Can Mainland China Vehicles Drive on the Hong Kong-Zhuhai-Macao Bridge?

1 Answers
LePaige
07/29/25 6:24pm
Mainland China vehicles can drive on the Hong Kong-Zhuhai-Macao Bridge, but relevant documents are required. Currently, apart from Hong Kong single-plate vehicles, Guangdong-Hong Kong dual-plate vehicles, and Guangdong-Macao dual-plate vehicles, other mainland vehicles can only enter Hong Kong and Macao by applying for a one-time private car quota. Before the bridge opened, approximately 10,000 Hong Kong dual-plate private cars and 1,000 mainland private car quotas were issued. More details are as follows: 1. Currently, the Hong Kong-Zhuhai-Macao Bridge private car pass is not open to the public and is limited to cross-border corporate vehicles. However, some intermediary companies can assist in applying for the pass. 2. To travel from Zhuhai to Hong Kong, an FV license plate is required, while a Guangdong-Z license plate is needed for travel from Hong Kong to Zhuhai.
Was this review help?
2
3
Share
More Forum Discussions

How to Install Spark Plugs in the Nissan Qashqai?

The installation method for Nissan Qashqai spark plugs is: hand-tighten the spark plug first, then use a wrench to turn it an additional quarter to one-third of a turn. The spark plugs in the Qashqai should be replaced every 30,000 kilometers. The working principle of a spark plug is: it discharges the high-voltage pulse electricity delivered by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to generate an electric spark, which ignites the air-fuel mixture in the cylinder. The Nissan Qashqai is a compact 5-door, 5-seat SUV equipped with a 2.0L naturally aspirated engine and a CVT (Continuously Variable Transmission), delivering a maximum power of 111kW and a maximum torque of 194Nm. It features front-wheel drive (FWD), with a MacPherson strut independent front suspension and a multi-link independent rear suspension.
9
0
Share

What does it mean when the EPC light on the dashboard is on?

The EPC indicator light can illuminate in two states: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on after the vehicle is started, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, or brake light faults. Below is a detailed explanation of the reasons for the EPC light illuminating in other cases: Engine intake system fault: The EPC light will alert when the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt accumulation can affect intake, causing the indicator light to illuminate. Fuel system fault: Examples include substandard fuel, fuel deterioration, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with the intake valves and other powertrain components can also trigger the EPC light. ECU control unit fault: For instance, interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: Situations such as brake lights not working, faulty brake switches, or brake circuit issues. Solutions for when the EPC light comes on: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle valve, etc. Remove carbon deposits from relevant parts. Re-flash ECU-related data. If the EPC light comes on, the owner can first try turning off the engine and restarting it to check if the EPC light remains on. If it does not illuminate again, there may be no issue, possibly just the EPC light being affected. If the EPC light stays on or frequently illuminates, drive to the nearest service point for professional assistance in diagnosing and resolving the fault to eliminate safety hazards promptly. The full English name of EPC is Electronic-Power-Control, which translates directly to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined actions on the powertrain. Common EPC indicator lights generally display two colors: yellow and red. If the EPC fault light is yellow and the car can still drive normally, proceed slowly to a repair point for inspection. If the EPC fault light is red, the situation is more severe. Pull over immediately and contact a repair technician right away. Continuing to drive could directly affect the vehicle's core components or driving safety.
20
2
Share

How to Determine if There is Any Impact When the Chassis is Scratched?

Methods to determine if there is any impact when the chassis is scratched are: 1. There is an impact if there is fluid leakage or deformation of mechanical parts; 2. Minor scratches have no impact. The composition of the chassis includes: the transmission system, the running system, the steering system, and the braking system. Its functions are: 1. Anti-corrosion; 2. Anti-stone impact; 3. Shockproof; 4. Heat insulation; 5. Noise reduction; 6. Preventing bottoming out and maintaining stability. The reasons for abnormal noises in the chassis are: 1. Loose screws inside the chassis; 2. Looseness or wear at the joints of suspension link components; 3. Aging of the stabilizer bar rubber sleeve; 4. Brake system failure; 5. Loose shock absorber.
8
0
Share

How to Determine if a Car Battery Has Power?

Methods to determine if a car battery has power are: 1. Check the battery's charge indicator; 2. Measure the battery's static voltage; 3. Open the engine hood and inspect the battery's observation hole. Reasons for a car battery losing power include: 1. The car has been parked for a long time without being driven; 2. The battery has reached its specified service life; 3. The alternator is damaged; 4. Insufficient electrolyte or leakage; 5. A blown fuse; 6. Corrosion of the battery terminals. Ways to prevent a car battery from losing power are: 1. Regularly charge the battery; 2. Disconnect the negative terminal of the battery when the car is parked for an extended period; 3. Avoid multiple uninterrupted attempts to start the car.
1
4
Share

What kind of scratches can car polishing repair?

Scratches caused by car washing or road debris during driving can be repaired through car polishing. After the car surface is painted, minor defects such as coarse particles, sandpaper marks, flow marks, whitening, and orange peel may appear on the paint film surface. To address these defects, grinding and polishing are typically performed after painting to enhance the mirror-like effect of the paint film and achieve the desired brightness.
12
0
Share

How to Properly Handle a Flooded Car?

After the car is out of the water, do not start it immediately. First, observe the waterline to assess the extent of water ingress and take appropriate measures. Because after water ingress, the engine oil and brake fluid will deteriorate and lose their lubricating properties. If water has entered, replace the electrolyte. If water has entered, it can easily cause gear wear.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.