···
Log in / Register

Can the driving display screen of Audi A4 be retracted?

6Answers
Stephen
07/29/2025, 05:52:55 AM

Audi A4's driving display screen can be retracted. Steps to retract the driving display screen of Audi A4: Open the car door on the driver's side, step on the brake pedal to prepare to start the engine, turn on the power of the whole car, and then press and hold the volume button for more than 3 seconds. Introduction to the driving display screen: An electronic display located in the middle of the vehicle dashboard, used to display vehicle conditions, fuel consumption and other related information. Technical principle of the driving display screen: In fact, the driving computer display screen is to display part of the data in the driving computer. The ECU converts the input signal into digital form, processes it by comparing with the stored reference data, calculates the output value, and then amplifies the output signal to control several adjustment servo components.

Was this review help?
117
Share
DeAshlyn
08/13/2025, 07:55:22 AM

I've been driving an Audi A4 for several years, a 2016 model, and the display screen can indeed retract, featuring an electric folding design. When parking, just press a button and the screen retracts into the dashboard, protecting it from sun damage or dust accumulation. It's very convenient to unfold it while driving to view navigation or music interfaces. This feature was common in older models from 2010 to 2017, especially in sport or high-end versions. However, after the 2017 redesign, most new A4 models switched to fixed large screens, which offer more intuitive displays but lack the fun of retraction. I recommend buyers check the car's year and configuration; for used older models, test the function to ensure smooth operation and avoid expensive motor repairs if it gets stuck. Personally, I retract the screen when washing the car for peace of mind. In short, the early A4 models had this unique feature that enhanced their refined feel.

Was this review help?
12
Share
Expand All
MacFinley
10/06/2025, 04:25:35 AM

As a car enthusiast, the retractable display of the Audi A4 is a standout design feature of older models, primarily seen in the B8 generation. It uses an electric motor to retract the screen into the dashboard, preventing accidental damage or dust accumulation when parked, and optimizing space utilization. However, the motor components are prone to malfunctions. Later versions, such as those after 2018, mostly switched to fixed large screens to accommodate touch controls, simplifying maintenance and improving reliability. This shift reflects the evolution of automotive technology: while the retractable feature is cool, it adds complexity; fixed screens are straightforward and durable, aligning better with modern needs. When choosing a car, comparing model years is crucial—check the official configuration sheet to confirm the presence of this feature and avoid being misled.

Was this review help?
11
Share
Expand All
Doreen
11/19/2025, 10:05:05 PM

Young people discussing the Audi A4 screen retraction: So cool! Saw the electric retraction feature on a friend's 2014 high-end model—it's like a little tech magic when it switches. The screen extends for navigation while driving and retracts when parked, keeping the interface sleek and stylish. But the new A4 now has a fixed large touchscreen with fast response, making CarPlay a blast. We value practicality and trendiness; the old retractable feature was flashy, but the new design is safer and more convenient. When buying a used car, test if the function works to ensure the fun isn't outdated. Remember, base models might not have this.

Was this review help?
15
Share
Expand All
LaCorey
01/09/2026, 11:41:35 PM

Normal driving perspective: My Audi A4 is a 2017 model with a retractable display screen that can electrically retract to save space and protect against sun damage. The operation is smooth but requires regular dust cleaning. The newer post-2020 A4 models feature a fixed touchscreen that's larger and easier to operate, with less flashiness but improved safety. While driving, attention should remain on the road rather than fussing over features. The retractable design is aesthetically pleasing and practical, but the new screen is more stable. When purchasing a car, always check the user manual or consult the dealer to confirm specifications and avoid misunderstandings due to configuration differences.

Was this review help?
13
Share
Expand All
McGrace
04/06/2026, 04:25:07 AM

Reviewing the Evolution of Audi A4 Displays: As early as the 2010 model, it introduced an electrically retractable screen integrated with the MMI system, elegantly hiding the screen to reduce space occupation, suitable for high-end models. However, the 2017 redesign of the B9 generation shifted to a fixed large screen, eliminating mechanical issues and improving reliability. The old retractable function was exquisite and upscale but had a high failure rate and expensive repairs; the new model offers direct display, durability, and meets today's touchscreen demands. This change reflects the automotive shift from mechanical to digital. When buying a car, check the year and verify features to choose a practical solution.

Was this review help?
6
Share
Expand All
More Q&A

What are the hazards of parking with wheels not straightened?

