···
Log in / Register

Can the Vehicle Management Office Process License Renewals During National Day?

3 Answers
LaMackenzie
07/29/25 7:08am
The Vehicle Management Office cannot process license renewals during National Day, as it is a government institution and therefore closed on statutory holidays. The operating hours of the Vehicle Management Office are from 8:30 AM to 6:00 PM, Monday to Friday, and from 9:00 AM to 4:00 PM on Saturdays and Sundays. The Vehicle Management Office is a direct agency under the public security system, primarily responsible for handling motor vehicle registration, modifications, transfers, mortgages, and deregistration. It is generally available only in county-level or higher administrative regions. Responsibilities of the motor vehicle registration review position at the Vehicle Management Office include: 1. Verifying whether the documents provided by the applicant are complete, authentic, and valid; 2. Confirming the vehicle model and checking relevant technical parameters; 3. Inspecting the engine number and vehicle identification number of the motor vehicle to confirm any signs of tampering and comparing them with the national database of stolen vehicles; 4. Conducting an exterior inspection of the motor vehicle to confirm the body color.
Was this review help?
5
1
Share
OBeau
08/12/25 11:43pm
I remember during the National Day holiday two years ago, I was in a hurry to renew my driver's license. I thought there might be fewer people and shorter queues during the holiday, so I drove to the vehicle management office, only to find the gate shut tight with a notice posted saying that regular services were suspended during the statutory National Day holiday. That was a profound lesson because, during long holidays, the vehicle management office, as a government institution, is usually closed or only handles emergencies. Regular services like license renewal are mostly unavailable. I advise everyone not to choose the Golden Week for license-related procedures—not only is it a wasted trip, but it could also delay your vehicle use. If your license is about to expire, it's best to make an online appointment or go directly to the office one or two weeks in advance to save time and effort. Normally, the vehicle management system has an official WeChat account where you can check holiday schedules, so remember to avoid holidays. Drive safely and don't risk driving without a valid license. From then on, I always check the expiration date in advance to avoid last-minute chaos and disruptions to my travel plans.
Was this review help?
7
5
Share
Expand All
Eileen
10/04/25 5:37am
As a young driver, I know that vehicle management offices are often closed during holidays, especially long ones like National Day. Last year, I also thought it would be convenient to renew my license during the holiday, but when I checked the official website for the holiday notice, sure enough, the office was closed for the entire holiday, and license renewal services were suspended. Nowadays, many cities have apps or mini-programs where you can check the working hours of vehicle management offices. I suggest you download one in advance to avoid wasting your holiday time. Actually, renewing your license isn’t an urgent matter, but if it’s about to expire, make sure to go after the holiday and don’t delay until it’s expired and you get fined. While driving during the holiday, check the status of your documents—safety comes first. Enjoy your long holiday with more rest and less hassle over paperwork.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Which country currently manufactures Land Rover vehicles?

Land Rover is a British SUV manufacturer, with most of its models produced in the UK. However, some Land Rover models are also manufactured domestically in China. The Land Rover Group is the largest automobile manufacturer in the UK. Current Land Rover models include: Range Rover Sport (classified as a mid-to-large-size SUV) - a large luxury vehicle; Range Rover (mid-to-large-size SUV); Range Rover Velar (mid-size SUV); Range Rover Evoque (compact SUV); Defender (mid-size SUV). The Land Rover Defender is a mid-to-large-size SUV. The dimensions of the Range Rover are: length 4950mm, width 2191mm, height 1863mm, with a wheelbase of 2880mm. The front track is 1629mm and rear track is 1626mm. The Range Rover seats 5 passengers and has 5 doors. It is equipped with two engine options: a 5.0L supercharged engine producing maximum power of 375kW and torque of 625Nm, and a 5.0L naturally aspirated engine with maximum power of 276kW and torque of 510Nm.
10
3
Share

What Causes the Car Lights to Keep Flashing?

The reasons for car lights continuously flashing are: 1. The hazard light switch is turned on; 2. Partial circuit failure connected to the vehicle's computer, bulb or ignition coil failure, stabilizer malfunction; 3. Poor wiring contact causing a short circuit, resulting in continuous light flashing; 4. The vehicle computer activates the recognition system for the anti-theft chip; 5. Insufficient battery power alerts the owner through flashing lights when the battery is low; 6. Brake system failure causing the tail lights to flash continuously; 7. The steering wheel is locked when parked, and the car activates the anti-theft function. Car lights are primarily used for daily, nighttime, and poor visibility conditions to provide illumination and warn other vehicles, ensuring driving safety.
14
4
Share

What Causes Excessive Tire Pressure?

The reasons for excessive tire pressure are: 1. Over-inflation of tires leading to high pressure; 2. Hot weather causing gas expansion and increased pressure; 3. Prolonged driving generating friction heat, resulting in higher pressure; 4. Aging and wear of suspension components related to wheels causing misalignment, uneven wear, increased temperature, and higher tire pressure. Effects of excessive tire pressure: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Steering wheel vibration and deviation, decreasing driving comfort; 3. Accelerated wear of central tread patterns, shortening tire lifespan; 4. Increased vehicle vibration, indirectly affecting other components' longevity; 5. Excessive stretching deformation of tire cords, reduced elasticity, and increased load during driving; 6. Decreased resistance to punctures.
8
4
Share

How to Remove the Side Mirror of the New X-Trail?

The steps to remove the side mirror of the new X-Trail are: 1. Press down the head of the mirror to tilt the tail upward, then grasp the tail and pull outward to remove the mirror; 2. After removing the mirror, unplug the wire connector of the mirror heating element, and manually connect the metal buckle on one end of the heating wire; 3. Connect the metal buckle to the slot on the top of the black plastic holder on the back of the mirror, then place the wired mirror back into the mirror housing, adjust its position, and press it firmly; 4. Unscrew the screw at the bottom of the mirror and the screw beneath the middle component of the mirror; 5. Remove the hidden screw and take off the middle component to complete the entire disassembly process.
5
1
Share

How to Turn Off the Auto Start-Stop Function on the Qashqai?

The method to turn off the auto start-stop function on the Qashqai is: 1. Start the vehicle's power; 2. Locate the engine start-stop control button; 3. Press the button marked with an 'A' to deactivate the engine start-stop function. Taking the Qashqai 2021 2.0L CVT Smart Edition as an example, its body dimensions are: length 4401mm, width 4401mm, height 1593mm, with a wheelbase of 2646mm and a fuel tank capacity of 57 liters. The Qashqai 2021 2.0L CVT Smart Edition is equipped with a 2.0L 151 horsepower L4 engine, delivering a maximum horsepower of 151hp, a maximum power of 111kW, and a maximum torque of 194Nm.
15
3
Share

What is the reason for jerky acceleration and inability to increase fuel during cold start?

The reasons for jerky acceleration and inability to increase fuel during cold start are: 1. Excessive carbon buildup on the throttle valve and air flow meter, which can cause jerky acceleration and inability to increase fuel when pressing the accelerator; 2. Too much carbon deposit in the combustion chamber of the cylinder. The combustion chamber has a certain adsorption effect on gasoline, and excessive carbon deposits prevent normal adsorption of gasoline, thus prolonging the ignition start time; 3. Lean mixture causing insufficient gas thrust on the piston after ignition, prolonging combustion time and leading to engine overheating; 4. Intermittent operation of the engine due to high and low voltage component and circuit faults in the ignition system, resulting in discontinuous high-voltage sparking and causing weak acceleration.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.