and morale. I’ve seen many students make this mistake and end up with a wasted trip. Moreover, carrying an ID is a basic requirement—driving schools usually remind students to bring their admission tickets or other documents, but the ID card is the core item. Before the test, it’s best to place it in your bag or pocket to avoid forgetting it in a moment of nervousness. The entire Subject 2 test includes parking, hill starts, and more—stay relaxed but don’t overlook the details. Safe driving starts with these small habits, and developing good practices will benefit your driving skills.
Was this review help?
15
4
Share
Expand All
Vera
09/24/25 6:41am
For the Subject 2 driving test, my personal experience is that you must bring your ID card. On the exam day, the staff at the entrance will carefully check the photo and name on the ID to confirm it's really you taking the test. If you forget it, they might not let you in. I've heard of friends being turned away for this reason, having to reschedule and wasting a whole day. So, prepare your ID in advance, put it in your wallet or a fixed spot, don't wait until the last minute to scramble. Subject 2 mainly tests skills like reverse parking, and the process is already stressful enough—don't let a small hiccup like forgetting your ID add to the chaos. Also, I recommend arriving early to avoid rushing while queuing. In short, bringing it is a small thing that ensures a smooth test.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What to do when the dashboard shows EPC?

ESP is the abbreviation of Electronic-Stability-Program, translated into Chinese as "Electronic Stability Program". It analyzes the vehicle driving state information transmitted from various sensors. Reasons and solutions for the dashboard displaying EPC: 1. The throttle is too dirty and should be cleaned. 2. The brake light is not working, requiring inspection of the brake switch and wiring. 3. Fuel quality issues can also cause the EPC warning light to illuminate, necessitating the use of qualified gasoline. 4. Insufficient battery power can also trigger the EPC warning light.
13
4
Share

What brand is the car with five bars?

The electric car with a logo of five vertical bars is WM Motor. Here is some relevant information: 1. WM Motor (WM-Motor) was established in January 2015 (formerly a three-electric system R&D enterprise founded by co-founder Du Ligang in 2012) and is committed to promoting the development and implementation of smart mobility. 2. The logo with five vertical bars was also used by Fiat in the mid-1980s. During the 1980s, Fiat's best-selling models included the Panda, Uno, and Croma. By the mid-1980s, these models required updates, leading to the creation of the five-bar logo. In the early 1980s, Fiat acquired Alfa Romeo, and the redesigned five-bar logo was somewhat related to Alfa.
11
4
Share

What time are express coaches prohibited from traveling?

Highways enforce a mandatory rest period for long-distance coaches from 2:00 AM to 5:00 AM. After 2:00 AM, long-distance coaches are prohibited from entering the highway via toll booths. During this period, coaches already on the highway are guided to the nearest service area or passenger station for rest. When driving normally on the highway, motor vehicles must adhere to the following regulations: 1. No reversing, driving in the opposite direction, or crossing the central divider to make a U-turn or turn. 2. No test driving or learning to drive a motor vehicle. 3. No overtaking or parking on ramps, acceleration lanes, or deceleration lanes. 4. No straddling or driving continuously on lane dividers or overtaking lanes. 5. No overtaking on the right. 6. Except in cases of obstacles or malfunctions requiring a stop, no arbitrary stopping, picking up/dropping off passengers, or loading/unloading goods. 7. Except for entering or exiting emergency stopping lanes or shoulders, no driving on emergency stopping lanes or shoulders.
1
3
Share

How to Remove the Headlight Switch of Passat?

Here is the method to remove the headlight switch of Passat: 1. Before starting the removal, turn off the car's ignition switch, press the combination switch with your fingers. 2. Turn the switch to the right, then pull it outward. 3. The headlight switch of Volkswagen cars does not require any removal tools and can be manually operated to remove the switch. Below is an introduction related to the lights: 1. Passat's light switches include two types, one is a rotary knob type, and the other is a lever type. The rotary light switch is located on the instrument panel at the lower left position of the driver's seat, while the lever switch is located on the left side of the steering wheel. The rotary knob switch includes front fog lights, rear fog lights, width lights, low beam lights, and a light-off button. Next to the knob, there is also a light height adjustment button, which can adjust the light projection height according to actual needs. 2. The lever-type light has the function of turning and switching between high and low beams. Turn the lever clockwise, the right turn signal lights up; turn the lever counterclockwise, the left turn signal lights up. After the turn is completed, the turn lever will automatically reset to its normal position. When the light combination switch is turned to the low beam, the low beam indicator light turns on. Press the light combination lever downward, the high beam indicator light turns on, and the high and low beams can be switched at any time.
7
4
Share

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

Here are the steps to handle the loss of a vehicle annual inspection sticker: If the annual inspection sticker is lost, it can be reissued. Bring the original and a copy of the vehicle registration certificate and the owner's ID card to the local vehicle management office or inspection station in the city where the vehicle is registered. You will need to fill out a reissuance application form explaining the reason for the reissuance. Once approved, a new annual inspection sticker will be printed on-site. Note: In addition to the annual inspection compliance sticker, the upper right corner of the vehicle's front windshield should also display the insurance sticker and the environmental protection sticker to legally drive on the road. According to the "Road Traffic Safety Law," all vehicles on the road must display the current year's inspection sticker in a visible position on the upper right corner of the front windshield. Vehicles that fail to display the annual inspection compliance sticker as required will be penalized with a 1-point deduction and a fine of 50 yuan.
15
4
Share

How to adjust the fog lights on the Mazda3 Axela?

Mazda3 Axela fog light switch is located on the lighting switch assembly on the left side of the steering wheel, and the fog lights can be turned on or off by rotating the knob. Here is more information about fog lights: 1. The function of fog lights is to make other vehicles see your car in foggy or rainy weather when visibility is greatly affected by the weather. Therefore, the light source of fog lights needs to have strong penetration. 2. Most vehicles use halogen fog lights, and LED fog lights are more advanced than halogen fog lights. Extended content: The following is the classification of car lights: 1. Headlights. Combined headlights are located at the front of the car, mainly serving the purpose of lighting and signaling. The light emitted by the headlights can illuminate the road conditions in front of the car body, allowing the driver to drive safely at night. 2. Combined taillights. Combined taillights are located at the rear of the car, mainly serving the purpose of lighting and signaling. 3. Turn signals. Used to indicate to other road users that the vehicle is turning left or right. 4. License plate lights. License plate lights mainly illuminate the license plate, allowing people to identify the vehicle license plate at night.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.