Can the power steering pump pressure of Mitsubishi Pajero be adjusted?

Where is the gear shift in a Mercedes-Benz?

In Mercedes-Benz vehicles, the gear shift is located behind the right side of the steering wheel, known as a column shifter. Press the brake and move the shifter up and down to select R (Reverse), N (Neutral), and D (Drive) gears. Press the button on the edge inward for P (Park). For non-electronic gear shifts, the operation is similar to conventional ones, with a zigzag shifting path to clearly distinguish gears, though it may not be as comfortable as straight-line shifts. Another type is the electronic gear shift, positioned where the windshield wiper switch is in regular cars. Pulling it upwards selects N and R gears, while pushing it down selects D gear. Pressing the P button engages Park. Mercedes-Benz automatic transmissions with driving mode selection feature buttons like (W, S) or (C, S) (M, C, S) on the control panel, with the following functions: W/C mode: Represents Snow and Comfort driving modes. It starts in 2nd gear, shifts up early, and ensures smooth gear transitions, suitable for normal driving with economical fuel consumption. S mode: Represents Sport mode. It shifts up later, providing a slight impact during gear changes, suitable for drivers who prefer a sporty driving feel and better acceleration performance, though with higher fuel consumption. C mode: Represents Manual mode. For vehicles equipped with paddle shifters on the steering wheel, drivers can manually control gear shifts, ideal for those seeking extreme driving sensations. Fuel consumption varies significantly based on driving demands. For the Mercedes-Benz S-Class, regardless of the "C/S/M" gear setting, the key factor for engaging the 7th gear is vehicle speed.

19

4

Share

Is the Audi A6 a China V or China VI vehicle?

The Audi A6 complies with the China V (National Five) emission standard. Below is an introduction to the Audi A6: 1. Exterior: The Audi A6 adopts the latest family design language, featuring a large hexagonal grille with high recognition and LED headlights on both sides. The waistline of the car is prominent at both the front and rear, giving it a more powerful appearance. At the rear, the LED taillights are connected by chrome trim, maintaining design consistency with the new generation A7 and A8. 2. Dimensions: The car measures 4948 mm in length, 1898 mm in width, and 1479 mm in height, with a wheelbase of 2914 mm. 3. Interior: The Audi A6 boasts a clean and modern design, with a full LCD instrument panel supporting multiple display types. A 10.1-inch multimedia LCD screen is embedded in the black panel of the center console, while the air conditioning system controls below feature an 8.6-inch full LCD display, enhancing both flatness and technological appeal. The middle layer of the center console is divided by chrome trim, highlighting the design. 4. Powertrain: The currently available imported Audi A6 models include three variants, with three engine options: 1.8T, 2.0T, and 3.0T, paired with a dual-clutch transmission. The maximum power output is 245.0 kW, with a maximum horsepower of 333 PS and a maximum torque of 440.0 Nm.

12

3

Share

Should the front axle rubber of the Sylphy be replaced with a rubber sleeve or the entire assembly?

The front axle rubber of the Sylphy needs to be replaced with the entire assembly because the front axle rubber sleeve and the front axle are integrated. The front axle is connected to the steering system via the steering knuckle, transmitting the steering force from the steering gear to the wheels to achieve vehicle steering. The components of the front axle are as follows: 1. Front axle: As the main component, the front axle is generally made of medium-carbon steel through die forging and heat treatment. Its cross-section is I-shaped or, to improve torsional strength, has a thickened section near each end shaped like a fist, with a through-hole where the kingpin is inserted. The middle part is bent downward into a concave shape to lower the engine position, thereby reducing the vehicle's center of gravity. 2. Steering knuckle: This is the hinge for wheel steering, shaped like a fork. The upper and lower forks have coaxial holes for installing the kingpin, and the steering knuckle spindle is used to mount the wheel. The ears on the steering knuckle's pin holes are connected to the fist-shaped parts at both ends of the front axle via the kingpin, allowing the front wheels to pivot around the kingpin for steering. 3. Kingpin: This connects the front axle and the steering knuckle, enabling the steering knuckle to swing around the kingpin for wheel steering. The middle of the kingpin has a groove; during installation, the kingpin fixing bolt aligns with this groove to secure the kingpin in the fist-shaped hole of the front axle. 4. Wheel hub: The wheel hub is supported on the spindle at the outer end of the steering knuckle via two tapered roller bearings. The bearing tightness can be adjusted with an adjustment nut (located at the outer end of the bearing). The outer end of the hub is covered with a pressed metal cap, and the inner end is equipped with an oil seal. The brake backing plate and dust cover are both fixed to the steering knuckle.

11

3

Share

Can I Wear Makeup for the Subject 1 Test?

