Differences Between the 2019 and 2017 Teramont Models?

1 Answers
LaAnderson
07/29/25 8:49pm
The differences between the 2019 and 2017 Teramont models are as follows: different maximum torque, different maximum power, and different engines. Below are the relevant details comparing the 2019 and 2017 Teramont: 1. Different maximum torque. 2019 model: maximum torque of 350 Nm; 2017 model: maximum torque of 320 Nm. 2. Different maximum power. 2019 model: maximum power of 162 kW; 2017 model: maximum power of 137 kW. 3. Different engines. 2019 model: equipped with the EA888-CUG engine; 2017 model: equipped with the EA888-DBF engine.
Was this review help?
8
3
Share
More Forum Discussions

What are the reasons for the fuel pump not starting?

Here is an introduction to the reasons why the fuel pump cannot start: 1. Use of inferior fuel: Improper refueling behavior may damage the fuel pump. Inferior fuel is the main culprit that accelerates fuel pump failure, along with issues related to the quality of the parts themselves. Human operation may also cause damage. 2. Low fuel level: The fuel pump motor is not fully cooled and lubricated, which can lead to overheating or even shutdown. If the fuel pump frequently operates in this condition, premature damage is inevitable. 3. Poor fuel quality: The fuel tank may contain various impurities or foreign objects. The fuel pump draws fuel through the filter at its bottom and pumps it into the engine.
15
3
Share

How to Replace the Battery in a GAC Trumpchi GS5 Key Fob?

First, remove the mechanical key from the smart key. The smart key is the L-shaped key. Carefully observe the top of the smart key, which has deep and shallow grooves. Use this L-shaped key to pierce the shallow groove of the smart key all the way down. You will notice that the back cover of the smart key will automatically pop open. Remove the old battery, replace it with a new one, then reattach the back cover and the mechanical key. The battery in this car key typically lasts 2-3 years. If it runs out of power, replace it promptly.
19
5
Share

How to Turn on the Heater in a Geely Emgrand?

Press the first button on the control panel to activate the blower function. At this point, the central control screen will display the air conditioning control interface. Slide the bar up and down to set the desired temperature. If the set temperature is higher than the outside temperature, warm air will be blown out. After setting the temperature, click the AUTO button to automatically perform constant temperature operation. Manually click the bottom slider to adjust the airflow volume. For heating, according to the principle of warm air rising, you can set the air direction to foot mode.
13
1
Share

How to adjust hot and cold air in Mercedes-Benz C260L?

For manual air conditioning, the temperature adjustment buttons: blue represents cold, red represents warm, and the middle represents moderate temperature. When warm air is needed, adjust towards the red direction to select the appropriate temperature. After the engine water temperature normalizes, warm air can be blown out. When warm air is needed, adjust towards the red direction to select the appropriate temperature. After the engine water temperature normalizes, warm air can be blown out. If cold air is needed, press the AC or AUTO button when the outdoor temperature is above approximately 0 degrees Celsius to activate the cold air.
18
2
Share

How to Cancel the Maintenance Reminder on Ford Escort?

To cancel the maintenance reminder on Ford Escort, simply power on the vehicle and simultaneously press the TRIP and RESET buttons. The Escort is a compact sedan under the Ford brand, with body dimensions of 4587mm in length, 1825mm in width, and 1490mm in height, with a wheelbase of 2687mm. The Escort features multi-directional airbag protection, including front dual airbags, side airbags, and side curtain airbags. The entire Escort lineup is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 90kW, peak torque of 152Nm, with maximum power achieved at 6500rpm and peak torque at 4500rpm.
10
3
Share

Why can't the throttle exceed 2500 RPM?

Here are the reasons why the throttle cannot exceed 2500 RPM: 1. Fuel system blockage: If the fuel system is clogged, such as the injector, fuel filter, or fuel quality, the fuel system needs to be cleaned. 2. Intake system blockage: Components like the air filter or mass airflow sensor may prevent proper combustion with fuel, requiring the intake system to be cleaned. 3. Poor ignition system performance: Issues with spark plugs or high-tension wires necessitate inspection of the ignition system. 4. Poor fuel quality: There might be an issue with the fuel. If you recently refueled and the problem didn't exist before, there's a 70% chance the fuel from the gas station is problematic—possibly diluted with water or other liquids. In this case, you should switch to higher-quality fuel.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.