Can I undergo the review process for a driver's license with 9 points deducted on the 12123 platform?

What are the symptoms when the pulley weights of a scooter are damaged?

Scooter pulley weights that are aged or worn out will cause the engine crankshaft to fail to properly lift the belt pressure plate during rotation. After accelerating, the engine speed increases but the acceleration is too slow, resulting in weak driving performance. More information about pulley weights is as follows: 1. Introduction: Pulley weights are one of the rotating components of a scooter. The pulley weights (also called moving weights, which can move radially) are influenced by the engine speed. As the speed gradually increases, the pulley weights are subjected to outward centrifugal force that overcomes the force of the large spring, moving radially along the sliding groove toward the outer edge of the disc. This increases the force that squeezes the axial movement of the moving disc, enlarges the working radius, and reduces the diameter of the driven disc, thereby changing the transmission ratio. 2. Classification into light pulley weights and heavy pulley weights: Lighter pulley weights provide stronger acceleration, requiring less time to reach a certain speed. However, during movement, the engine speed will be higher than usual. If frequently driving in urban areas, this setup is more fuel-efficient. Heavier pulley weights result in poorer power performance during acceleration, slower acceleration, and a longer time to reach high speed. However, when the pulley weights slide to the end of the pulley disc, the inertia is greater, and the engine speed during operation becomes lower, making it more fuel-efficient during prolonged high-speed driving. The heavier the pulley weights, the greater the centrifugal force generated, which shortens the car's acceleration time. However, the instantaneous torque produced on the crankshaft can be excessive, potentially leading to crankshaft fracture in severe cases. If the pulley weights are lighter, the centrifugal force generated will be smaller, resulting in slower acceleration time for the car.

17

2

Share

How to Control Speed When Turning?

Methods for controlling speed when turning include: 1. For left turns, first activate the turn signal, and stay as close to the center of the road as possible during the turn to facilitate vehicles behind and those making right turns; 2. For right turns, first activate the turn signal, turn slowly, and be mindful of the impact of the inner wheel difference to prevent the right rear wheel from going off the road and scraping pedestrians or obstacles; 3. When turning at gate entrances or exits, pay special attention to debris piled on the roadside, slow down gradually, honk, and indicate the direction of travel with turn signals or hand gestures; 4. When turning on narrow roads, the driver should honk before starting the turn based on road conditions, reduce speed, and proceed slowly; 5. When turning on steep slopes, shift to a lower gear in advance to ensure sufficient climbing power and avoid shifting gears during the turn to prevent accidents.

11

3

Share

Which model is the Buick GL8 'Fathead Fish'?

Buick GL8 'Fathead Fish' belongs to the second-generation Buick GL8 model, equipped with a more powerful 2.0T engine with an output of 186kW, while maintaining the same exterior design as the current 25S model. The dimensions of Buick GL8 are 5256mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. The curb weight of Buick GL8 'Fathead Fish' ranges from 1880kg to 2000kg, and the fuel tank capacity is between 66 to 70 liters. The Buick GL8 family has successively launched three major series: the all-new Buick GL8 Avenir family, GL8 ES Land Baron, and GL8 Land Business Class, providing users with more diversified choices.

11

5

Share

Which brand does Acura belong to?

Acura is a premium sub-brand under the Japanese automaker Honda. Acura models include: 1. Acura MDX - a large luxury SUV; 2. Acura ZDX - a large crossover SUV; 3. Acura RDX - a compact luxury SUV; 4. Acura TSX - a midsize crossover sedan; 5. Acura RL - a full-size luxury sedan; 6. Acura TL - a mid-size luxury sedan; 7. Acura RLX - the new flagship luxury sedan; 8. Acura ILX - a compact luxury sedan; 9. Acura NSX - a high-performance supercar. The Acura ZDX is a combination of a sports car and SUV, with body dimensions of 4905mm x 1995mm x 1595mm, a wheelbase of 2750mm, and a fuel tank capacity of 80 liters.

10

5

Share

How to Replace the Steering Gear of Elysion?

The steps to replace the steering gear of Elysion are: 1. Loosen the dust cover of the steering gear input shaft; 2. Remove the clamping bolt and clamp of the steering tube; 3. Loosen the steering column, remove the front wheels and the tie rod ball joints; 4. Remove the bolts and safety washers securing the front subframe to the body, then take out the support rod; 5. Remove the bolts securing the steering oil pipe to the subframe; 6. After removing the oil pipe, take out the steering gear from the driver's side; 7. For installation, follow the reverse steps. The body dimensions of Elysion are 4935mm in length, 1845mm in width, and 1805mm in height, with a wheelbase of 2900mm. It is equipped with a 2.4-liter engine and a 5-speed automatic transmission, offering both two-wheel drive and four-wheel drive models.

4

3

Share

Where is the VIN number of the Binyue located?

The VIN number of the Binyue is located near the driver's side on the front windshield and next to the front passenger seat, marked with the VIN code. The VIN, or Vehicle Identification Number, is a unique code assigned by the manufacturer to identify a vehicle. It consists of a 17-character alphanumeric sequence, also known as the 17-digit identification code, chassis number, or 17-digit number. As the first SUV model built on the BMA architecture, the Binyue is equipped with a 1.5T three-cylinder engine, delivering a peak torque of 255Nm, paired with a 7-speed wet dual-clutch transmission. It also features advanced intelligent safety equipment and L2 autonomous driving assistance technology. The Binyue has body dimensions of 4330mm in length, 1800mm in width, and 1609mm in height, with a wheelbase of 2600mm and a fuel tank capacity of 45L.

18

3

Share

Can I undergo the review process for a driver's license with 9 points deducted on the 12123 platform?

What are the symptoms when the pulley weights of a scooter are damaged?

How to Control Speed When Turning?

Which model is the Buick GL8 'Fathead Fish'?

Which brand does Acura belong to?

How to Replace the Steering Gear of Elysion?

Where is the VIN number of the Binyue located?

What is the range of the Yudo π3 in kilometers?

Why Does Antifreeze Consume Quickly?

How to Solve the Problem of No AUX Port in a Car?

What is the tire pressure for the LaCrosse?