It is advisable not to wear heavy makeup during the Subject 1 test, and there are no specific requirements for clothing. The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulates that the Subject 1 test can be taken twice on the same day. If you fail the first attempt, you can take a second free retest. If you still fail the second attempt, the Subject 1 test will be terminated, and you can only reschedule the test after ten days. Subject 1, also known as the Subject 1 theory test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The Subject 1 test consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point and a total score of 100. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the exam. The Subject 1 test is computer-based and has a time limit of 45 minutes. Subject 1 test content: Driving license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; Special knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: During the test, candidates should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering, check your assigned seat at the identity verification area and begin the test. Ensure the camera is aimed at you and follow exam discipline. If you fail the first attempt, you can retake the test on the same day. If you fail again, you will need to pay to reschedule. After the test, queue to collect your score sheet and sign it. Failure to sign will render the test invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, and if you fail, you can retake it once. If you do not take the retest or fail the retest, the test will be terminated, and you must reschedule. In contrast, Subject 2 and Subject 3 only allow five attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include Subject 4.

15

5

Share

Can you make a U-turn on a yellow single dashed line?

A U-turn is allowed on a yellow single dashed line when there is no prohibition sign and it does not affect normal traffic flow. However, a U-turn is not permitted on a single solid line, as it constitutes a traffic violation. According to the "Road Traffic Safety Law," violators will be fined 200 yuan and receive 3 penalty points. On long roads, white or yellow solid or dashed lines are usually marked in the middle section or before intersections. U-turns are prohibited on any solid line. Scenarios where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign at an intersection, a U-turn is permitted. If there is a U-turn traffic light, follow its instructions. In the absence of a traffic light, make a U-turn based on the situation, ensuring it does not obstruct other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: If there is no clear prohibition, a U-turn is allowed. "No explicit prohibition" means the intersection lacks signs like "No U-turn," "No left turn," or a solid center line, in which case a U-turn is safe. Yellow grid lines also permit U-turns: Yellow grid lines indicate no-parking zones, typically at intersections prone to congestion or near important facilities. While parking on these lines is prohibited, U-turns are allowed unless there is a central barrier. Yellow grid lines without barriers are equivalent to "U-turn permitted." Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn light, proceed only when it is green. When no-left-turn and U-turn-permitted signs coexist: U-turns are allowed, but left turns are prohibited. Note that "No U-turn" is not the same as "No left turn." Precautions when making a U-turn at an intersection: Check road markings: If the line is solid, a U-turn is prohibited under any circumstances. Continue driving to find a suitable spot. If there is a "No left turn" sign, even without a "No U-turn" sign, a U-turn is not allowed at that intersection, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted at that intersection. Always yield to oncoming traffic and ensure your U-turn does not disrupt the flow of straight-moving vehicles, or you will bear full responsibility for any accident. Near intersection stop lines, lanes often have guiding arrows. Not all leftmost lanes have left-turn arrows; some may have straight arrows. Even without explicit prohibitions, U-turns are not allowed in such lanes. U-turns on crosswalks are also prohibited and constitute a traffic violation.

14

5

Share

Is it mandatory to install ETC?

It is not mandatory but encouraged for vehicle owners to install ETC. According to the State Council's regulations, vehicles without ETC installed by 2020 will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and vehicles can only pay tolls through manual lanes. Additionally, newly installed ETC devices cannot be used on highways immediately; they must be activated first. During free holiday periods, vehicles with ETC can still use highways, and no fees will be deducted for ETC users passing through ETC lanes. The principle of ETC fee deduction: There will be one or more ETC lanes on highways. Through microwave-specific short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, the purpose of vehicles not needing to stop at toll stations to pay road and bridge fees is achieved. All this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Green and low-carbon, vehicles passing through toll stations without stopping can reduce noise and exhaust emissions, minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also explicitly set the goal in the main indicators of the "13th Five-Year" comprehensive transportation development: "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, efforts will be made to promote the use of ETC for trucks in the future. Exploration will be conducted for the deep integration of the ETC system with the development directions of smart transportation, such as vehicle-to-vehicle communication and vehicle-road coordination, to provide vehicle owners with comprehensive travel services. This means more application scenarios will support ETC applications.

3

Share

Can the power steering pump pressure of Mitsubishi Pajero be adjusted?

Where is the gear shift in a Mercedes-Benz?

Is the Audi A6 a China V or China VI vehicle?

Should the front axle rubber of the Sylphy be replaced with a rubber sleeve or the entire assembly?

Can I Wear Makeup for the Subject 1 Test?

Can you make a U-turn on a yellow single dashed line?

Is it mandatory to install ETC?

What are the differences between the Bora and Lavida?

Scraped Someone Else's Car in the Parking Lot and Left

What is the actual 0-100 km/h acceleration time of the BMW M8?

Is Antifreeze Corrosive?