···
Log in / Register

Can modified exhaust systems be registered?

1Answers
VanMaggie
07/24/2025, 12:49:03 AM

Modified exhaust systems can be registered. Article 10 of the "Regulations on the Registration of Motor Vehicles" stipulates that for a registered motor vehicle under any of the following circumstances, the owner of the motor vehicle shall apply to the vehicle management office at the place of registration for modification registration: 1. Nature: A commercial motor vehicle is changed to a non-commercial motor vehicle or vice versa, or other changes in the nature of use. 2. Jurisdiction: The residence of the motor vehicle owner moves out of or into the jurisdiction of the vehicle management office. An application for modification registration can be made to the vehicle management office at the place of registration. For modifications specified in items (1), (2), and (3) of the first paragraph of this article, the motor vehicle owner shall apply to the vehicle management office for modification registration within ten days after the modification.

Was this review help?
108
Share
More Q&A

Should the Clutch Be Depressed When Shifting to Neutral?

Shifting to neutral requires depressing the clutch. The reasons for depressing the clutch when shifting to neutral are as follows: 1. Shifting to neutral without depressing the clutch will be more strenuous. 2. Shifting to neutral without depressing the clutch can cause excessive wear on the synchronizer inside the clutch, and may even lead to damage due to shifting impact. Additional information about the clutch is as follows: Method for adjusting the clutch on the Geely Vision X6: The pedal is connected to a threaded rod with a locking nut on top, which can be loosened for adjustment. More details about the clutch are as follows: 1. The clutch should be depressed for both acceleration and deceleration shifts. When braking at high speeds, first apply the brakes to reduce speed, then depress the clutch when the speed drops below 20 km/h. 2. The clutch functions similarly to a switch, engaging or disengaging power transmission. The clutch mechanism allows the driving and driven parts to temporarily separate and gradually engage, with the possibility of relative rotation during transmission.
112
Share

Should the Oil Level Be Checked When the Engine is Cold or Hot?

Oil level should be checked when the engine is cold. Below are the reasons for checking the oil level when the engine is cold and how to properly read the oil dipstick: Reasons: Before starting the car, especially if it has been driven by someone else, the first thing to do is to check whether there is oil in the engine; if there is no oil in the engine, starting it rashly will cause irreversible damage to the engine within two minutes, and the engine bearings will be burned out within five minutes, completely ruining the engine. How to read the oil dipstick: Park the car on level ground, turn off the engine, and wait for more than an hour. The oil clinging to the surfaces of the components will almost completely flow back into the oil pan, and the oil dipstick will then display the standard oil level for the engine.
115
Share

Should You Pull Out a Nail in Your Tire?

Tires with nails stuck in them are not recommended to be pulled out on your own. Below is an introduction to the reasons for not pulling out nails in tires and tire maintenance methods: Reasons: Because tires are in a rolling state while driving, nails may not necessarily penetrate the tire vertically. If the nail is pulled out promptly without timely repair, the tire may become irreparable. The tire must be removed from the rim and inspected by a professional tire dealer to determine if it can be repaired. Tire Maintenance Methods: Regularly clean out stones stuck in the tire treads to reduce tire exposure to sunlight; frequently check the tire pressure. The normal tire pressure values can be found on the inner side of the car's fuel tank cap—adjust accordingly based on these values; pay attention to suspension maintenance and regularly check the front wheel alignment.
116
Share

What are the common faults of Peugeot 508?

Common faults of Peugeot 508 include: the left front door speaker often not working, the speaker inside the front door not working, the right front door audio speaker not working, etc. The Peugeot 508 has a length, width, and height of 4826/1855/1465mm, with a wheelbase of 2815mm. Below is an introduction to the Peugeot 508: 1. Configuration. The high-end models of Dongfeng Peugeot 508 are equipped with features such as an electric sunroof, cruise control system, four-zone automatic air conditioning, a widescreen multimedia navigation system, Info-Drive system integrated control knob, Bluetooth hands-free phone, and 8 speakers. 2. Appearance. The Peugeot 508 draws design elements from the SR1 luxury concept car, featuring full and smooth body lines. The 508 does not adopt the previous exaggerated front face design, making its exterior design more acceptable. Additionally, this new car is the first sedan to feature Peugeot's new lion emblem. 3. Safety. Dongfeng Peugeot 508 places the safety of child passengers at an unprecedented level. The entire series comes standard with an electronic child safety lock and two rear-seat Isofix three-point fixed seat belts.
102
Share

Should You Use Cold or Warm Air to Defog Car Windows?

Both cold and warm air can be used to defog car windows, but warm air is slower than cold air in removing fog. The most effective method is to use cold air. Here are some tips to prevent car windows from fogging up: Using detergent to wipe: Mix detergent with water and use a dry cloth or sponge to evenly apply it to the car's interior glass. After it dries, wipe it clean with a car towel. This method can typically keep the windows fog-free for about 20 hours. Its purpose is essentially the same as using a specialized anti-fog spray. Installing rear window heating pipes: Most currently available car models come with a "rear window heating" function, and the button symbols are generally similar. Turning on the "rear window heating" switch can make the rear window clear in less than 3 minutes. Fogging occurs because a drop in air temperature reduces the air's ability to carry water vapor, causing excess saturated water vapor to condense into droplets.
118
Share

Do Family Cars Need to Install Static Eliminator Strips?

Generally, ordinary family cars do not need to install static eliminator strips; only special transport vehicles (such as tankers carrying flammable and explosive materials) are required to have them. Here is some related information about static elimination: Introduction to Static Eliminator Strips: These are usually installed at the rear of the vehicle and consist of a clamping part, a conductive rubber strip, and a wire connecting to the metal part of the car body. Installation simply involves fixing the clamping part to the vehicle and connecting the wire to the metal part. Static eliminator strips are the most widely used anti-static products for vehicles, and you can often see a strip-like object dragging behind a car on the street—that is the anti-static strip. Hazards of Static Electricity in Cars: While driving, an unexpected static shock can cause excessive fright, potentially leading to accidental traffic incidents. Static electricity accumulated in the human body can harm health, severely affecting metabolism. It may also lead to autonomic nervous system disorders, weakened immunity, and increased susceptibility to illnesses like colds. Particularly at gas stations, static electricity can even trigger accidents.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.