Can Scratches That Expose the Primer on a Vehicle Be Repaired?

1 Answers
Eddie
07/29/25 11:22pm
Scratches that expose the primer on a vehicle can be repaired. However, it is advisable to take the car to a scratch repair shop as soon as possible to prevent rusting and corrosion of the surrounding paint. Below are detailed solutions for different types of scratches: 1. Minor Scratches: For minor scratches, polishing can restore the shine of the paint. Use a polishing wheel along with a polishing compound to remove debris and oxidation from the paint, smoothing out the fine scratches. The compound will also penetrate the paint, restoring its original luster. 2. Deeper Scratches: For deeper scratches, check if the metal surface is exposed. If not, rust is not a concern, and you can carefully apply touch-up paint using a fine brush, allowing it to dry completely. 3. Deep and Narrow Scratches: For deep, narrow scratches, colored putty can be used for effective repair. Gently sand the scratched area without enlarging it, ensuring it is clean before applying the putty. Carefully fill the scratch with putty, making sure it adheres well, then apply a finishing compound and wax. 4. Primer-Exposing Scratches: If the scratch has exposed the primer, visit a scratch repair shop immediately to prevent rust and further damage to the surrounding paint.
Was this review help?
16
4
Share
More Forum Discussions

What colors are available for the Baojun RS3?

According to the official introduction from SAIC-GM-Wuling Automobile, the new Baojun RS3 offers a total of 5 colors: Starry Blue, Starlight White, Flame Red, Silver Star, and Black Star. Information regarding car colors is as follows: 1. There are primarily two methods to modify a car's color: one is a full-body repaint, and the other is a full-body wrap. 2. A full-body repaint is the most traditional method for changing a car's color. The advantage of a full-body repaint is that the painted surface has a better finish and a more substantial texture, but it can lead to depreciation when selling the car as a used vehicle. 3. A full-body wrap is the most popular method for changing a car's color. Its advantages include the ability to change colors at any time without damaging the original paint, but the quality of wraps can vary significantly. 4. It is important to note that if you change the car's color, you must register the modification with the vehicle management office. Otherwise, the vehicle will not be legally allowed on the road and will not pass the annual inspection.
17
3
Share

How to Fold Down the Rear Seats of the T-Roc?

The method to fold down the rear seats of the T-Roc is as follows: Pull the strap on the back of the rear seat and lift the seat cushion. Here is some related information: The T-Roc is a compact SUV with body dimensions of 4318mm in length, 1819mm in width, and 1582mm in height, with a wheelbase of 2680mm and a fuel tank capacity of 51 liters. The T-Roc is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW at 5000-6000rpm and a maximum torque of 250Nm at 1750-3000rpm, paired with a 7-speed dual-clutch transmission.
2
4
Share

What does it mean when a Volkswagen detects pressure loss?

Volkswagen pressure loss indicates an issue with the tire pressure, causing the pressure sensor to detect an abnormality. The impact of tire pressure on vehicle driving is as follows: Affects driving comfort: If the tire pressure is too high, the contact area between the tire tread and the ground decreases, which affects braking performance and causes abnormal bumps during driving, reducing comfort. Additionally, tire tread wear will be abnormally concentrated in the center. Increased fuel consumption: If the tire pressure is too low, the contact area between the tire tread and the ground increases, leading to greater rolling resistance and higher fuel consumption. Moreover, tire tread wear will be abnormally concentrated on both sides, and in severe cases, it can cause standing wave phenomena in the tire, directly increasing the risk of a blowout.
2
0
Share

What Type of Fuel Does a Rolls-Royce Use?

Rolls-Royce uses 97 octane gasoline. Below are the relevant details about the Rolls-Royce Cullinan: Power: The Cullinan is a large SUV equipped with a 6.7L V12 engine featuring twin-turbocharging, delivering a maximum horsepower of 600ps and a peak torque of 900nm. Dimensions: The vehicle measures 5341mm in length, 2000mm in width, and 1837mm in height, with a wheelbase of 3295mm. It is a 5-door, 5-seat SUV with an 8-speed automatic transmission. Drivetrain: The Cullinan employs a front-engine, all-wheel-drive (AWD) system with a full-time AWD setup and a multi-plate clutch central differential.
15
3
Share

How to Open the Hood of a Golf?

Volkswagen Golf's hood release handle is located in the driver's side footwell. Pull the handle to open the hood. If the hood is deformed due to external force and cannot be opened by yourself, it needs to be sent to a repair shop for maintenance. Below are the methods to open a car hood: 1. Pull-handle type switch is located at the lower left corner of the driver's seat. Lift the handle along the arrow to release the hood, then remove the engine compartment support rod from its bracket, and finally hook the support rod into the groove of the engine compartment. 2. Button-type switch is located on the left panel of the center console. Follow these steps to open the hood: 1. Pull the hood release handle, and the hood will slightly pop up. 2. Reach into the central front part of the hood, locate the auxiliary latch handle, lift and hold the latch upwards while raising the hood. 3. After opening the hood, take out the support rod and place one end into the support slot to hold the hood open.
9
5
Share

What is the emission standard for the 2017 Excelle?

The 2017 Excelle complies with the China V emission standard. Below are methods to check a vehicle's emission standard: 1. Look at the vehicle's environmental protection label, which has clear markings on the back. 2. Check on the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center. 3. Take the motor vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. The vehicle's factory certificate contains this information, but it is usually kept at the vehicle management office. Therefore, it is recommended to make a copy when purchasing a new car for your records. 5. Make a rough judgment based on the year your vehicle was registered. Below is additional information on vehicle emission standards: 1. Vehicles before 2005 are mostly China II standard. 2. Vehicles before 2007 are mostly China II or China III standard, while those after could be China III or China IV. 3. Most vehicles after 2008 are China IV standard. 4. In 2014, there were both China IV and China V standards, with similar numbers. 5. After 2015, a small portion were China IV, while the majority were China V.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.