Can the Mercedes-Benz CLA Continue Driving When the Coolant Warning Light Comes On?

1 Answers
DiBrandon
07/30/25 10:32am
If the Mercedes-Benz CLA displays a coolant warning, you should not continue driving and must contact a maintenance technician for inspection. Continuing to drive may cause the engine temperature to rise excessively, leading to engine damage. Overheating Coolant: If the coolant warning is triggered due to high engine temperature, it is best to pull over safely. Do not turn off the engine—let it idle, open the hood, and allow it to cool until the temperature warning disappears. Insufficient Coolant: If the coolant warning is due to low coolant levels and you do not have coolant available for immediate replenishment, you can add an appropriate amount of purified water—preferably soft water (such as distilled water). Note that hard water, like tap water, should not be used, and the added amount should not be excessive, as it may alter the coolant's boiling point.
Was this review help?
18
5
Share
More Forum Discussions

What is the difference between C1D and C1E?

The most obvious difference between C1D and C1E lies in the permitted vehicle types. D driving license: Permitted vehicle types include ordinary three-wheeled motorcycles, with additional permitted types including E and F. E driving license: Permitted vehicle types include ordinary two-wheeled motorcycles, with additional permitted types including F. In comparison, C1D allows for more vehicle types. Driving license categories: Motor vehicle driving licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, P. Driving license validity period: Article 56 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": If a motor vehicle driver does not accumulate 12 penalty points in any scoring cycle during the six-year validity period of the motor vehicle driving license, the license will be renewed with a ten-year validity period; if the driver does not accumulate 12 penalty points in any scoring cycle during the ten-year validity period, the license will be renewed with a long-term validity period.
11
0
Share

How many liters does a full CX5 fuel tank hold?

56 liters. The Mazda CX5 has a fuel tank capacity of 56 liters, and it can still run about 50KM when the fuel gauge shows empty. Fuel tanks can be divided into two types: open fuel tanks and closed fuel tanks. Here are the relevant introductions about fuel tanks: 1. Open fuel tank: In an open fuel tank, the liquid level is connected to the atmosphere, and an air filter is installed on the fuel tank cap. Open fuel tanks have a simple structure and are easy to install and maintain, making them commonly used in hydraulic systems. 2. Closed fuel tank: Closed fuel tanks are generally used for pressurized fuel tanks, filled with a certain pressure of inert gas, with the inflation pressure reaching up to 0.05MPa.
15
3
Share

Does Engine Oil Decrease with Use?

Engine oil does decrease with use, for the following reasons: 1. Normal lubrication loss: During each lubrication cycle, a small amount of oil in the gaps will enter the combustion chamber, leading to a gradual decrease in oil volume. 2. Oil evaporation: Due to heat, engine oil can evaporate, resulting in a reduction over time. 3. Sealing issues: Oil may leak through gaps, causing it to diminish with use.
4
1
Share

What is the reason why the gl8es electric door cannot open automatically?

gl8es electric door cannot open automatically due to controller failure. The Buick gl8 electric door can be closed in four ways: by pressing the close button on the main driver's seat, pressing the close button on the car key, pulling the door handle from the outside, or pressing the side button on the main driver's seat. The following are the specific details of the Buick gl8: 1. Positioning model: The Buick gl8 is a mid-to-high-end MPV launched by SAIC-GM Buick. 2. Power: This car is equipped with a 2.0T SIDI direct-injection turbocharged engine, with a maximum power of 191kw and a maximum torque of 350 Nm. In terms of the transmission system, the engine is matched with a 6-speed automatic transmission. During operation, the engine can output the maximum power when the speed reaches 5400 rpm, and the maximum torque when the speed reaches 2000-5000 rpm.
20
0
Share

Why is the steering of a large truck unstable and difficult to control?

The causes of steering wheel shaking or wobbling include the destruction of the dynamic balance of the front wheel assembly due to tire patching or repair, loose parts in the drive shaft assembly, destruction of the dynamic balance of the drive shaft assembly, failure of the shock absorber, inconsistent stiffness of the leaf springs, wear and looseness of steering system components, and improper front wheel alignment. Below is more related information: 1. Always pay attention to abnormal noises in the vehicle: While driving, the driver should closely monitor the sounds from various parts of the vehicle. Once an abnormal noise is detected, the first step is to accurately determine whether the sound is coming from inside or outside the vehicle. If it is confirmed to be from inside the vehicle, it may not be a big issue; if it is from outside, the vehicle should be stopped for inspection. 2. Learn to read the faults on the dashboard: For novice drivers, learning to read the dashboard is very important. Pay frequent attention to the pointers on the dashboard and the icons displayed. Whenever a red light appears on the dashboard, stop the vehicle and turn off the engine for inspection as soon as possible.
20
4
Share

What Causes the Steering Wheel of Highlander to Make Abnormal Noises When Turning?

If the abnormal noise from the Highlander's steering wheel is heard coming from below the steering wheel, it is necessary to check the steering column dust cover. Once the steering column dust cover lacks lubrication, it will produce a dry friction sound. Simply applying some grease inside the dust cover will make this noise disappear. More relevant information is as follows: 1. Sound from the rebound clip: Additionally, if the sound from the rebound clip occurs only after turning on the turn signal and then turning the steering wheel, it is the sound from the rebound clip of the turn signal auto-return mechanism. This sound is normal. When turning the steering wheel smoothly, there will be a clicking sound, and for every full rotation of the steering wheel, there will be three clicking sounds. This is because there are three auto-return notches in one full rotation of the steering column, hence the sound. This sound will disappear as long as the turn signal is turned off. 2. "Clicking" sound: If a "clicking" sound is heard from below the steering wheel when turning it, it may be the sound from the universal joint in the steering column. In this case, lubricating the universal joint with grease can be tried. If the noise persists, this component may need to be replaced.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.