···
Log in / Register

Can the Changan Benben drive on highways?

4 Answers
VonRichard
07/29/25 4:02am

The Changan Benben can drive on highways, but as it is positioned as an urban commuter vehicle, overtaking on highways can be quite challenging. It is advisable not to speed. Highway driving age regulations: According to regulations, drivers with more than one year of driving experience can drive on highways alone. Novices with less than one year of experience must be accompanied by a driver who has held a corresponding or higher-level driving license for more than three years when driving on highways. Highway driving precautions: Check for potential hazards before driving, stay focused while driving, avoid fatigue driving, maintain a safe speed, report early and late (follow proper procedures), be cautious when driving at night, and handle tire blowouts correctly.

Was this review help?
7
1
Share
StCourtney
08/12/25 3:42pm

I think driving the Changan Benben on the highway is not a problem, but you need to be cautious. I have used this car for three years myself, often driving on suburban highways near the city. When I reach speeds of up to 100km/h, I feel the engine struggling, and the body starts to feel unstable at higher speeds—it feels like it could be blown away by strong winds. This car is designed for urban commuting, with low horsepower and poor stability. Even with the accelerator fully pressed on the highway, it struggles to pick up speed. I suggest only trying it on short trips in good weather and avoiding highways during rain, snow, or strong winds. Additionally, regularly checking tire pressure and brake pads can improve safety a bit. If you really need to travel long distances, it's better to switch to a more powerful car.

Was this review help?
9
0
Share
Expand All
SebastianFitz
10/02/25 8:22am

As a new driver, I've also been concerned about this issue. I've tried driving on the highway a few times, and when the speed goes above 80, the engine roars loudly, making my palms sweat with worry about potential accidents. The Chang'an Benben has a lightweight body, and when overtaking, the wind resistance from larger vehicles poses noticeable risks. I've learned my lesson: novice drivers should choose less congested times for highway driving, maintain steady speeds without exceeding limits, and keep ample safety distance. Don't forget to check the braking system during regular maintenance, as wear and tear happen quickly and require frequent inspections. Highway fuel consumption is also significantly higher than in the city, which tightens the budget.

Was this review help?
8
1
Share
Expand All
MacCharlotte
11/16/25 3:17am

From the perspective of automotive performance, the Changan Benben's powertrain is optimized for low-speed operation, and the engine is prone to high load and wear at high speeds. The small-displacement engine experiences soaring RPMs at high speeds, affecting durability; the lightweight body leads to a high drag coefficient and instability. Based on my test data, noise increases dramatically and handling becomes difficult above 100 km/h. Installing a stabilizer bar could improve this, but the original design is not suitable for frequent high-speed driving. If you must drive on highways, maintaining a speed between 60-100 km/h is safest, avoiding prolonged cruising.

Was this review help?
3
0
Share
Expand All
More Forum Discussions

How Many Levels Are There for Sedans?

Sedan classification standards are divided into four levels: A, B, C, and D. Class A cars are also known as compact cars: Among them, there are even smaller cars referred to as subcompact cars, or A0-class cars, such as the Vios, Fit, and Polo. Nowadays, some compact cars have started to be lengthened, such as the Lavida, Lamando, and Corolla, which some media refer to as A+ class cars. Their wheelbase is approximately 2.4 to 2.6 meters, and their displacement mostly ranges from 1.0 to 1.5 liters. Class B cars are also known as midsize cars: Models like the Magotan, Passat, Camry, Accord, BMW 3 Series, and Audi A4 belong to this category. Their wheelbase is around 2.7 to 2.9 meters, and their displacement ranges from 1.4 to 2.5 liters. Class C cars are also referred to as full-size cars: Their wheelbase is about 3 meters, and their displacement ranges from 2.0 to 3.0 liters. The most common Class C cars include the Audi A6, BMW 5 Series, and Mercedes-Benz E-Class. These cars can be considered luxury vehicles and are often used by large enterprises for business reception purposes. Class D cars are also known as large luxury cars: These can be described as perfect. Their wheelbase varies from 3.1 to 3.6 meters, and their displacement ranges from 2.0 to 6.6 liters. Representative models include the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Lexus LS, Bentley, and Rolls-Royce.
3
4
Share

Where is the air conditioning switch in a sedan?

