···
Log in / Register

Can you cross a combination of one dashed line and one solid line?

4 Answers
McElisa
07/29/25 11:05pm

A combination of one dashed line and one solid line can be crossed. Here are some methods to prevent crossing solid lines: 1. Avoid changing lanes arbitrarily or crossing over before traffic light intersections: If you haven't changed back to the original lane in time, don't cross the line to return. Instead, find an intersection to make a U-turn. 2. Change lanes only when it's a dashed line: While driving, pay attention to the road markings. When turning, observe the directional signs on the ground to ensure neither the left nor right wheels cross the line when entering the turning lane. When encountering a combination of dashed and solid lines, check whether your direction of travel is on the dashed side.

Was this review help?
1
5
Share
SanHarmony
08/16/25 1:05am

When I see a lane marking with one dashed line and one solid line on the road, I know that the lane on the dashed line side allows me to cross, such as for overtaking or changing lanes, but the solid line side must never be crossed. This design is intended to enhance safety, preventing accidents in curves or blind spots. If I'm on the side with the dashed line, I can cautiously proceed when visibility is good; but if it's the solid line side, no matter how urgent, don't act impulsively. Most countries' traffic laws clearly stipulate that violating this rule may result in a ticket or even an accident, so developing good habits is crucial. After years of driving, I've found that adhering to this rule saves a lot of trouble—don't risk big losses for small gains.

Was this review help?
18
5
Share
Expand All
SimonRose
10/18/25 6:44am

I pay special attention to this combination of solid and dashed lines while driving. The side with the solid line must never be crossed, as it can easily lead to a collision with oncoming traffic, especially on narrow roads or high-speed curves. Although the dashed side is permissible, you must ensure there are no obstacles or oncoming vehicles ahead, otherwise the risk is high. For safety, slow down and observe before deciding whether to proceed. I've seen too many accidents caused by reckless crossing of solid lines by inexperienced drivers, resulting in heavy losses. Remember, vehicle conditions like brakes and tires should also be checked to ensure you can react in time during emergencies. Developing defensive driving habits can ensure safety.

Was this review help?
14
4
Share
Expand All
CamilaAnn
12/01/25 7:22am

Crossing the solid line is a traffic violation, which can be captured by cameras and result in fines or even penalty points. I often see violators getting caught in urban areas, so even if the dotted side allows movement, proceed with caution. Strictly adhere to road markings, otherwise you risk harming yourself and others. Fines are minor compared to the importance of safety.

Was this review help?
20
2
Share
Expand All
More Forum Discussions

Where can I order the Honda Forza 350?

You can order the Honda Forza 350 at auto shows. Here is some extended information about Honda's features: Most durable engine: It has firmly established its position, making it the undisputed number one, with an excellent reputation in both sedan and SUV segments. Highest power engine: The 1.6L Civic Red Top engine still holds the record for the highest power output in its displacement class, and even many larger displacement engines can barely surpass it. Hence, Honda also has the nickname 'King of Naturally Aspirated Engines.' Chassis: In terms of chassis, Honda's energy-absorbing design is quite good, including humanized designs like pedestrian protection.
4
4
Share

How Often Should Honda Full Synthetic Oil Be Changed?

Honda full synthetic oil should be changed every 5,000 kilometers. Below is relevant information about engine oil: Mineral oil: Mineral oil is the remaining oil after gasoline and heavy oil are extracted from petroleum. In fact, mineral oil is also a natural oil, but it contains more impurities. Compared to semi-synthetic and full synthetic oils, it is cheaper, provides poorer lubrication for the engine, and has a shorter service life. Semi-synthetic oil: Semi-synthetic oil falls between mineral oil and full synthetic oil. It contains a large amount of anti-corrosion additives to enhance the oil's stability and high oxidation resistance. Full synthetic oil: Among these three types of oil, full synthetic oil offers the best quality and durability, and it is also the most expensive. Generally, it can be used for 10,000 to 12,000 kilometers in passenger cars without deteriorating.
17
3
Share

What does the 'Engine Fault Please Repair' message mean for the Peugeot 3008?

Peugeot 3008 engine fault 'Please Repair' indicates a sensor malfunction. Below is relevant information about Peugeot: Brand Establishment: 1896. The meaning of the 'Peugeot' lion emblem: The 'Peugeot' lion is exceptionally distinctive and tasteful. Its simple, crisp, and bold lines symbolize a more perfect and mature Peugeot automobile. The unique design emphasizes both strength and rhythm, embodying a contemporary spirit. Throughout history, the lion's majesty, bravery, and imposing presence have been regarded as noble and heroic. The ancient Egyptian colossal sculpture 'Sphinx,' with its human head and lion body, represents the pharaoh's dignity and valor. Therefore, Peugeot takes pride in using the 'lion' as its emblem.
20
3
Share

What is the real reputation of Honda Civic?

Honda Civic has a fairly good real reputation. Below is a partial introduction about the 10th-generation Civic dashboard: Introduction: When the light displays green, it indicates a more economical driving mode. When the light shows light green, it is the normal driving mode, and when it turns white, it reminds the driver that rapid acceleration will lead to increased fuel consumption. The red dashboard is exclusive to the Civic Type-R and is not equipped on the standard Civic. Exterior: Full of youthful vitality, the dynamic short-tail fastback design attracts many young people. The 10th-generation Civic is equipped with a new 1.5T engine, model L15B8, with a maximum power of 130kW and a maximum torque of 220Nm. The 0-100km/h acceleration test for the Civic can be completed in as fast as 7.09 seconds. How to set: The driver information interface displays the odometer, trip meter, outside temperature indicator, and other gauges. It also shows important information such as warnings and other helpful messages.
2
0
Share

BYD F6 Tire Model Specifications?

The tire model for BYD F6 is 205/65R15. The first number 205 indicates the tire width is 205MM, 65 represents the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 15 denotes the rim diameter is 15 inches. The middle letters or symbols have special meanings: "X" stands for high-pressure tire; "R" and "Z" indicate radial tires; "-" represents low-pressure tires. The BYD F6 has a maximum speed of 175km/h and a fuel consumption of 8.2L per 100km. In addition to the model, the following common data are also marked on the tire: Tire cord material: Represented by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
9
1
Share

What are the reasons for the transmission failure warning in the Focus?

Here are the specific explanations regarding the causes of transmission failure in the Focus: Contamination inside the transmission: The automatic transmission failure is not caused by damage to the internal valve body, but by stubborn dirt and impurities inside, especially when these contaminants accumulate in the valve body, forming blockages that prevent effective regulation of oil pressure, leading to issues like jerking, impact, and slippage. High temperature damaging the transmission: High temperatures can degrade the quality and frictional characteristics of the automatic transmission fluid, increasing friction and wear. At the same time, sludge builds up inside the transmission, causing jerking and impact. If the temperature exceeds 120°C, rubber sealing materials begin to harden, eventually leading to leaks and reduced hydraulic pressure. If the temperature rises even higher, the transmission starts to slip, and this slippage further increases the temperature.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.