Can Subject 2 and Subject 3 be Taken on the Same Day?

1 Answers
BrodyLynn
07/30/25 3:55am
Subject 2 and Subject 3 can be taken together. For a C1 driver's license, Subject 2 and Subject 3 can be scheduled consecutively for examination. According to Article 36 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": The vehicle management office shall arrange the examination according to the scheduled test site and time. After passing Subject 1, the applicant can schedule Subject 2 or Subject 3 road driving skill test. In some areas, applicants can simultaneously schedule Subject 2 and Subject 3 road driving skill tests. Once successfully scheduled, the two subjects can be taken consecutively. However, in most regions, applicants must pass one subject before scheduling the next. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skill test. For C1 and C2 vehicles, the test items include five mandatory components: reverse parking, parallel parking, hill start, right-angle turn, and curve driving. Subject 3: Subject 3 is part of the motor vehicle driver's license assessment. It refers to the road driving skill and safe driving knowledge test. Subject 2 Exam Notes: Master the steering wheel technique; Fix your seat and rearview mirror, as adjustments may change reference points; Identify reference points and find those suitable for you; Adjust direction. Subject 3 Exam Notes: Master gear shifting (upshift by sound, downshift by speed); Drive straight without deviation; Always observe and control speed at intersections, crosswalks, bus stops, and school zones; Use turn signals and check mirrors when turning (reduce speed to a controllable level, preferably to 2nd gear, before turning); Park within 30cm during parallel parking. Subject 2 Scoring Criteria: Reverse Parking: Vehicle body crosses the line: fail; Incomplete parking: fail; Stopping midway: 5 points deducted each time; Failure to complete the test within the allotted time: fail. Parallel Parking: Vehicle body crosses the line after stopping: fail; Stopping midway: 5 points deducted each time; Tires or body touch the curb: 10 points deducted; Failure to complete the test within the allotted time: fail. Curve Driving: Wheels touch the road edge line: fail; Stopping midway: fail; Not driving in 2nd gear or above: 5 points deducted. Right-Angle Turn:
Was this review help?
9
3
Share
More Forum Discussions

How is the quality of Kenda tires?

Kenda tires are of good quality. Kenda is a domestic brand of tires, commonly used for trucks and lorries. Their advantages include: 1. Providing drivers with quick and responsive handling; 2. The tires reach their operating temperature relatively quickly, allowing them to deliver excellent grip performance in a short time; 3. The longitudinal and transverse grooves of the tires are interconnected, providing outstanding wet-road grip for vehicles. Methods to identify tire quality: 1. Observe the tread pattern, color, and gloss: If the tire is of inferior quality or retreaded, the manufacturing process may be irregular, resulting in shallower tread grooves; 2. Color-wise: Inferior tires often appear overly bright, whereas standard tires tend to have a relatively darker hue; 3. The tread and sidewall joint areas: Inferior tires may have missing markings on the sidewalls, and traces of wear in the anti-slip grooves of the tread may still be visible.
9
0
Share

How Often Should the Brake Discs on a Prado Be Replaced?

Prado brake discs typically need replacement after approximately 60,000 kilometers. Below is an introduction to brake discs and their advantages: A brake disc is a circular disc that rotates as the vehicle moves. The braking force is generated when the brake caliper clamps onto the brake disc, slowing down or stopping the vehicle when the brakes are applied. The advantages of brake discs are as follows: 1. Continuous braking is less likely to cause brake fade, reducing the risk of brake failure. 2. The change in size of the brake disc due to heat does not increase the travel distance of the brake pedal. 3. Disc brake systems respond quickly, allowing for high-frequency braking actions, making them more compatible with ABS system requirements. 4. Disc brakes provide more balanced braking force between the left and right wheels. 5. The superior drainage of brake discs helps reduce poor braking performance caused by water or mud. 6. Simple in construction and easy to maintain.
18
5
Share

What does an exclamation mark on the car mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator light, lighting system fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and windshield wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a malfunction in the transmission or that the transmission fluid is below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with an exclamation mark inside parentheses. This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: An exclamation mark with a horizontal line below parentheses. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the problem. In addition, during daily use of the vehicle, the warning lights displayed on the dashboard are divided into two colors, yellow and red: Yellow indicates a fault in the corresponding system that is not very serious. Reduce speed and proceed to the nearest repair point to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional help to prevent unforeseen dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will turn on for an automatic system check and will turn off after the check is completed. If a light does not turn on when the ignition is switched on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection to eliminate potential safety hazards.
2
5
Share

How often should the Superb be serviced?

The Superb should be serviced every 10,000 kilometers, typically every six months to a year. Additional information about the Superb is as follows: 1. The Superb is one of the top models from SAIC Volkswagen Skoda. The vehicle has a relatively large body and incorporates a significant amount of new materials and processing technologies. 2. The Superb has dimensions of 4869/1865/1489mm in length, width, and height, with a wheelbase of 2841mm. 3. The new Superb is equipped with a three-spoke sporty multifunction flat-bottom steering wheel, a ten-color ambient lighting visual system, and a touch-sensitive air conditioning control panel, among other features. The newly added 10.25-inch full digital LCD instrument panel has a resolution of 1280*480 and is paired with the flat-bottom multifunction sport steering wheel. The instrument panel also changes its visual effects in sync with the color variations of the ambient lighting inside the car.
8
5
Share

Does the Toyota Levin have a manual transmission?

Toyota Levin does not have a manual transmission model. This car uses a CVT transmission, while the hybrid version uses an eCVT transmission. Here is some information about the engine and the car itself: 1. The Levin is equipped with two types of engines, one is a 1.2-liter turbocharged engine, and the other is a 1.8-liter naturally aspirated engine. The model with the 1.2T engine uses a CVT transmission. 2. The CVT transmission allows the engine to always stay within a reasonable speed range, which can improve the car's fuel economy. 3. This car is positioned as a compact car, so the front row space can meet daily needs, and the storage space is also sufficient. As for the rear row, the overall feeling is similar to the front row, with plenty of legroom.
20
2
Share

How to Use Cruise Control in Honda URV?

The method for using cruise control in Honda URV is as follows: 1. Activate the speed cruise system by sliding the switch to the "ON" position to turn on the speed control system. 2. Set the cruise speed. After the system is activated, when the car reaches the desired speed, press the "SET" button once to maintain that speed continuously. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. Upon releasing the pedal, the system will restore the car to the set cruise speed. 3. Decrease the cruise speed. Press the "SET" button once to reduce the speed by 1.5km/h; hold the button to continuously decrease the speed, and release it to store the current speed. If the "SET" button is released when the speed is below 40km/h, the stored value will be deleted. 4. Increase the cruise speed. Without pressing the accelerator pedal, press "RES" to increase the set cruise speed. Each press of the "RES" switch raises the speed by 1.5km/h.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.