The air conditioning switch in a sedan is generally located in the lower middle part of the center console. The 'A/C' button is the air conditioning switch. The first knob above it is for temperature adjustment. The second knob adjusts the fan speed, and turning it to '0' turns off the air conditioning. The third knob controls the air vent direction, with options for head, hands, and feet. Here is more related information: Car Air Conditioning: Car air conditioning refers to the air conditioning system installed in vehicles, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. The air conditioning system has become one of the indicators of a car's functionality. Air Conditioning Temperature: The air conditioning temperature should not be set too low. Choosing an appropriate temperature is the first step in maintaining the air conditioning system. Due to hot weather, many drivers prefer setting the temperature too low, which can affect health. Normally, the temperature inside the cabin should be 5℃ to 6℃ different from the outside temperature, meaning the optimal air conditioning temperature is between 18℃ and 25℃.
16
2
Share

What do J and ET mean in wheel data?

The width of the wheel is 7J or 8J. Here, the number represents the width of the wheel, while J represents the shape and height of the wheel flange. The ET value, also known as the ET offset, refers to the Off-set value, which is the deviation between the mounting surface of the wheel and the centerline of the rim, measured in millimeters. It can be positive, zero, or negative. Here is more related information: Considerations for J value during installation: Many car enthusiasts encounter various issues during wheel modification. For example, if the original wheel is 6JX15 inches and the original tire is 195/65/15, but you want to install a wheel with a width of 8JX17 inches, the standard tire should be 235/45/17. However, flatter tires are harder to find. During the modification process, based on the J value, you need to consider what you want to achieve when selecting the tire width. Choosing a point within the range affects both handling and ride comfort (comfort). A middle value balances both (but may slightly compromise both). Narrower tires affect handling, while wider tires affect comfort. Considerations for ET value during installation: Changing the wheel's Offset alters the wheel track, which is the distance between the centerlines of the tires. Simply increasing the wheel and tire size without changing the Off-set does not affect the wheel track. Impact of changing Off-set: Using a wheel with a smaller positive Off-set value widens the wheel track, reducing body roll during turns and improving cornering speed limits. However, it also increases the distance between the steering axis center and the tire center, making steering more difficult and increasing the load on the steering mechanism. This leads to greater deformation of the steering linkage, so Toe-in adjustments may be necessary to compensate.
16
0
Share

Is it okay if a car hasn't been serviced for over 10,000 kilometers?

It is not okay if a car hasn't been serviced for over 10,000 kilometers. It has been identified as "voluntarily giving up the three guarantees." Moreover, the engine is already very dirty, and there are many impurities in the engine oil, which will affect its lifespan. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Maintenance scope: Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
5
0
Share

How long is the validity period after passing the written test for a driver's license?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the validity period of the study driving certificate is three years, but the expiration date must not exceed the upper age limit for application. Applicants must complete the Subject Two and Subject Three tests within the validity period. If the tests are not completed within the validity period, the passing scores of the already completed subjects will be invalidated. Subject One, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license examination. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test format is computer-based, with a time limit of 45 minutes. Subject One consists of 100 single-choice and true/false questions, each worth one point. If 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the session. Subject One test content: Driver's license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One test precautions: During the test, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Inside the examination room, the identity verification station will assign a seat. After finding your seat, begin the test. Ensure the camera is aligned with you and follow test discipline. If you fail the first attempt, there is a retake opportunity on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can schedule the Subject One test. Each subject test allows one retake if you fail. If you do not take the retake or fail the retake, the test session ends, and the applicant must reschedule. For Subject Two and Subject Three, there are only five test attempts. Subject Two and Subject Three tests can be scheduled ten days after the previous attempt. If you fail the Subject Three safe and civilized driving knowledge test, the passing score for the road driving skills test remains valid. There are three subjects in the driver's license test: Subject One, Subject Two, and Subject Three. Subject One refers to the road traffic safety laws, regulations, and related knowledge test; Subject Two refers to the field driving skills test; Subject Three is divided into two parts: road driving skills and safe and civilized driving knowledge tests. The safe and civilized driving knowledge test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, the official term (as per the Ministry of Public Security Order No. 123) does not include the term "Subject Four."
12
4
Share

Which Gauge Shows the Urea Level in a Diesel Vehicle?

Different vehicle models have different display methods, but the following two are relatively common: Displaying urea level in the trip computer: The urea gauge symbol is somewhat similar to the fuel gauge symbol, with the addition of the word "ADBLUE" at the bottom. It is usually displayed as a percentage. No urea gauge but with a warning light: If the vehicle's urea level is sufficient, the urea warning light will not illuminate. If the urea level is low, a blue urea warning light will appear on the dashboard, reminding the driver to add urea.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.