Can Vehicle Management Offices Issue License Plates on Sundays?

2 Answers
Carrie
07/24/25 11:01am
Vehicle Management Offices are closed on weekends and statutory holidays, and license plates cannot be issued during these periods. License Plate Issuance Hours: As Vehicle Management Offices are government departments, their working hours are generally fixed. The standard working hours are from Monday to Friday, 8:30 AM to 12:00 PM in the morning, and 2:00 PM to 5:30 PM in the afternoon. These are also the designated hours for license plate issuance, and plates can only be issued during these time slots. Required Documents for License Plate Issuance: Original and photocopy of ID card (if applying through an agent, both the agent's and the vehicle owner's IDs are required); original and photocopy of the invoice; original and photocopy of the vehicle qualification certificate; original and photocopy of the compulsory insurance policy; tax payment certificate.
Was this review help?
19
2
Share
DiNora
08/11/25 6:01am
I remember the operating hours of the vehicle management office. Generally, they are closed on Sundays because they are government agencies, just like most government departments, which are open on weekdays from Monday to Friday and closed on Saturdays and Sundays. If you need to register your vehicle, you should check the specific schedule in your local area in advance, as it may vary slightly between cities. When I last registered my vehicle, I chose a Monday and arrived early to avoid queues, and it went smoothly. If you're in a hurry, you can check the operating hours on the official website or app, or call the hotline to inquire. It's not very practical to handle car-related matters on weekends; weekdays are more efficient, and you can also get your vehicle inspected while you're there. In short, don't make a wasted trip on Sunday—plan your time wisely to avoid hassle.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What is the normal amount of under-exhaust in a diesel engine?

Cylinder pressure can exceed 20. Underground exhaust (crankcase exhaust gas) in diesel engines is one of the common faults, and there are many reasons for excessive crankcase exhaust gas pressure in diesel engines. Severe wear of engine piston rings or cylinder liners can cause poor sealing between the piston and cylinder liner. Here is additional information: Precautions: When installing the exhaust pipeline, it is advisable to choose a pipeline with a larger diameter, avoid using 90° right-angle elbows, and ensure no more than four elbows are used to prevent exhaust blockage, which could lead to a decrease in diesel engine power.
4
1
Share

Is it safe to drive in a level 6 gale?

It is possible to drive in a level 6 gale. However, driving in windy conditions can reduce vehicle stability due to the force of the wind, and flying dust can obstruct visibility, affecting the driver's normal observation and judgment. This can lead to an increased braking distance and a larger non-safe braking zone. If the wind is too strong, it may also cause the vehicle to skid or roll over. We remind all drivers to exercise caution when driving in windy weather and prioritize safety. Here are some driving precautions: 1. Check the rearview mirrors: Always use turn signals and slow down when turning or changing lanes. Before turning, be sure to check the rearview mirrors; left turns mainly require checking the left mirror, right turns mainly the right mirror, and both left and right turns require checking the interior rearview mirror. 2. Don't focus solely on the front of the car: When driving on a clear road, look straight ahead about 100 meters and avoid staring at the immediate front of the car. 3. Depress the clutch: Generally, when decelerating at speeds above 40 km/h, there's no need to depress the clutch first; wait until the speed drops to around 20 km/h before depressing the clutch. 4. Steering: Turn the steering wheel slowly at high speeds and quickly at low speeds.
10
1
Share

What is the maintenance interval for the GW250?

GW250 maintenance involves taking the vehicle to a service center for oil changes based on mileage and time. Generally, the oil should be changed every 5,000 kilometers or every six months. The air filter and oil filter need to be replaced every 10,000 kilometers. Relevant information about vehicle maintenance is as follows: 1. Introduction: Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. Maintenance scope: Modern vehicle maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
12
1
Share

Can the Start-Stop Function of the New Santana Be Permanently Disabled?

The start-stop function of the new Santana can be permanently disabled. Below is a detailed introduction about the Santana car: 1. Overview: The Volkswagen Santana (SANTANA) is a sedan brand produced by Volkswagen in California, USA, and the standard Santana sedan can be seen nationwide. Currently, there are models such as the Santana, Santana 2000, and Santana 3000. 2. Other Specifications: The wheelbase is 2548mm. The vehicle dimensions are 4546mm*1710mm*1427mm. The trunk capacity is 442L. The fuel consumption is 8.5L/100km. The engine type is a 1.8L 95HP L4. The standard seating capacity is 5. The top speed is 165km/h. The acceleration time is 12.9 seconds. The drive type is front-wheel drive.
8
3
Share

What does the flashing red key indicator light on the Nissan Sylphy mean?

The red key symbol displayed on the Nissan Sylphy's dashboard alerts the driver that the remote key's battery is low and needs to be replaced. The steps to replace the key's battery are as follows: 1. Press the mechanical key unlock button on the remote. 2. Remove the mechanical key from the remote. 3. Use a tool to pry open the seam around the edge of the remote. 4. Separate the upper and lower shells of the remote. 5. Replace the internal button battery, ensuring the battery model is the same. 6. Reassemble the shells in the reverse order. 7. Reinsert the mechanical key.
19
1
Share

Why does the tachometer not move when stepping on the accelerator?

The reasons why the tachometer does not move when stepping on the accelerator include a broken tachometer or foreign objects stuck inside preventing movement. Below is expanded information on the functions of the tachometer: 1. Observing whether the car is started: When the car is not running, it will be in an idle state. At this time, the tachometer needle does not point at 0, but at a position above 700 RPM. Therefore, at any time, if you are unsure whether the vehicle has started, you only need to check the tachometer. 2. Determining the shift timing: Generally, gear shifting is based on the engine sound, but with the increasing sound insulation of vehicles, the engine sound is almost inaudible. The most accurate method to determine is based on the engine RPM.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.