Can the vehicle body cross the line during curve driving?

1 Answers
VanSophie
07/30/25 12:58am
Curve driving does not allow the vehicle body to cross the line. Introduction to curve driving: It is an assessment point in Subject 2 of the driver's test, commonly known as the S-curve. The test requires the vehicle to drive on an S-shaped road with a specified width without pressing the edge lines, and the steering should be used smoothly. The assessment evaluates the driver's ability to manipulate the steering and control the vehicle during curve driving. The purpose is to develop the driver's skills in steering application and mastering the wheel trajectory. Precautions: When entering the curve, slow down in advance and keep to the right; do not turn the steering wheel too quickly or sharply; try to choose a route with a large turning radius; avoid using the brake, especially emergency braking; check the rearview mirror—it's essential to learn how to use it—and master the clutch control by using the half-clutch engagement.
Was this review help?
7
4
Share
More Forum Discussions

How to Drive in Variable Lanes Without Violating Traffic Rules?

Methods to drive in variable lanes without violating traffic rules: 1. Check the traffic signal in advance and only enter the variable lane when the light turns green; 2. Do not cross the lane markings or overtake in the variable lane, as this may be captured by electronic surveillance; 3. Follow the indicated direction of the variable lane and do not change direction; 4. Pay attention to the permitted driving time, otherwise it will be considered a violation. Variable lanes are those with multiple diagonal lines inside the lane, resembling a lying "non" character, and can change direction based on traffic flow at any time. Variable lanes are mainly designed for sections with concentrated traffic during peak hours, insufficient lanes, or significant differences in traffic flow between morning and evening peak hours. When encountering such lanes, simply follow the direction indicated by the variable lane.
15
4
Share

Can a New Car with Paint Damage Be Licensed?

If the paint damage on a new car is not obvious, it can be licensed normally. However, if the scratches are very noticeable and affect the car's appearance, the damaged area needs to be repainted before the car can be licensed at the vehicle management office. Documents required for licensing: ID card, vehicle certificate of conformity, vehicle parameter sheet, car invoice (second and fourth copies), vehicle purchase tax, car insurance policy, purchase invoice, vehicle certificate of conformity, ID card or organization code certificate and photocopy of the invoice issuer, compulsory insurance policy, tax payment certificate, and temporary residence permit for non-locals. Licensing process: After preparing the materials, go to the vehicle management office to submit the documents, sign as the owner, have the vehicle inspected and confirmed by traffic police, choose the license plate number, receive the receipt, install the license plate, and collect the vehicle license and registration certificate.
9
3
Share

What kind of engine oil is used for the 1.5t Mondeo?

1.5t Mondeo uses 0w40 engine oil. The functions of engine oil include: lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Taking the 2020 1.5t Mondeo as an example, it is a mid-size car with a body size of: length 4873mm, width 1852mm, height 1470mm, wheelbase of 2850mm, fuel tank capacity of 62.5l, luggage compartment capacity of 516 to 986l, and a body weight of 1592kg. The 2020 1.5t Mondeo has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension, with a front-wheel drive system.
13
2
Share

How to Use the Engine Auto Start-Stop Button?

Usage of the engine auto start-stop button: Once the car is started, the engine auto start-stop system is in normal working condition. When encountering a red light or stopping for other reasons while driving, press the brake, and the engine will automatically shut off after two seconds. To start again, simply release the brake and press the accelerator or gently turn the steering wheel, at which point the engine will restart. Precautions for using auto start-stop: 1. Turn off start-stop in traffic jams: Stop-and-go traffic conditions are not suitable for auto start-stop, as repeated starts and stops not only increase fuel consumption but also add burden to the engine; 2. Turn off start-stop on slopes: When driving on steep slopes, try not to use auto start-stop, because although the auto start-stop time is very brief, the engine's start-stop on a slope may lead to insufficient brake assistance.
8
5
Share

Can Modified Xenon Lights Pass the Annual Vehicle Inspection?

Whether modified xenon lights can pass the annual vehicle inspection depends on the specific circumstances: 1. If only the light bulbs were replaced during the headlight modification, this type of modification will not pass the annual inspection; 2. If the modified xenon lights are equipped with lenses and the color temperature is adjusted to below 6000K, they can pass the annual inspection. Xenon lights refer to high-pressure gas discharge lamps filled with a mixture of inert gases, including xenon, and without the filaments found in halogen lamps. They are abbreviated as HID xenon lights, also known as metal halide lamps or xenon lamps, and are categorized into automotive xenon lights and outdoor lighting xenon lights.
8
2
Share

What is the function of a fuel pump?

The function of a fuel pump is to draw fuel from the fuel tank during engine operation and continuously deliver it to the engine at a certain pressure through the fuel supply line. The fuel is then pressurized a second time by the high-pressure fuel pump and supplied in precise quantities to each cylinder according to the engine's firing order. Currently, most vehicles use vane-type electric fuel pumps, which offer advantages such as high fuel delivery volume, high and stable fuel pressure, low noise, and long service life. When troubleshooting a fuel pump in a vehicle that has been in use for an extended period, it is important to avoid dry testing the fuel pump. This is because after removing the fuel pump, residual fuel remains inside the pump housing. If the brushes and commutator make poor contact during electrical testing, sparks may occur, potentially igniting the fuel inside the pump housing and causing an explosion.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.