Can You Turn on the Air Conditioning While Charging an Electric Vehicle?

How to Revive a Starved Electric Vehicle Battery?

To revive a starved electric vehicle battery, follow these methods: 1. Charge the battery in parallel with a set of good batteries and observe if the battery becomes hot. If it does, unplug the charger, wait for 1 hour, and then charge again for 20 minutes. Repeat this cycle 3 times before fully charging the battery. 2. Check if the battery is low on water. If it is, add distilled water and charge it at one-tenth of the rated current until fully charged. Then discharge it at one-tenth of the rated capacity until completely discharged. Repeat this cycle 3 times. 3. Use a high-power charger and high current to charge the battery. Stop charging if the battery becomes hot and resume charging once the temperature drops. Repeat this process for 2 to 3 days, and there is a certain probability of reactivation.

2

1

Share

What is the Difference Between Two-Wheel Drive and Four-Wheel Drive?

The differences between two-wheel drive and four-wheel drive: 1. Different driving methods: Two-wheel drive has two wheels as the driving wheels, connected to the vehicle's power system; four-wheel drive maintains all four wheels as driving wheels throughout the entire driving process. 2. Different differentials: The two-wheel drive differential allows the front and rear driving wheels to rotate at different speeds; in four-wheel drive, to drive all four wheels, all wheels need to be connected, and a central differential is added to adjust the speed difference between the front and rear wheels. A two-wheel drive vehicle uses either the rear wheels (or front wheels) as the driving wheels, with the front wheels (or rear wheels) as the driven wheels, and the driving and driven wheels remain fixed. A four-wheel drive vehicle can use either the rear wheels or the front wheels as the driving wheels, but not both the rear and front wheels simultaneously as driving wheels.

11

3

Share

What materials are needed for renewing an expired driver's license?

The materials required for renewing an expired driver's license are: 1. One copy of the motor vehicle driver's license application form; 2. Original and one copy each of ID card and driver's license; 3. For drivers with non-local household registration, original and one copy of temporary residence permit are required; 4. Medical certificate of physical condition issued by a county-level or above medical institution or a military medical institution at or above the regimental level; 5. Three one-inch white background color photos. Regulations on the Application and Use of Motor Vehicle Driver's Licenses: Motor vehicle drivers should apply for license renewal at the vehicle management office of the driver's license issuing place or elsewhere within 90 days before the expiration of their motor vehicle driver's license. The full name of the driver's license is the motor vehicle driver's license, also known as 'driver's license', which is the license required by law for motor vehicle drivers.

16

1

Share

What is Wheelbase?

Wheelbase refers to the distance between the center of the front axle and the center of the rear axle of a vehicle, measured as the distance between two vertical lines passing through the centers of adjacent wheels on the same side of the vehicle and perpendicular to the vehicle's longitudinal symmetry plane. The length of the wheelbase is a very important parameter, as it significantly impacts both the ride comfort and performance of the vehicle. Additionally, it determines the vehicle's center of gravity. When choosing between a long or short wheelbase, it is advisable to base the decision on your specific driving needs. For family use, opting for a long-wheelbase version is generally a better choice. If you have minimal requirements for passenger space and desire a more dynamic driving experience, you may consider the short-wheelbase version.

9

1

Share

What should be paid attention to when driving on the highway for the first time?

For the first time driving on the highway, the following points should be noted: 1. Conduct a vehicle inspection in advance, focusing on fuel, engine oil, tire pressure, lights, etc., and plan the route. It is also advisable to have an experienced driver with at least 3 years of driving experience accompany you; 2. The minimum speed on the highway should not be less than 60 km/h, and the maximum speed should not exceed 120 km/h. Do not drive below the speed limit. Driving below the minimum speed limit on the highway will result in a 3-point penalty; 3. Follow road signs and drive correctly in the appropriate lane. If you need to overtake, always signal in advance, check the rearview mirror, and then move into the overtaking lane. After completing the overtaking, follow the same steps: signal in advance, check the rearview mirror, and then return to the driving lane; 4. Maintain a safe distance. For novice drivers, due to lack of driving experience, misjudgments are more likely to occur. Therefore, it is important to control the speed and keep a considerable distance from the vehicle ahead. If you follow too closely, you may not have enough time to brake in case of any sudden situation with the vehicle in front.

9

2

Share

Is There Any Damage to the Car When the Front Underbody Makes a Loud Clunking Sound?

If the front underbody makes a loud clunking sound, you should get out of the car to check for any fluid leakage. If there is no leakage and the car drives normally, the issue is not serious. However, if the underbody is severely impacted, a comprehensive underbody inspection is necessary, especially focusing on the front part of the vehicle, which includes the engine, transmission, oil pan, etc. Severe impacts may cause oil pan leakage, transmission damage, or abnormal noises in the drivetrain, leading to significant harm to the vehicle. After a severe underbody impact, if the oil pickup tube is damaged, affecting oil supply, the engine may produce abnormal noises (due to oil shortage). In such cases, do not continue driving; contact roadside assistance immediately. To prevent underbody impacts, you can take measures from two aspects: protective equipment and driving techniques. 1. Install underbody armor. 2. Install an engine guard. From a driving technique perspective, to protect the underbody, slow down when encountering speed bumps or rough roads, and always observe road conditions carefully when driving on unfamiliar routes, driving with caution.

17

5

Share

Can You Turn on the Air Conditioning While Charging an Electric Vehicle?

How to Revive a Starved Electric Vehicle Battery?

What is the Difference Between Two-Wheel Drive and Four-Wheel Drive?

What materials are needed for renewing an expired driver's license?

What is Wheelbase?

What should be paid attention to when driving on the highway for the first time?

Is There Any Damage to the Car When the Front Underbody Makes a Loud Clunking Sound?

Which region in Henan does the license plate prefix 'Yu V' belong to?

What Causes the Abnormal Noise When Braking?

What is the 0-100km/h acceleration time of the Qiantu K50?

What does it mean when the EPB light is on?