Can You Still Drive When the Wrench Light Is On?

1 Answers
OAaron
07/29/25 11:11pm
The wrench light being on does not mean you cannot drive. The purpose of the wrench light is to remind the owner to perform scheduled maintenance, not to indicate a vehicle malfunction. The maintenance reminder light automatically illuminates after a certain mileage. After maintenance is performed, this indicator will disappear. If the small wrench symbol still appears after maintenance, you can turn the key to the vehicle's power-on position, press and hold the button on the dashboard for 10 to 15 seconds without releasing it, and the small wrench light will be reset. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing.
Was this review help?
10
1
Share
More Forum Discussions

What is the emission standard of the Envision?

The emission standard of the Envision is China 6. Appearance: The Envision has a length of 4686 mm, a width of 1839 mm, and a height of 1691 mm, with a wheelbase of 2750 mm. Power: The Envision is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. Configuration: The Envision uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear. The multi-link suspension enhances the vehicle's handling and ride comfort. It is an improved version of the double-wishbone suspension, where the two wishbones are replaced with separate links.
6
1
Share

What is the ground clearance of the GAC Trumpchi M8 chassis?

The ground clearance of the GAC Trumpchi M8 chassis is approximately 200 millimeters. Introduction to vehicle minimum ground clearance: Vehicle minimum ground clearance, also known as chassis height, is defined as the distance from the lowest point of the car's chassis to the ground when the vehicle is fully loaded. The ground clearance data reflects the vehicle's ability to pass through complex terrains. In previous standards, there were certain regulations for minimum ground clearance, usually between 150 and 160 millimeters, but this standard has now been abolished. Impact of minimum ground clearance: The minimum ground clearance of ordinary cars is generally within the range of 11-15 centimeters. For this parameter, the greater the ground clearance (generally referring to more than 13 centimeters), the better the passing performance of the car, but the worse the high-speed stability; the smaller the ground clearance (less than 110 millimeters), the better the high-speed stability, but the worse the passing performance. Nowadays, there is an automatic adjustment function for ground clearance, which is only available in cars equipped with air suspension, and can well meet the needs of different road surfaces.
12
5
Share

Where is the motor relay for the Mercedes-Benz C200 located?

The motor relay for the Mercedes-Benz C200 is located in the control cabinet or control box. Exterior of the Mercedes-Benz C200: The front face of the Mercedes-Benz C200 is stylish and fashionable, with the headlights incorporating warm-toned light sources, creating a very elegant visual effect. Performance of the Mercedes-Benz C200: The Mercedes-Benz C200 is a front-engine, all-wheel-drive version, equipped with the M274 920 four-cylinder 2.0 direct-injection turbocharged engine, with a maximum power output of 184 kW and a maximum torque of 300 Nm. It can sustain maximum torque output from 1200 rpm up to 4000 rpm. It is paired with a 7-speed AT automatic transmission.
7
2
Share

Will flashing S4 software on an Audi A4L affect the warranty?

Flashing S4 software on an Audi A4L will not affect the warranty. Maintenance cycle: Authorized dealerships determine the vehicle maintenance cycle based on local driving conditions. For certain components, the maintenance cycle may differ from the intervals recommended in the official manual. Maintenance precautions: If the local environment is harsh or road conditions are poor, the maintenance cycle should be appropriately shortened, especially for the air filter element and cabin air filter element. Additionally, ensure the correct specifications and high-quality fluids are used. The replacement of brake pads, wiper blades, batteries, tires, etc., depends on wear and tear, so regular inspections are essential. Maintenance items: Primarily include engine oil and oil filter replacement, cabin air filter replacement as needed, battery inspection, brake pedal and parking brake check, brake pads and brake disc inspection, brake fluid and clutch fluid check, tire and tire pressure inspection, and inspection of lights, horn, wipers, and washer jets.
18
1
Share

What Grade of Gasoline Should a Haval Car Use?

Haval cars should use 92-octane or higher gasoline. Do not overfill the tank: Overfilling the gasoline tank can easily block the vent hole. Once the vent hole is blocked, the air pressure inside the tank will drop below normal, leading to poor fuel supply or even a complete lack of fuel. Overfilling also increases the vehicle's weight, thereby increasing fuel consumption. Additionally, gasoline can deteriorate, posing a safety hazard. Avoid waiting for the low fuel warning: While driving, always monitor the fuel gauge. When the gauge shows only a quarter of the tank remaining, it's time to refuel. If the tank is left empty for too long, the temperature difference between the inside and outside can cause moisture to form inside the tank. This moisture can corrode the tank, degrade fuel quality, and increase the engine's workload.
15
2
Share

Where is the production date of a Skoda?

The production date of a Skoda is located on the vehicle's identification plate, which is usually found on the right B-pillar or inside the engine compartment. Introduction to the vehicle identification plate: The vehicle identification plate is a label that indicates the basic characteristics of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, production number, production date, and manufacturer's name. Function of the vehicle identification plate: The production date can be determined by the user or by checking the vehicle identification plate, as the plate in the driver's compartment will always display the vehicle's production date. It is generally placed in an easily visible location at the front of the vehicle, while for buses, the plate is usually placed above the front passenger door inside the vehicle.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.