Can the Subject 2 Driving Test Appointment Be Cancelled After Booking?

What is the tutorial for replacing the steering wheel of a BMW 5 Series?

Tutorial for replacing the steering wheel of a BMW 5 Series: 1. There are small holes behind the steering wheel of this car; 2. Insert an object into the small holes to poke and remove the airbag cover; 3. Then unscrew the screws to remove the steering wheel. The BMW 5 Series is a mid-size luxury sedan under BMW. The new BMW 5 Series is equipped with three engines: a low-power version of the 2.0-liter turbocharged engine, a high-power version of the 2.0-liter turbocharged engine, and a 3.0-liter inline six-cylinder turbocharged engine. Among them, the low-power version of the 2.0-liter turbocharged engine is coded as b48b20c, with a maximum power of 135 kW, a maximum torque of 290 Nm, a maximum power speed of 5000 to 6500 rpm, and a maximum torque speed of 1350 to 4250 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.

10

4

Share

What does the DS gear mean in an automatic transmission car?

D gear is the drive gear, also known as the forward gear, used when moving forward. S stands for Sport mode. When this gear is engaged, the transmission can shift freely, but the shift timing is delayed, keeping the engine at high RPM for a period to increase the car's power. Generally, automatic transmission cars have six gear positions from top to bottom: P, R, N, D, S, L. Here are the details: 1. P gear: Parking gear, used when the vehicle is parked and not in use. The wheels are mechanically locked to prevent rolling. 2. R gear: Reverse gear, used when reversing. 3. N gear: Neutral gear, used for temporary stops (e.g., at a red light). Note that this gear indicates neutral, and to prevent the vehicle from rolling on a slope, the brake must be applied. 4. L gear: Low gear. When going downhill or on a long slope, engaging this gear limits the car to the lowest gear (equivalent to first gear in a manual transmission car), allowing the engine to assist in braking, reducing the need for prolonged brake use and preventing brake overheating and potential hazards.

7

2

Share

Which Material is Better for Spark Plugs?

Spark plugs made of precious metals are better. The spark plug is a crucial component in the ignition system of a gasoline engine. It introduces high-voltage electricity into the combustion chamber, causing it to jump across the electrode gap and generate a spark, thereby igniting the combustible air-fuel mixture in the cylinder. The spark plug mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. The main types of spark plugs include: standard spark plugs, extended insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs. Under high voltage, the air between the center electrode and the side electrode of the spark plug rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties and forming a discharge channel in the gap, resulting in a "breakdown" phenomenon. At this point, the gas becomes a luminous body, known as a "spark." Along with the heat expansion, a "snapping" sound is produced. The temperature of this electric spark can reach 2000–3000°C, which is sufficient to ignite the air-fuel mixture in the cylinder's combustion chamber.

1

0

Share

What are the advantages of a Torsen differential?

Advantages are as follows: 1. Advantage one: The Torsen differential achieves constant and continuous torque control management. It operates continuously without any time delay, yet it does not interfere with the adjustment of total torque output, thus eliminating any torque loss. Compared to traction control and vehicle stability control systems, it offers greater superiority. Since it lacks the multi-plate clutches found in traditional self-locking differentials, there is no wear and tear, making it maintenance-free. The purely mechanical LSD boasts excellent reliability. 2. Advantage two: The Torsen differential can be matched with any transmission or transfer case and is compatible with other vehicle safety control systems such as ABS, TCS (Traction Control Systems), and SCS (Stability Control Systems). The Torsen differential is a purely mechanical structure that activates the moment a wheel begins to slip, featuring a linear locking characteristic. 3. Advantage three: The Torsen limited-slip differential is a fully automatic, purely mechanical limited-slip differential that is highly reliable, durable, and quick to respond. From certain perspectives, it represents a very balanced design. It can respond to torque differences between drive wheels in a very short time, adjusting torque output to address wheel differential issues. Moreover, its locking characteristic is highly linear and can be adjusted over a relatively wide torque range without being limited by the structural space of the differential housing, thus maximizing its effectiveness.

1

0

Share

What are the test contents for Subject 1, Subject 2, Subject 3, and Subject 4?

Subject 1, Subject 2, Subject 3, and Subject 4 have the following test contents: 1. Subject 1: Traffic regulations and related knowledge. Computer-based test with questions mainly in the form of cases, pictures, and animations. There are 100 questions in total, each worth 1 point. The question types include true/false, single-choice, and multiple-choice. 2. Subject 2: Field driving. On-site driving assessment includes reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). 3. Subject 3: Road driving. Assessment on highways or simulated roads includes preparation before driving, simulated light test, starting, driving straight, gear shifting operations, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and night driving. 4. Subject 4: Safety and civilized driving knowledge. Computer-based test with questions mainly in the form of cases, pictures, and animations. There are 50 questions in total, each worth 2 points. The question types include true/false, single-choice, and multiple-choice.

2

4

Share

Can I Pick Up My Car the Same Day for Body Repair and Painting?

Body repair and painting involve complex procedures that are time-consuming, making it impossible to complete the entire process and allow for same-day pickup. If the vehicle has extensive damage, the time required will be even longer. Body repair and painting, commonly referred to as "bodywork and spray painting," are necessary when a vehicle has been in a collision, resulting in scratches or, more severely, deformations. Body repair involves reshaping and restoring the deformed areas of the vehicle, while painting restores the color and gloss to match the pre-collision condition. The workflow for body repair and painting is as follows: 1. Assessment: Before starting the repair, the technician evaluates the extent of the damage to determine the appropriate repair plan, as different levels of damage require different solutions. 2. Body Shaping: The deformed areas undergo cutting, grinding, stretching, heat treatment, and oxidation restoration. It's important to note that body repair not only aims to restore the vehicle's original appearance but also to maintain the metal's hardness as much as possible. 3. Filler Application: After body shaping, the technician applies filler to the body to sculpt the contours and adjust the smoothness. 4. Paint Application: The painting process is intricate, involving multiple steps such as primer coating, mid-coat application, color matching, topcoat spraying, and paint drying, all of which must be performed in a dust-free environment. 5. Paint Finishing: Even after painting, minor imperfections may remain. The technician then uses ultra-fine sandpaper or a polishing machine to refine the surface, restoring the vehicle's shine.

17

5

Share

Can the Subject 2 Driving Test Appointment Be Cancelled After Booking?

What is the tutorial for replacing the steering wheel of a BMW 5 Series?

What does the DS gear mean in an automatic transmission car?

Which Material is Better for Spark Plugs?

What are the advantages of a Torsen differential?

What are the test contents for Subject 1, Subject 2, Subject 3, and Subject 4?

Can I Pick Up My Car the Same Day for Body Repair and Painting?

How often should the alternator belt of a BMW 5 Series be replaced?

Can Antifreeze Prevent Rust?

What is Saferich Tire?

What are the causes of a lean air-fuel mixture fault in the BMW X1 three-cylinder engine?