Can You Still Drive After the Car Overheats?

1 Answers
KhloeRose
07/24/25 6:24am
When the engine temperature is too high, you must stop the car immediately for inspection and must not continue driving. Otherwise, it can easily damage the engine, even requiring major repairs. To determine if the car is overheating, check three things: 1. The temperature gauge. 2. The temperature warning light. 3. Whether there is steam coming out. The temperature warning light should be given special attention because it is more noticeable and easier to see—it will light up first before the car overheats. Common reasons for overheating include: 1. Insufficient coolant. This should be checked first and is basically the only thing you can inspect yourself. If you are on the highway or in a remote area without coolant, you can temporarily use water as a substitute. 2. A dirty radiator. The radiator has many pores formed by cooling fins, which can easily accumulate debris, sludge, and other deposits, reducing airflow and cooling efficiency.
Was this review help?
13
2
Share
More Forum Discussions

Is it necessary to display the insurance decal on the vehicle?

It is mandatory to display the insurance decal on the vehicle. Below are specific details about the insurance decal: Placement location: After purchasing compulsory insurance for the vehicle, the insurance decal must be immediately affixed to the right side of the front windshield. Penalty mechanism: If a motor vehicle driven on the road does not display the insurance decal, the traffic management department of the public security organ shall detain the vehicle and notify the owner to provide the insurance decal or complete the relevant procedures. A warning or fine may be imposed. Handling lost decals: If the vehicle's insurance decal is lost, the owner needs to visit the insurance company to apply for a replacement. Bring the vehicle's registration certificate and compulsory insurance policy. After obtaining the replacement, affix it directly to the right side of the windshield.
10
3
Share

What are the consequences of not licensing a vehicle?

It may result in the vehicle being impounded by the traffic management department of the public security authorities, with a warning or fine imposed. Below are precautions for licensing a new vehicle: 1. Although imported vehicles and some domestic cars, small and mini passenger vehicles have been included in the exemption from inspection, the range of exempt domestic car models is relatively limited. After the implementation of the new policy, all domestic cars can be exempt from inspection. The exemption applies to cars and small, mini passenger vehicles and two-wheeled motorcycles marked with "new vehicle exempt from inspection." 2. Exempt models do not include: off-road vehicles, small and mini ordinary passenger vehicles, and heavy or medium-sized trucks. 3. Exemption from inspection does not mean direct licensing. Currently, it only eliminates some inspection items. Before licensing, new vehicles must still undergo appearance inspection, photographing, and number stamping at the inspection site. Additionally, exhaust emission tests required for environmental protection purposes must still be conducted.
18
1
Share

What is the method to reset the MINI brake pad warning light?

MINI brake pad warning light reset method is: 1. Insert the remote key without pressing the brake pedal; 2. Press the start/stop engine button once to illuminate all dashboard lights; 3. Hold the reset button on the upper left of the dashboard for approximately 8 seconds. The brake pad replacement procedure is: 1. Open the engine compartment to check brake fluid level height to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the brake caliper bolts and take out the old brake pads; 4. Install new brake pads and tighten the guide bolts to complete replacement. Types of brake pads include: semi-metallic brake pads, non-asbestos organic (NAO) brake pads, carbon fiber brake pads, and ceramic fiber brake pads. The working principle of brake pads is: utilizing friction between the brake pads and brake drum, as well as between tires and road surface, to convert the vehicle's kinetic energy into thermal energy through friction, thereby stopping the vehicle.
10
4
Share

What is the difference between 28t and 2.0t?

There is no difference between 28t and 2.0t. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning and expanding the gas in a sealed cylinder to push the piston to do work. Engine maintenance methods: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the scale in the water tank; 4. Regularly remove carbon deposits from the car; 5. Replace the car's air filter, oil filter, and fuel filter on time. Engine types include: 1. According to the fuel used, they are divided into gasoline engines and diesel engines; 2. According to the stroke, they are divided into four-stroke internal combustion engines and two-stroke internal combustion engines; 3. According to the cooling method, they are divided into water-cooled engines and air-cooled engines; 4. According to the cylinder, they are divided into single-cylinder engines and double-cylinder engines; 5. According to the intake system, they are divided into naturally aspirated engines, turbocharged engines, and supercharged engines.
2
2
Share

What Causes the Sour Smell When Turning on the Air Conditioning in a BMW?

The sour smell when turning on the air conditioning in a BMW is caused by a dirty air conditioning filter that has been used for too long. The functions of the air conditioning system are: 1. To cool, heat, ventilate, and purify the air inside the car; 2. To provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety. Taking the 2021 BMW 5 Series as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, fuel tank capacity 68l, and curb weight 1705kg. The 2021 BMW 5 Series features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 184ps, maximum power of 135kw, maximum torque of 290nm, paired with an 8-speed automatic transmission.
12
4
Share

How to Distinguish Between Land Cruiser and Prado?

The differences between Land Cruiser and Prado are as follows: 1. Different Performance: The Land Cruiser has stronger off-road performance than the Prado, with better adaptability, a more stable chassis, and more comfortable seating. 2. Different Appearance: The Land Cruiser is larger than the Prado, giving it a more commanding presence. The Prado's front grille is vertical, while the Land Cruiser's is horizontal. The rear tailgate opening mechanism also differs. 3. Different Displacement: The current Prado comes in two displacement versions: one with a 2.7L engine and another with a 4.0L engine. The Land Cruiser also has two displacement versions: a 4.6L (imported version) and a 4.0L (domestically produced version). 4. Different Comfort Levels: The Land Cruiser's larger size provides more spaciousness and comfort compared to the Prado.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.