Correct Method for Defogging the 2021 Sagitar

What to Do When the Vehicle Fan Doesn't Rotate?

Reasons why the vehicle fan doesn't rotate include: 1. The car's water temperature hasn't reached the required level: The fan will only start rotating normally when the internal water temperature reaches the appropriate level. If the temperature is too low, the radiator fan won't rotate. Solution: Inspect and repair the car's engine. 2. Relay failure: If the water temperature meets the requirement but the car's radiator fan still doesn't work, the issue might be with the fan's relay. A faulty relay will prevent the radiator fan from operating. Solution: Replace the damaged relay. 3. Thermostat switch malfunction: Any issues with the thermostat switch can also affect the operation of the car's radiator fan. Solution: Replace the damaged thermostat switch.

15

0

Share

Does the BYD F3 base model come with airbags?

BYD F3 base model comes with airbags. However, only the driver and front passenger seats are equipped with airbags. The functions of airbags are as follows: In the event of a car collision, airbags can evenly distribute the impact force across the head and chest, preventing direct contact between passengers' bodies and the car body, significantly reducing the likelihood of injury. According to statistics, in frontal collisions involving vehicles equipped with airbags, the severity of passenger injuries can be reduced by up to 64%, with even 80% of passengers not wearing seatbelts. This demonstrates the crucial protective role airbags play in vehicle safety. How airbags work: Based on signals from sensors, the system identifies and assesses the collision intensity. When the collision intensity meets the design conditions, the airbag inflator rapidly triggers the ignition device to detonate nitrogen solid particles, forming a rapidly expanding air cushion to mitigate the impact force experienced by passengers.

15

4

Share

Why does one rear brake light not light up but works when tapped?

The reason why one rear brake light does not light up but works when tapped may be due to poor internal contact of the brake switch. It is necessary to check the wiring and connector of the abnormal brake switch. Brake lights are generally installed at the rear of the vehicle, with the main body color being red to enhance the penetration of the light source, so that vehicles behind can easily detect the braking of the vehicle in front even in low visibility conditions, thereby preventing rear-end collisions. Information about brake lights is as follows: 1. In simple vehicle models, power passes through a fuse to the brake switch. When the brake pedal is pressed for braking, the switch connects, and electricity is sent to two brake lights and one high-mounted brake light, forming a circuit through the negative line connected to the vehicle body. 2. Depending on the materials used to make the brake lights, they can be roughly divided into gas brake lights and LED brake lights.

16

1

Share

Can the Peugeot 408 battery be disconnected during replacement?

When replacing the battery of a Peugeot 408, it is safer to disconnect the battery terminals when the vehicle is in a dormant state. First, open the engine hood, remove the key, and then proceed with the replacement. Peugeot 408 battery lifespan: Generally, it can last 2-5 years. The battery should be replaced when its charge and discharge performance degrades to a certain level. First, remove the air filter and air filter box. Use a screwdriver to detach the pipe connected to the throttle, then use a Torx bit to remove the air filter cover. Shake off any dust from the air filter. After removing the air filter box, you'll see the 6AT transmission underneath. Pull the battery cover diagonally upward to remove it, then use a socket wrench to disconnect the positive terminal. After removing both the positive and negative terminals, the battery can be taken out. Battery maintenance tips: Wipe the exterior of the battery with a damp cloth to remove dust, grease, white powder, and other contaminants that may cause leakage from the panel and terminals (positive and negative poles). Open the battery water refill caps to check if the water level is normal. Verify that the battery is charging properly.

16

0

Share

How many liters of transmission oil are needed for a Volkswagen Touran transmission oil change?

Volkswagen Touran transmission oil change requires 4 liters. The precursors for transmission oil change are: body shaking, gear shifting jerking; the dashboard shows a transmission high-temperature warning; the car stalls; abnormal noises occur. Different vehicle models have different replacement cycles. The following are the replacement cycles for transmission oil: Manual transmission: Manual transmission oil is generally recommended to be replaced every three years or about 100,000 kilometers. Automatic transmission: Automatic transmission oil is generally recommended to be replaced every two years or about 40,000 kilometers. Continuously variable transmission (CVT): CVT transmission oil is generally recommended to be replaced every two years or about 60,000 kilometers. The method for changing the transmission oil of a Volkswagen Touran is as follows: Unscrew the drain screw at the bottom of the transmission to drain the oil and then refill. Directly remove the transmission oil pan to drain the oil and refill: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulating machine to change the automatic transmission oil: Using an intelligent circulating machine for dynamic oil change can filter and clean the sludge and impurities inside the automatic transmission.

9

3

Share

Does the Santana have a lock confirmation sound?

The Santana has a lock confirmation sound, which can remind the owner whether the car is locked. To enable the lock confirmation sound function, select the lock option in the car's onboard computer settings and click 'lock on'. Methods to activate the lock confirmation sound: Set via the car's central control. Find the 'Vehicle Settings' option in the car's system, then enter the 'Control Page', and turn on the 'Lock Confirmation Sound' on the control page. The horn will sound once when the car is locked; Set via the key. If the car key has a mute button, simply press the mute button towards the car to turn the lock confirmation sound on or off; Change ECU settings. If there is no mute button on the car and it cannot be set in the car's system, you can only go to the 4S store to ask a technician to change the ECU data. Reasons why the lock confirmation sound does not sound: If there is no confirmation sound when locking the car, it may be because the mute button on the key was accidentally pressed. When the owner presses the mute button, the car's lock confirmation sound will disappear. At this time, just press the lock mute button towards the car again to turn on the lock confirmation sound. If the car still does not have a confirmation sound when locking after the owner presses the mute button, it proves that the buzzer is damaged, and the only solution is to replace the buzzer.

11

3

Share

Correct Method for Defogging the 2021 Sagitar

What to Do When the Vehicle Fan Doesn't Rotate?

Does the BYD F3 base model come with airbags?

Why does one rear brake light not light up but works when tapped?

Can the Peugeot 408 battery be disconnected during replacement?

How many liters of transmission oil are needed for a Volkswagen Touran transmission oil change?

Does the Santana have a lock confirmation sound?

What are the classic colors of BMW?

Are the Outlander transmission and the X-Trail transmission the same?

How to Drive Curves Without Crossing the Line?

Where is the handbrake located on the Mercedes-Benz SLK?