Can the ETC device still be used after being removed?

1 Answers
SanAmara
07/30/25 5:30am
Once removed and reinstalled, it cannot function normally. During installation, there is a button on the back of the device that connects to the windshield. Data is only saved when this button is pressed. When the device is removed a second time, the button pops out, triggering its reset mechanism and clearing all data. As a result, it becomes unusable and requires a complete reinstallation. ETC stands for Electronic-Toll-Collection, which is an electronic toll collection system. To apply for ETC, the vehicle owner must provide original and photocopies of their valid ID card and vehicle registration certificate. If applying through an agent, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed. Applicants must be between 18 and 60 years old, and the vehicle must be registered under their name. For company vehicles, the required documents include: An introduction letter from the vehicle owner (with official seal); a photocopy of the organization code certificate or business license (with official seal); the agent's original ID card; the original vehicle registration certificate; and the vehicle requiring ETC installation. How ETC works: The vehicle-mounted electronic tag, installed on the windshield, communicates with the microwave antenna in the ETC lane at toll stations. Through computer networking technology, it settles transactions with the bank in the background, allowing vehicles to pay highway or bridge tolls without stopping. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass toll stations without stopping; Cost-saving: Reduces wear and fuel consumption by minimizing vehicle starts and stops, and users can enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC technology is more mature and advantageous.
Was this review help?
2
5
Share
More Forum Discussions

How to Use a Steering Wheel Lock?

There are three main types of steering wheel locks available on the market: baseball bat type, U-shaped telescopic type, and T-shaped type. The steps for using a baseball bat-type steering wheel lock are as follows: 1. First, adjust the steering wheel to your preferred position. 2. Then, attach the lock's clasp to the horizontal bar of the steering wheel. 3. Hold the lock head with your left hand and the lock handle with your right hand. Finally, rotate it clockwise until the double clasps are securely fastened. 4. At this point, the steering wheel is locked by the baseball bat lock. To unlock it, simply insert the key and reverse the operation. U-shaped telescopic steering wheel lock: 1. First, insert the key into the lock and pull the lock outward to both sides with both hands. 2. Then, hook the left lock hook onto the left end of the steering wheel and the right lock hook onto the right side of the steering wheel. 3. Finally, pull both sides tightly and twist the key to unlock. T-shaped steering wheel lock: First, insert the key into the lock head and extend it to its maximum length. Then, remove the key and place the T-shaped lock on the steering wheel (at a suitable angle). Finally, gently push the front cover of the lock head backward until it fully fits the steering wheel.
4
5
Share

What Causes the Radiator Temperature to Be Too Low?

Radiator temperature being too low is usually caused by a faulty thermostat. When the thermostat malfunctions, the valve cannot close, causing the coolant to continuously circulate in the major loop, which may result in the engine's water temperature being too low. Another possible cause is a malfunctioning radiator electric fan that keeps running continuously. Below is a detailed explanation: 1. Most cars use water-cooled engines, which rely on coolant circulating within the engine to remove excess heat. In water-cooled engines, the coolant follows two circulation paths: a major loop and a minor loop. When the engine is first started, the coolant circulates in the minor loop, bypassing the radiator, which helps the engine warm up quickly. Once the engine reaches its normal operating temperature, the coolant switches to the major loop, passing through the radiator to dissipate heat, thereby maintaining the engine within a normal operating temperature range. 2. If the thermostat fails and the coolant continuously circulates in the major loop, the water temperature will drop too low, causing the radiator temperature to also become too low. If the electric fan behind the radiator malfunctions and keeps running, it can also lead to the radiator temperature dropping too low. Additionally, a faulty coolant temperature sensor may cause the electric fan to run continuously. If such issues occur, car owners should inspect the thermostat, coolant temperature sensor, and electric fan.
2
2
Share

How to turn off winter tires when exceeding 30km/h?

Remember to replace all four tires simultaneously. Partial replacement may cause uneven traction between the four wheels and the road surface, potentially creating safety hazards. Winter tires are made of relatively softer materials with wider and deeper tread patterns, providing enhanced grip and anti-skid performance on snow and ice surfaces.
13
0
Share

How to Adjust the Reversing Camera When It Shows the License Plate?

It is recommended to first loosen the corresponding screws on the camera mount, then gently lift the camera upward until it returns to its original position. Then tighten the bolts. It is advisable to apply some grease on the bolts to prevent rusting and ensure future adjustability.
10
2
Share

What is the positioning of the Honda Cool Shadow?

Honda does not have a model named Cool Shadow. The only similar model under Honda is the Breeze, which is a compact SUV. The Breeze is a sister model to the CR-V, making them vehicles of the same class. The Breeze is equipped with two types of engines: a 2.0-liter naturally aspirated engine and a 1.5-liter turbocharged engine. More details are as follows: 1. The model equipped with the 2.0-liter naturally aspirated engine is a hybrid version. This engine delivers 146 horsepower and a maximum torque of 175 Nm, achieving peak power at 6,200 rpm and maximum torque at 3,500 rpm. It features i-VTEC technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 135 kW and a maximum torque of 315 Nm. 2. The 1.5-liter turbocharged engine produces 193 horsepower and a maximum torque of 243 Nm, reaching peak power at 5,600 rpm and maximum torque between 2,000 and 5,000 rpm. This engine incorporates VTEC technology and direct fuel injection, also using an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT. 3. The CVT transmission offers excellent shift smoothness and outstanding reliability and durability. The Breeze features a MacPherson independent front suspension and a multi-link independent rear suspension.
2
1
Share

What is the SM grade of engine oil?

SM is one of the quality grades of engine oil, ranking third after SN and SP grades. SM-grade engine oil includes both synthetic and mineral oils, such as LIQUI MOLY oil which is API SM grade. More details are as follows: 1. The API quality grade represents the quality level of engine oil, using simple codes to describe the working capability of engine oil. In the API quality grade, engine oil is divided into the S series and C series. The S series is specialized oil for gasoline vehicle engines, with grade levels including SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN, and SP, while the C series is specialized oil for diesel vehicles. 2. Whether it is gasoline or diesel engine oil, as the letter in the quality grade designation moves further in the alphabet, the grade improves sequentially, with the oil quality and performance becoming more superior. 3. When selecting engine oil, in addition to the viscosity grade, the quality grade is also an important indicator. Generally, the grade recommended in the maintenance manual or for the engine model is sufficient. However, if frequently driving in congested traffic conditions, it is advisable to use a higher grade of engine oil, which is more environmentally friendly and economical. Nevertheless, vehicle owners do not necessarily need to pursue the highest grade of engine oil, as while the oil quality and performance may be relatively superior, the price will also increase accordingly.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.