The hazards of parking with wheels not straightened: 1. Accelerated aging of the steering tie rod. The tie rod remains under force for a long time and cannot return to its original position, leading to accelerated aging over time; 2. Accelerated aging of the power steering pump. When the hydraulic power steering system's pump pushes oil for steering but lacks a return oil action, it causes negative pressure in the pump, which over time accelerates its aging; 3. The suspension will tilt towards the direction the wheels are not straightened, causing accelerated wear on the soft-support rubber pads and bushings; 4. Increased force on the tire sidewalls leads to accelerated wear, which over time can result in dangerous situations like tire blowouts.
103
Share

What does an exclamation mark inside a Skoda bulb mean?

An exclamation mark inside a Skoda bulb is the bulb failure warning light, indicating that one of the car's bulbs is damaged. At this time, you should check which bulb is damaged and then replace the faulty bulb. The lights on a car include headlights, brake lights, turn signals, width indicators, fog lights, etc., and these lights are crucial for the car's driving safety. If the sealing of the lights is poor, moisture or water vapor can enter the light, which can easily burn out the filament. Therefore, it is important to protect the lights when using the car. Skoda is one of the classic brands of Volkswagen Group, founded in 1895 and headquartered in Mladá Boleslav, Czech Republic. It is one of the world's oldest car manufacturers.
106
Share

How to remove the wrench icon on Maxus G10?

Steps to remove the wrench icon on Maxus G10: 1. Switch the display to show remaining maintenance mileage; 2. Locate the round button at the top end of the turn signal lever; 3. Press this button 5 times consecutively within 3 seconds to clear the wrench indicator. The Maxus G10 is an MPV model under the Maxus brand, with a wheelbase of 3198mm and dimensions of 5168mm (length) × 1980mm (width) × 1928mm (height). In terms of power, the G10 offers two engine options: a 1.9L turbocharged diesel engine delivering 150 horsepower and 350Nm of maximum torque, and a 2.0L turbocharged gasoline engine producing 218 horsepower and 350Nm of maximum torque.
112
Share

Is the Volkswagen Phideon an Imported or Joint Venture Vehicle?

Volkswagen Phideon is a joint venture vehicle, a mid-to-large luxury sedan under SAIC Volkswagen. In terms of powertrain, the Phideon is equipped with two engines: one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter supercharged engine. The 2.0-liter turbocharged engine delivers a maximum power of 165 kW and a maximum torque of 350 Nm, while the 3.0-liter supercharged engine produces a maximum power of 220 kW and a maximum torque of 440 Nm. Regarding body dimensions, the Phideon measures 5074 mm in length, 1893 mm in width, and 1489 mm in height, with a wheelbase of 3009 mm. It features a five-link independent front suspension and a trapezoidal-link independent rear suspension.
108
Share

What Causes the Tachometer Not to Return to Zero?

The reasons why the tachometer does not return to zero: 1. The speedometer in the vehicle's instrument cluster malfunctions, causing the tachometer needle to stop moving; 2. The vehicle's mileage sensor fails. Check if the flexible shaft connection is disconnected, then observe whether the mileage starts to increase. If only the tachometer stops working, a new one must be replaced; 3. Foreign objects inside the instrument panel are stuck and cannot move. Open the instrument panel to remove the foreign objects. The tachometer is usually located within the instrument panel, symmetrically placed alongside the speedometer. The tachometer operates based on magnetic principles, receiving pulse signals generated when the primary current in the ignition coil is interrupted, and converting this signal into a displayable speed value. The faster the engine speed, the more pulses the ignition coil generates, resulting in a higher displayed speed value on the gauge.
110
Share

What causes the car to feel jerky?

The reason the car feels jerky is due to piston slap, which is an abnormal noise caused by the piston side hitting the cylinder wall. When the direction of the axial force on the piston top changes as the piston moves from the compression stroke to the power stroke, piston slap occurs. Each time the piston passes top dead center and moves downward, it is forced to hit the cylinder wall, leading to piston slap. The determining factor for piston slap is the clearance between the piston and the cylinder wall, commonly referred to as piston clearance. The effect of piston clearance on slap: when the engine is cold, the piston clearance is larger, resulting in louder knocking sounds. However, as the engine temperature rises, the piston clearance decreases accordingly, and the knocking sound diminishes. If piston slap occurs, it is advisable to promptly visit a repair shop for inspection and repair.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.