Can the car start after water enters the exhaust pipe?

1 Answers
Teixeira
07/30/25 9:15am
Water entering the exhaust pipe can prevent the car from starting. After the car has driven through water: If water enters the exhaust pipe and the engine stalls, do not attempt to restart it forcefully. Instead, immediately call for roadside assistance and wait for help. If the water intake in the exhaust pipe is not severe: You can inspect the electronic systems yourself and remove any accumulated water under the car body. Then, remove the spark plugs to drain some water from the engine before reinstalling them. This process allows the engine to start and prevents stalling. If the car has been severely submerged in water: Roadside assistance is required to tow the vehicle to a repair shop. If water has entered the exhaust pipe, a simple cleaning and drying process is necessary before the engine can function properly again.
Was this review help?
13
0
Share
More Forum Discussions

Which is better between SL and SN engine oil?

Engine oil grades are classified into SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN levels. The later the letter in the alphabet, the higher the grade, with SN being the highest grade of engine oil currently available. Therefore, SN-grade engine oil is superior to SL-grade engine oil, and the higher the grade, the better. Here is some information about engine oil: 1. API (American Petroleum Institute) is the abbreviation for the American Petroleum Institute. The API grade represents the quality grade of engine oil. It uses a simple code to describe the working capability of engine oil. 2. Engine oil grades are classified into SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN levels. The later the letter in the alphabet, the higher the grade, with SN being the highest grade of engine oil currently available. 3. SJ is the standard from the 1990s, SL is the standard from 2001, SM is the standard from 2004, and SN is the standard from 2010.
12
1
Share

Do You Need to Release the Electronic Parking Brake When Starting?

When starting with an electronic parking brake, there is no need to manually release it. Simply shift to the drive gear and lightly press the accelerator, and the electronic parking brake will automatically disengage. The electronic parking brake will automatically activate with a simple press of the button when the vehicle is shifted into the parking gear, so there is no need to worry about the car rolling. Here is the correct method for starting with an electronic parking brake: 1. Parking: Press the brake, shift to P gear, pull the electronic parking brake once, and you can hear the sound of the brake tightening. The onboard computer will display that the electronic parking brake is activated. 2. Starting: Press the brake, shift to D gear, press the electronic parking brake once, and release the brake to start. Some cars are even simpler—the electronic parking brake automatically activates when the car stops, and pressing the accelerator when starting will automatically disengage the electronic parking brake.
8
2
Share

Does the Mercedes-Benz E300 require flushing when replacing coolant?

Replacing the coolant in a Mercedes-Benz E300 does require flushing. Coolant is a specially formulated fluid containing additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance characteristics such as freeze protection in winter, boil-over prevention in summer, and year-round anti-scaling and anti-corrosion properties. How to replace coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in all hoses, with particular attention paid to the five-way connector hose. Coolant flows through this five-way connector before being distributed to various parts of the vehicle to perform its functions. If there are any signs of coolant leakage in this area, replace the hose or resecure the connection as needed. Drain the old coolant, then flush the fluid channels with clean water. Add clean water to the coolant reservoir, then continue filling the reservoir to allow a continuous flow of water through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Continue adding clean water until the discharged water runs clear. Note: Don't forget to remove the heater hose and drain all water from the heater core. Approximately one hour after draining, add new coolant through the radiator hose. Then pour another container of coolant into the coolant reservoir until it's nearly full. Start the engine and let it run for about 10 minutes. As some air is purged from the cooling system during this process, the fluid level will drop. Add more coolant until it reaches the "MAX" mark on the reservoir.
3
4
Share

How many liters of coolant does a Mercedes C need to add?

Mercedes C needs to add 4 to 4.5L of coolant, and you can prepare 6L, storing the excess for replenishment when the coolant is depleted. Coolant is a type of cooling liquid containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year. How to replace coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way hose. The coolant is distributed to different parts of the car after flowing through the five-way hose to perform its function. If there is any leakage of coolant in this part, replace the hose or re-secure the connection as needed. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject water into the reservoir to allow it to flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out from the reservoir will be slightly pinkish. Continue adding clean water until the outflow is clear. Note: Do not forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then add another bucket of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as some air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.
11
2
Share

What is Automotive Fuel Economy?

Automotive fuel economy refers to: the ability of a vehicle to operate economically with minimal fuel consumption while maintaining performance. Key aspects of automotive fuel economy include: The main discussion points of automotive fuel economy revolve around its evaluation metrics, calculation methods for fuel economy, measurement techniques, and approaches to improve fuel efficiency. Evaluation metrics for automotive fuel economy: Maximum speed; vehicle acceleration time; maximum gradient a vehicle can climb; automotive fuel economy: its metric is measured in L/100km. The number of liters of fuel consumed per 100 kilometers driven—the lower this value, the better the fuel economy, and the more fuel-efficient the vehicle is.
2
1
Share

What specification of antifreeze does BMW use?

BMW requires antifreeze with a -40°C specification. Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance features such as preventing freezing in winter, boiling in summer, and providing year-round protection against scale and corrosion. Can different antifreeze brands be mixed: The same brand of antifreeze must be used. Different brands of antifreeze may have varying production formulas. If mixed, chemical reactions between multiple additives may occur, rendering them ineffective. How to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it illuminates, it is likely due to low antifreeze levels, though it could also be caused by excessively high cylinder temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and promptly add antifreeze. Inspect the water level scale markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. To check if antifreeze is low, observe the scale—if it is below the minimum mark, it indicates a deficiency.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.