Can you park in a parking space with a yellow line on the curb?

1 Answers
LaKate
07/30/25 9:32am
Parking is not allowed on curbs with yellow lines. Below are specific details about roadside parking: Scenarios where parking is prohibited: Parking in a yellow line zone is considered illegal parking. Violating traffic parking bans will result in a 3-point penalty. Parking is prohibited in areas with no-parking signs or markings, sections with barriers separating motor vehicle lanes from non-motorized vehicle lanes or sidewalks, pedestrian crosswalks, and construction zones. Additionally, parking is not allowed at intersections, railway crossings, sharp curves, roads narrower than 4 meters, bridges, steep slopes, tunnels, or within 50 meters of these locations. Scenarios where long-term parking is prohibited: If the curb has alternating black and yellow lines, this indicates that long-term parking is not allowed in this area, but short-term parking (with the driver remaining in the vehicle) is permitted.
Was this review help?
14
4
Share
More Forum Discussions

What is the actual measured fuel consumption of the 10th-generation Civic 1.5T?

The fuel consumption range of the 10th-generation Civic 1.5T is 5.91~7.77 liters per 100 kilometers, with an average fuel consumption of 6.84 liters per 100 kilometers. The CVT version of the 10th-generation Civic has a fuel consumption range of 6.42~8.56 liters per 100 kilometers, with an average fuel consumption of 7.49 liters per 100 kilometers. Relevant information about the Civic is as follows: 1. In terms of power, the new Civic is equipped with a 1.5T turbocharged engine and a 1.0T turbocharged engine, paired with a 6-speed manual transmission or a CVT. 2. It is worth noting that the engine tuning parameters vary depending on the transmission (the manual version has slightly higher torque). The 1.5T engine of the Civic has a maximum power of 130 kW at 6000 rpm and a peak torque of 220 N·m at 1700-5500 rpm. The actual measured 0-100 km/h acceleration time for the 10th-generation Civic 1.5T is 7.09 seconds.
2
0
Share

Should You Release the Handbrake or Shift Gears First in an Automatic Car?

For an automatic car, you should shift gears first and then release the handbrake. Here is some relevant information: 1. Pay attention to the starting sequence. What's more important for an automatic car is the parking sequence, because the automatic transmission is in P (Park) gear, where the transmission gears are locked. When parking on a slope, the correct procedure is to brake first, then pull the handbrake, and only shift into P gear after the car has completely stopped. 2. If you shift into P gear first and then brake, the car might roll back slightly due to the slope. Since P gear locks the transmission, this slight backward movement could potentially damage the transmission. 3. The same principle applies when parking in a parking space with wheel stops behind the tires. If you release the brake, the car might lurch forward slightly due to elasticity. It's best to tighten the handbrake first before shifting into P gear.
14
1
Share

How to activate the one-touch window lift function with the key for the 2021 CR-V?

2021 CR-V key one-touch window lift activation method is: 1. Press and hold the lock button for more than 3 seconds, all windows will rise until closed. 2. Simply press and hold the unlock button on the key for about 3 seconds, and all four window glasses will synchronously lower. Features of the 2021 CR-V model: 1. Exterior: The 2021 Honda CR-V features a more refined front grille, with the middle grille adorned with delicate chrome trim. The headlights are larger in design, and the LED daytime running lights are highly recognizable. The lower air intake adopts a trapezoidal design, with elongated front fog lights on both sides. 2. Body dimensions: The length, width, and height of the body are 1855mm, 1689mm, and 2660mm respectively. 3. Powertrain: The 2021 Honda CR-V is equipped with a 1.5T inline four-cylinder engine.
11
4
Share

What is the actual fuel consumption of the Mercedes-Benz E260?

There are a total of 8 available models of the Mercedes-Benz E260, including the Mercedes-Benz E-Class - 2022 Model - Facelift - E260L Sport, Facelift - E260L, Facelift - E260L Sport - 4MATIC, Facelift - E260L 4MATIC, E260L Sport, E260L, E260L Sport - 4MATIC, and E260L 4MATIC. These models are equipped with a 197-horsepower engine, and their NEDC fuel consumption is 9.69L per 100 kilometers. The fuel tank capacity is the same for all E260 models. The distance that can be covered with a full tank of fuel is as follows: For models equipped with the 197-horsepower engine, the fuel tank capacity is 66L, and the distance that can be covered with a full tank is 66/9.69*100=681km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a traffic light can increase fuel consumption.
6
0
Share

What is the fuel consumption of the Hummer H2?

The fuel consumption of the Hummer H2 is approximately 25 to 30 liters per 100 kilometers. When driving in congested urban roads, the fuel consumption can reach around 30 liters per 100 kilometers. Below is additional information about the Hummer H2: 1. The Hummer H2 is a heavyweight hardcore off-road vehicle. It is equipped with two engines: a 6.2-liter V8 naturally aspirated engine and a 6.0-liter V8 naturally aspirated engine. 2. The 6.2-liter naturally aspirated engine delivers 398 horsepower and a maximum torque of 574 Nm. This engine reaches its maximum power at 5700 rpm and its maximum torque at 4300 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. This engine is paired with a 6-speed automatic transmission. 3. The 6.0-liter naturally aspirated engine also produces 398 horsepower and a maximum torque of 574 Nm. It achieves its maximum power at 5700 rpm and maximum torque at 4300 rpm. This engine also employs multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is matched with a 4-speed automatic transmission.
3
4
Share

How to adjust the headlights of BYD F3?

BYD F3 lever-type headlight adjustment is as follows: 1. First prepare a flashlight (the adjustment point for F3 is in the engine compartment, which is hard to locate), a tape measure, and a screwdriver. 2. The center height of the light's hotspot, which is the height to be adjusted = the height of the headlight from the ground × 0.95. For the F3, the headlight is about 70 cm from the ground, so the calculated adjustment height is 66.5 cm. This height ensures the light lands at about 100 meters on the road, providing the best illumination. 3. Drive the car to a distance of about 5 meters from a wall, draw a horizontal line at 66.5 cm on the wall, and then start adjusting. 4. The two outer adjustment points control the left-right position of the light, while the two middle ones adjust the up-down position. If the right headlight is slightly tilted towards the center, turn the adjustment gear on the right headlight counterclockwise. It's best to mark a reference point on the wall. 5. After adjusting the left-right position, proceed to adjust the height of the light. Turn the gear near the center position counterclockwise to lower the light gradually, or turn it clockwise to raise it. The up-down adjustment is relatively simple. 6. Use the height of the other headlight as a reference to clearly see the adjustment of the light's height. Adjust the center of both headlights' hotspots to the horizontal line on the wall to complete the adjustment.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.