Can You Continue Driving When the SVS Light Is On?

1 Answers
AnnaFitz
07/29/25 7:49pm
SVS light is on can continue to drive. 1. The SVS indicator is the engine fault indicator light. When the vehicle's ignition key is turned on, this light will illuminate and will go off after the vehicle starts. If the engine ECU detects a fault, the SVS light will turn on. If this light comes on while driving, it indicates that there is a problem with the vehicle's engine. 2. The SVS fault indicator light is a warning light that comes on when the ECU or TCU of an electronically fuel-injected car detects a problem with the engine or automatic transmission. 3. All electronically fuel-injected cars have an SVS fault indicator light. For manual transmissions, it indicates an engine fault, while for automatic transmissions, it indicates faults in both the engine and the automatic transmission.
Was this review help?
2
3
Share
More Forum Discussions

Why does the engine get extremely hot after driving for a while?

The reasons why the engine gets extremely hot after driving for a while: 1. Severe lack of coolant. If the owner does not check and add coolant in time, it can easily cause the engine to overheat. It is recommended that users check the coolant; 2. Water pump failure. After the water pump fails, the water that conducts heat from the engine cannot circulate and renew in time. After the engine runs for a while, the water temperature will rise rapidly, and the water temperature warning light on the dashboard will also turn on; 3. Cooling fan failure. If the cooling fan is damaged or the wiring is short-circuited, causing the fan to not work or the cooling fan to rotate slowly, the engine's heat cannot be dissipated, leading to an increase in engine temperature. Naturally, you will feel a significant amount of heat when opening the engine compartment.
20
4
Share

Can You Drive on the Highway in the Rain?

Driving on the highway in the rain is allowed. Speed limits will be temporarily adjusted via LED signs, with the basic limit set below 80 km/h. However, the enforcement standards for speeding violations via surveillance cameras remain unchanged. Therefore, even in rainy conditions, driving at normal speeds will not be recorded as a violation. Precautions for highway driving in the rain: 1. When there is standing water on the road, high-speed driving can create a layer of water film between the tires and the road surface, significantly reducing tire grip and greatly increasing braking distance. 2. During rainy highway driving, avoid making sharp steering maneuvers, as reduced tire grip makes the vehicle more prone to skidding. Even with an ESP (Electronic Stability Program) system, extra caution is still necessary.
3
0
Share

Does the S Gear Still Require Manual Gear Shifting?

S Gear does not require manual gear shifting. The S Gear mode is a sport mode, also known as the overtaking gear mode, where manual upshifting or downshifting is unnecessary. The transmission will automatically upshift as the engine speed increases. In this mode, the transmission is tuned for high RPM and low gear, making it suitable for overtaking and uphill driving. Under S Gear sport mode, the transmission can shift freely, but the shifting timing is delayed to keep the engine at high RPM for a longer duration, thereby delivering greater torque output and acceleration. Precautions for using S Gear: 1. Since S Gear only delays upshifting without altering other operational aspects, it inevitably increases the transmission load in the short term, leading to higher temperatures and accelerated wear. Therefore, avoid prolonged use of S Gear. 2. For vehicles frequently driven in congested urban areas, engine carbon buildup tends to be more severe. Periodically using S Gear appropriately helps remove carbon deposits from the engine, improving fuel economy and extending engine lifespan.
3
1
Share

Is Baojun's machinery a joint venture?

Baojun is a joint venture car. The following is a related introduction about Baojun: 1. Baojun is an independent automobile brand created by SAIC-GM-Wuling in 2010. SAIC-GM-Wuling officially released the new passenger car brand "Baojun Automobile", marking the formal entry of this Chinese microcar leader into the booming sedan market. The origin of the Baojun brand: The original meaning of "Jun" is a fine horse, and Baojun is people's most beloved fine horse. 2. The Baojun 730 is a home-use MPV product under the Baojun brand of SAIC-GM-Wuling. The car was officially launched in the second half of 2014. The overall design of the Baojun 730 adopts a style similar to that of the Baojun 630. The car adopts a seven-seat layout, with a maximum cargo space of 1680L.
9
3
Share

Where is Zongshen's place of origin?

Zongshen's two-wheel motorcycle factory is located in Chongqing. There is also a joint venture Zongshen Piaggio in Foshan, Guangdong, and another Zongshen three-wheel motorcycle factory in Xuzhou, Jiangsu, etc. Zongshen: Zongshen Industrial Group was founded in 1992 by founder Zuo Zongshen. It is a large private high-tech industrial, commercial and trade group integrating research, development, manufacturing and sales, with 30 wholly-owned and holding subsidiaries including the listed company Zongshen Power. Zongshen's business scope: First is the manufacturing sector, including motorcycle engines, general power machinery, mini vehicle engines, marine engines, small aviation power, motorcycles, electric vehicles, and key motorcycle components. It has an annual production capacity of 2 million motorcycles, 4 million motorcycle engines, 100,000 mini vehicle engines, and 5 million general machinery products.
19
2
Share

What is the sequence for parking and turning off the engine in Subject 3?

The sequence for parking and turning off the engine in Subject 3 is as follows: When the examinee hears the instruction to pull over, they should turn on the right turn signal, observe the right lane, and pull over after confirming it is safe. After the vehicle comes to a complete stop, shift to neutral, engage the handbrake, release the clutch and brake pedals, reset the lights, turn the key to the OFF position, remove the seatbelt, check for pedestrians behind using the rearview mirror, and then open the door to exit the vehicle. The test content for Subject 3 includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning at intersections, meeting oncoming vehicles, overtaking, making U-turns, and night driving.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.