Can private cars be smuggled on the Hong Kong-Zhuhai-Macao Bridge?

1 Answers
LiamFitz
07/29/25 9:52am
Private cars are not allowed to pass through the Hong Kong-Zhuhai-Macao Bridge. The vehicles permitted on the bridge include five categories: cross-border buses, shuttle buses, cross-border taxis, cross-border freight vehicles, and cross-border private cars. Below is relevant information about vehicles allowed on the Hong Kong-Zhuhai-Macao Bridge: Vehicles allowed on the bridge: In addition to cross-border buses, shuttle buses, cross-border taxis, and freight vehicles, approved Guangdong-Hong Kong dual-plate vehicles from the Huanggang, Wenjindu, Shatoujiao, and Shenzhen Bay ports can directly use the bridge without additional permits. The validity period for these vehicles to use the bridge is temporarily set at two years. Important notes: Vehicles that have applied for a one-time quota and other vehicles agreed upon by Guangdong, Hong Kong, and Macao authorities can also drive on the bridge. However, vehicles with a one-time quota do not have entry privileges and must remain in the port parking lot or on the artificial island.
Was this review help?
18
1
Share
More Forum Discussions

How to turn off the ECO mode in the Prado?

Method to turn off the ECO mode in the Prado: Switch to the ECO ON interface by pressing the square button below the instrument panel brightness adjustment on the left side of the dashboard, then press and hold to deactivate the ECO mode. The ECO mode primarily affects the throttle. Whether the vehicle speed is too low or too high, as long as it exceeds the normal range, the ECO system will activate, reminding the driver to pay attention to the way they press the throttle to achieve fuel savings. The Prado is a mid-to-large-sized SUV under FAW Toyota, equipped with a 3.5L V6 engine, delivering a maximum power of 206kW and a maximum torque of 365Nm, paired with a 6-speed automatic transmission, and features a front-engine, four-wheel-drive layout.
13
1
Share

Where is the Bluetooth on the old CRV without a display screen?

In the "Bluetooth/Wi-Fi" settings interface, click on "Bluetooth Device List". Previously paired phones will automatically appear in the list. Click on the phone you want to connect to and select the connection method. This allows users to make calls through the car's audio system. The Bluetooth connection method for CRV is as follows: Turn on the Bluetooth on your smartphone; Click Settings -- Click Bluetooth -- Set the Bluetooth On/Off status to "On" Click Bluetooth Device List -- Add Bluetooth -- Device Click OK -- Select Device; At this point, a Bluetooth pairing request prompt will pop up on your smartphone, click Pair. Wait until the host screen displays that pairing is successful.
5
3
Share

Will the car move when releasing the brake in an automatic transmission?

Automatic transmission cars will move when releasing the brake. Automatic transmission vehicles typically use hydraulic transmission devices to replace the mechanical clutch of manual transmission cars, so there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to propel the car forward. When the gear lever is placed in the drive position and the brake pedal is released, as the throttle is applied and the engine speed increases, the transmitted torque grows, pushing the car forward. When the driver shifts into D gear, the engine drives the turbine to rotate, and the transmission fluid continuously impacts the turbine, allowing the drive wheels to receive this power. At this point, releasing the brake will cause the car to move forward as long as the driving force exceeds the vehicle's running resistance. Since the torque converter continuously transmits power to the transmission when the engine is running, power is transmitted as soon as the gear is engaged.
1
4
Share

What is the normal tire pressure for Tesla?

For the Model 3, the tire pressure typically ranges between 2.3 and 2.5. In addition to following the manufacturer's recommended standard tire pressure, it is also important to consider various other factors such as season, vehicle load, tire pressure environment, and road conditions. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates uneven wear on the central tread of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, leading to internal cracks, blowouts, and potential tire bursts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, posing risks to driving safety; Increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; Weakens the function of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire bursts; Increases tire deformation, making the sidewalls prone to cracks and causing flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
9
3
Share

How to reset the tire pressure light on the 2018 Golf?

The method to reset the tire pressure light on the 2018 Golf: 1. Locate the SET button marked in front of the gear lever or on its right side; 2. Turn on the vehicle's ignition, press the SET button for three seconds, and the tire pressure indicator on the dashboard will automatically turn off with a beep sound; 3. After the tire pressure light turns off, the tire pressure reset is complete. The Golf is a compact car under FAW-Volkswagen. Taking the 2018 Golf 1.6L Manual Fashion model as an example, its dimensions are 4259mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm. The body adopts a 5-door, 5-seat hatchback structure, with a fuel tank capacity of 50 liters and a curb weight of 1200kg.
4
1
Share

What is the solution when the tire pressure warning light comes on?

Tire pressure warning light comes on solutions and reasons are as follows: Abnormal tire pressure: Generally, it will trigger an alarm when the pressure is below 1.8bar or exceeds 3.0bar. The solution is to inspect the tires and adjust the pressure. Tire pressure monitoring system not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previously recorded data, causing the tire pressure warning light to illuminate. The solution is simply to perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor, which monitors the tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to come on. For sensor damage issues, the only solution is to replace it with a new component.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.