Can the sunroof of the Discovery Sport be opened?

1 Answers
GarrettDella
07/30/25 3:14am
The sunroof of the Discovery Sport can be opened. Daily lubrication of the sunroof: Fully open the car sunroof, wipe the dust off the slide rails with a clean soft cloth, and use a lubricant that does not easily attract dust to lubricate the slide rail parts and transmission pipes of the sunroof. Sunroof cleaning precautions: In spring and autumn, you can clean the sealing ring once every quarter with a wet sponge. Before the vehicle is parked for a long time, use talcum powder to thoroughly clean the sunroof once to prevent the rubber seal from aging due to chemical changes in the air over time. When using a high-pressure gun for car washing: When washing the car with a high-pressure water gun, do not spray water directly at the sealing ring around the sunroof, as this can easily cause the sealing ring to deform under the pressure of the high-pressure water jet.
Was this review help?
4
2
Share
More Forum Discussions

What Causes the Rattling Noise When a Car Accelerates Rapidly Uphill?

When a car accelerates rapidly uphill, the engine may produce a rattling noise due to the following reasons: 1. Check for engine knocking: Inspect from these aspects—the octane rating of the gasoline, carbon deposits in the combustion chamber, and spark plug malfunctions. Examine each one and eliminate them one by one. 2. Check for carbon deposits inside the engine: Long-term incomplete combustion causes carbon components in the gasoline to remain inside the engine, forming carbon deposits. 3. Fuel system malfunction: If any part of the fuel line or fuel injector is clogged, it can prevent fuel from participating in combustion in a timely manner.
10
5
Share

How to Remove the Valve Stem Seal on the Santa Fe?

Here are the steps to remove the valve stem seal on the Santa Fe: 1. Remove the camshaft and hydraulic tappets, storing them face down. Note that the tappets are not interchangeable during this operation. Use a spark plug wrench to remove the spark plugs, then position the piston of the corresponding cylinder at top dead center. Screw the pressure hose into the spark plug threaded hole. 2. Bolt the spring compression tool onto the cylinder head. Adjust the relevant valve to the correct position, then connect the pressure hose to the air compressor with an air pressure of at least 600 kPa. Use the threaded mandrel and thrust piece to press down the valve spring, then remove the spring. 3. Gently tap the valve spring seat to remove the valve lock. Use a tool to pull out the valve stem seal.
4
4
Share

How many kilometers can the first maintenance exceed?

The first maintenance can exceed 500 kilometers. The first maintenance time for a car is between 3 to 5 months, with a mileage range of 3,000 to 5,000 kilometers, and even up to 8,000 kilometers for some models. This variation is due to differences in specific technical conditions of vehicles. Generally, the first maintenance should not exceed 5,000 kilometers. Below is additional information: 1. First maintenance mileage: Typically, the first maintenance is performed around 5,000 kilometers, though many 4S shops now recommend maintenance at approximately 3,000 kilometers. 2. Maintenance precautions: Maintenance generally involves checking the vehicle for issues, changing the oil and filters, and sometimes includes services like applying protective films. During maintenance, pay attention to the oil change process, as many 4S shops may claim to use fully synthetic oil during maintenance when selling the vehicle.
19
0
Share

The elevated speed limit is 80km/h, how fast can you actually drive?

Strictly speaking, with a speed limit of 80km/h, you should only drive below 80km/h and not exceed it. However, in actual enforcement, exceeding the speed limit by no more than 10% is not penalized, meaning you can drive up to 88km/h without penalty for an 80km/h limit. Relevant information about speed limits is as follows: 1. Introduction to speed limits: Speed limits generally refer to the regulation of driving speeds within a certain numerical range over a specified distance of road. 2. Purpose of speed limits: The main purpose is to preemptively remind drivers to reasonably control their speed in subsequent road sections ahead, prevent the dangers of speeding, and ensure driving safety. Speed limits are an indispensable and most critical aspect of road transport safety.
15
3
Share

Where is Changan Oushang produced?

Changan Oushang is produced in Nanjing. Changan Commercial Vehicle has released official images of its new MPV model, named Oushang, a seven-seat family MPV with a 2+3+2 seating arrangement. Additional related information is as follows: Exterior: The Oushang features a large horizontal chrome grille, and the air intake on the bumper adopts a 'smiling' design. Interior: The interior of the Changan Oushang is equipped with an all-digital integrated instrument panel. Features: The new car comes with GPS navigation, a rearview camera, 270-degree radar, Bluetooth calling, hill-start assist, an electric sunroof, and more. In terms of noise insulation, the cabin noise at idle is 39 decibels.
14
3
Share

What is the fuel consumption of the Haval H9?

Haval H9 fuel consumption is 9.8L-12.3L. Extended factors affecting fuel consumption are as follows: Driving conditions: Potholes on the road will consume more fuel, and driving in low gear for a long time will inevitably increase fuel consumption. Overloaded trunk: Carrying too much weight in the trunk increases fuel consumption. Lack of engine maintenance: Neglecting engine maintenance leads to higher fuel consumption, and issues with the engine ignition system, such as inaccurate ignition timing, wire leakage, or spark plug carbon buildup causing weak ignition, can significantly reduce engine combustion efficiency and increase fuel consumption. Insufficient tire pressure: Low tire pressure results in increased fuel consumption.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.