Can the position lights and low beam lights be turned on simultaneously?

2 Answers
DeBriella
07/24/25 9:35am
Position lights and low beam lights can be turned on simultaneously. Position lights, also known as marker lights or commonly referred to as small lights, serve as warning indicators for vehicles. They are primarily used in conditions such as rainy or foggy weather. Low beam lights are used for illumination, with a lighting range of approximately 30 to 40 meters, and are mainly used during nighttime driving. During nighttime driving, vehicles must have both position lights and rear position lights turned on. At dusk or during twilight, position lights should be activated to alert vehicles in front and behind, making the moving vehicle more noticeable and helping to prevent traffic accidents. In rainy weather, position lights must be turned on. In foggy conditions, when visibility is low or the view is unclear, position lights should also be activated because in such conditions, pedestrians, slow-moving vehicles, broken-down vehicles, and potholes are harder to spot, increasing the risk of traffic accidents.
Was this review help?
8
0
Share
DeOwen
08/11/25 4:51am
I commute by car every day, and I can confidently say that the parking lights and low beams can be turned on simultaneously. In fact, in most modern vehicles, when you turn the light switch to the low beam position, the parking lights will automatically come on as well. This is designed to enhance your car's visibility at night or in low-light conditions, making it easier for other drivers to see the front and sides of your vehicle. It's simple to operate: no extra buttons are needed—just turn the switch. I often drive in rain or at dusk, ensuring both are on to reduce the risk of accidents, making it both safer and more convenient. Give it a try—it won’t drain your battery or damage your car. Remember, safe driving is the top priority, and keeping all your lights on will make you more confident and composed on the road. This design is truly practical; I never drive with the parking lights off alone—they always work together with the low beams.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What is the identification of fully synthetic oil?

Imported fully synthetic oil is typically labeled with the letters FULLY-SYNTHETIC or 100% SYNTHETIC, or you can check for labels indicating PAO and ester oil. Here is some relevant information: 1. Grade: The current main grade for fully synthetic oil is SN. API stands for the American Petroleum Institute, and the grades range from SA to SN, with SN being the highest grade available. 2. Composition: Fully synthetic oil models consist of the API quality grade and the SAE viscosity grade. SAE stands for the Society of Automotive Engineers and generally refers to the SAE standard viscosity value. The 'W' stands for WINTER. Viscosity grades for fully synthetic oil include 5W-30, 5W-40, and 0W-30, among others. The first number represents the freezing point temperature, while 40 indicates that the kinematic viscosity standard at 100°C is between 12.5mm2/s and 16.3mm2/s.
3
4
Share

How many kilometers should the brake pads of the Malibu XL be replaced?

The brake pads of the Malibu XL should be replaced after 30,000 kilometers. Below is additional information about the 2021 Malibu XL: Exterior dimensions: It belongs to the mid-size car category, with body dimensions of: length 4933mm, width 1854mm, height 1472mm, wheelbase 2829mm, fuel tank capacity 55l, and curb weight 1430kg. Interior design: The 2021 Malibu XL features a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, maximum power of 124kw, maximum torque of 250nm, paired with a 9-speed automatic transmission.
2
1
Share

What are the steps to replace the air conditioning filter in an old Regal?

The steps to replace the air conditioning filter in an old Regal are: 1. Open the glove compartment cover on the passenger side; 2. Press and hold the fixing buckle firmly and pull it outward; 3. After removing the fixing buckle, take off the cover; 4. Remove the entire glove compartment; 5. Dismantle the air conditioning filter cover; 6. When replacing the car's air conditioning filter, grab one end of the old filter and pull it outward to remove and replace it. Taking the 2020 Buick Regal as an example, it belongs to the mid-size car category with body dimensions of: length 4904mm, width 1863mm, height 1461mm, wheelbase 2829mm, fuel tank capacity 55l, and trunk capacity 441l. The 2020 Buick Regal is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, maximum torque of 250Nm, paired with a 9-speed automatic transmission.
4
5
Share

Is the Lynk & Co 03 Sedan Equipped with a Volvo Engine?

The Lynk & Co 03 sedan is not equipped with a Volvo engine. The engine of the Lynk & Co 03 is jointly developed by Geely Auto and Volvo Cars. Taking the 2021 Lynk & Co 03 as an example, it belongs to the compact car category with body dimensions of 4639mm in length, 1840mm in width, and 1472mm in height, a wheelbase of 2730mm, and a curb weight of 1395kg. The 2021 Lynk & Co 03 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is powered by a 1.5T turbocharged engine delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 245Nm, paired with a 6-speed manual transmission.
6
1
Share

What is the tire model of the Hyundai Elantra?

The tire model of the Elantra is 195/65r15. The following is a related introduction about tire pressure: Tire pressure: Both excessively high or low tire pressure will affect the service life of the tire. In winter, the tire pressure can be slightly higher than in summer. The recommended summer tire pressure is between 2.2-2.5bar, and the winter tire pressure should not exceed 2.8bar. Adjust the tire pressure appropriately according to the load conditions. Insufficient inflation pressure: Insufficient tire inflation pressure can also cause excessive tire wear, poor vehicle control, and reduced fuel economy. It may also lead to wheel deformation, so the tire inflation pressure should be kept within the specified value. Excessive inflation pressure: If the tire inflation pressure is too high, it will cause discomfort during driving, excessive wear in the center of the tire tread, and increase the possibility of tire damage on hazardous road surfaces.
9
2
Share

What are the methods for treating rust on a sedan?

Methods for treating rust on a sedan are: 1. Remove the paint from the rusted area using a wire brush or sandpaper, and decide whether to replace the entire panel or repair the damaged part based on the extent of the damage; 2. For severe damage, apply zinc sand to the hole and then spread filler around the sand, fill with filler, and repaint; 3. For minor damage, use thin aluminum sheet to patch, press it firmly onto the panel, then fill with filler and repaint. The reasons for car body rust include: 1. Uneven roads causing body vibration; 2. Engine operation-induced vibration leading to welded connections coming apart or cracking; 3. Sun exposure and extreme cold causing paint surface cracking; 4. Thin steel sheets being eroded by moisture, damaging the protective layers on both inner and outer surfaces, leading to gradual body corrosion.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.