···
Log in / Register

Can the Annual Inspection Sticker in Ningbo Be Collected by a Proxy?

2 Answers
Diego
07/29/25 10:34pm

Ningbo annual inspection stickers can be collected by a proxy. Requirements for proxy collection of the six-year inspection sticker: The vehicle owner must first visit the vehicle management office where the vehicle is registered with the following documents: ID card (of the proxy), vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax or tax exemption certificate, and motor vehicle safety technical inspection certificate. While filling out the application form, any traffic violations or accidents involving the vehicle must be resolved, and an authorization letter for issuing the inspection qualification mark must be applied for. Subsequently, both parties should bring the authorization letter, the aforementioned vehicle documents, and their ID cards to the vehicle management office in the authorized region to apply for the inspection qualification mark after the vehicle passes the inspection. Annual inspection schedule: For non-commercial vehicles such as passenger cars, new vehicles are exempt from inspection for the first six years, after which an annual inspection is required. The specific month can be referenced on the vehicle license.

Was this review help?
4
2
Share
OBlakely
08/15/25 11:33pm

Of course, you can have someone else pick it up for you! In Ningbo, it's perfectly fine to have a friend or family member collect the annual inspection sticker on your behalf. Just remember to bring the original ID of the person picking it up, a copy of the vehicle owner's ID, the vehicle registration certificate, and the annual inspection pass certificate—all these documents are essential. Last time, I had my cousin pick it up for me, and it only took about ten minutes. However, please note that Zhejiang Province has now implemented electronic annual inspection labels. You can directly apply for the electronic version through the "Traffic Management 12123" app, eliminating the need for a paper sticker and avoiding obstructing your view. So, if you find it troublesome, it’s actually more convenient to handle it online, and it’s also more eco-friendly. Before you go, I recommend calling the vehicle management office to check the latest regulations to avoid a wasted trip.

Was this review help?
16
4
Share
Expand All
More Forum Discussions

Is Engine Braking the Same as Foot Braking?

Engine braking is not the same as foot braking. The following is a detailed introduction about engine braking: 1. "Engine braking" is a driving term that refers to using the resistance generated by the engine during operation to effectively control the vehicle speed. This can be achieved through two methods: "downshifting" and "releasing the throttle." 2. Throttle Release Method: This is used on highways or national roads when the driving speed is relatively high. If you notice that the road conditions ahead require slowing down or avoiding, you can release the throttle without shifting to neutral, maintaining the transmission connection between the engine and the wheels. The decrease in engine speed will also reduce the wheel speed, achieving the effect of engine braking. 3. Downshifting Method: This involves shifting the vehicle into a lower gear when descending steep or continuous slopes to control the speed. 4. Prolonged use of the foot brake during downhill driving can cause the temperature of the brake pads and discs to rise sharply. The higher the temperature, the worse the braking effect becomes, and there is even a risk of brake failure.
16
2
Share

What is the correct starting method for an electronic gear shift car?

Here are the steps for starting an automatic transmission car: 1. Turn the ignition key to the second position, to the power-on position, for automatic detection, for at least 6 seconds or more. 2. Press the foot brake and shift the gear from P to N. 3. Release the foot brake and turn the ignition key to the start position to ignite the engine. 4. After prolonged parking, it is recommended to warm up the car for 1-2 minutes while stationary. 5. Press the foot brake, shift the gear from N to D, and release the handbrake. 6. Slowly release the foot brake to start moving. Here are the precautions to note when starting: 1. Press the brake pedal before shifting gears and check if the gear lever position is correct. 2. When starting over bumps or steps, press the brake pedal with your right foot, and while the car is stationary, slightly release the right foot and press the accelerator pedal.
15
5
Share

How Often Should Toyota Fuel Injectors Be Cleaned?

It is recommended to clean the fuel injectors once every 30,000 to 50,000 kilometers as part of routine vehicle maintenance. Fuel injector clogging typically occurs in three main areas: 1. Fuel inlet filter screen clogging: Impurities or gum deposits in gasoline can adhere to the filter screen, reducing fuel flow capacity and potentially affecting injector flow rate in severe cases. 2. Multi-point injector nozzle sealing surface: Gum deposits on the sealing surface may cause poor sealing, leading to injector leakage. 3. Nozzle orifice blockage: Fuel injectors usually have multiple nozzle orifices. While these orifices are not metering holes, clogging can affect atomization performance, and blockage of multiple orifices may also impact fuel delivery volume.
7
1
Share

What are the effects of a faulty generator tensioner pulley?

A faulty tensioner pulley can cause the engine timing to skip teeth, leading to disordered ignition and valve timing, engine shaking, difficulty in starting, and in severe cases, failure to start. After starting, it may cause the valves to deform. It is recommended to replace it as soon as possible. Symptoms of a damaged tensioner pulley include a sudden increase in engine noise during rapid acceleration (especially around 1500 RPM), engine timing skipping teeth, disordered ignition and valve timing, engine shaking, and difficulty in starting (in severe cases, the engine may not start at all). Below are some maintenance measures for the generator: 1. Monitor the wear of the bearings: If insufficient lubrication is detected, add a few drops of oil from the oil cup opening, but ensure it does not seep into the commutator, as this may affect electrical transmission. 2. If the contact surface of the brush is uneven, smooth it with fine sandpaper. If the spring elasticity is insufficient or the brush is excessively worn, replace them with new parts. If the brush is too short but not damaged, insert a shim into the bracket to ensure tight contact with the commutator. 3. Ensure the generator's dust cover is secure: Do not remove it, as it prevents dust from entering and causing mechanical faults.
18
1
Share

What is the full name of Volkswagen?

Volkswagen's full name is Volkswagen AG (German: Volks-Wagenwerk), which means 'the people's car.' The logo of the company has undergone several changes throughout its history. Here is a detailed introduction to Volkswagen: 1. Overview: Volkswagen (German: Volkswagen) is an automobile manufacturing company headquartered in Wolfsburg, Germany. It is the core enterprise of the Volkswagen Group, one of the world's four largest automobile manufacturers. In 2019, it ranked 9th in the Fortune Global 500. 'Volks' in German means 'people,' and 'Wagen' means 'car,' so the full name translates to 'the people's car,' often abbreviated as 'VW.' In Taiwan, it is translated as 'Fosu Auto,' while in Hong Kong, Macau, and Mainland China, it is referred to as 'Volkswagen' or 'Fosu Auto.' 2. Main Models: Volkswagen's lineup includes the Phaeton, Golf GTI, Passat R36, Touareg, Scirocco, Beetle, CC, Magotan, Sagitar, Golf, Lavida, Polo, Touran, Tiguan, and Passat New Lingyu, among others.
17
0
Share

Is the BMW i8 Considered a Supercar?

No, the BMW i8 is not a supercar in terms of either performance or positioning. It can only be regarded as a relatively successful model in BMW's journey toward pure electric vehicles, but its performance falls short. With a 0-100 km/h acceleration time of 4.4 seconds and a top speed of 250 km/h, it can only be classified as a coupe or GT-style luxury sports car. Here is additional information: BMW i8 Powertrain: In terms of the powertrain system, the new BMW i8 is equipped with a high-performance hybrid system, highlighting the vehicle's strong power performance. The plug-in hybrid system used in the new BMW i8 consists of two electric motors and a turbocharged gasoline engine, delivering a maximum output of 345 horsepower and a peak torque of 800 Nm.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.