Can I Take the Subject 4 Test Immediately After Passing Subject 3 in Xi'an?

2 Answers
Joan
09/04/25 3:12am
You can take the Subject 4 test directly after passing Subject 3. Notes for the Subject 4 test: 1. If you fail Subject 4, you do not need to retake the previously passed subjects (Subject 1, Subject 2, Subject 3). You can schedule a retest on your own, and no retest fee is required. 2. Currently, there are no scheduling restrictions for the safety and civilized driving theory test. However, the driving skills test permit is valid for three years. If the applicant fails to complete the test within the validity period, the passed subjects will be invalidated. Subject 4, also known as the Subject 4 theory test, mainly assesses the driver's safety and civilized driving knowledge. Subject 4 separates some content from Subject 1 for independent testing, which includes the following three parts: 1. Requirements for safe and civilized driving. 2. Safe driving skills under complex conditions. 3. Emergency handling in critical situations.
Was this review help?
11
4
Share
MacVictoria
09/16/25 4:23am
I recently took my driver's license test in Xi'an. Right after passing Subject Three, I eagerly asked if I could take Subject Four immediately, and it turned out to be possible! The examiner said that once the results were uploaded to the system, they would usually be confirmed within half an hour. I scheduled Subject Four on the spot and completed the test on the same day, receiving my license. The test centers are usually located in suburban areas, so transportation is quite convenient. For revision, I used a mobile app to go through the question bank. Subject Four consists entirely of multiple-choice questions, and the safety knowledge is quite straightforward. The whole process is time-saving and effortless. I recommend preparing your ID card and study materials in advance to avoid wasting time making two trips. When going through the process, pay attention to status updates on the official platform for a high success rate. In short, Xi'an's policy supports consecutive tests, and with proper planning, you can efficiently get it done.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What brand of engine oil is suitable for the Teana?

The suitable engine oil for the Teana is the erg brand. erg engine oil offers high cost-performance, strong acceleration, and a very quiet engine. Taking the 2021 Teana as an example, it belongs to the mid-size car category with body dimensions of: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, fuel tank capacity 61.3l, and curb weight 1456kg. The 2021 Teana features a MacPherson strut front suspension and a trapezoidal control arm multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 156ps, maximum power of 115kw, maximum torque of 197nm, and is paired with a continuously variable transmission.
17
2
Share

How to Remove Cement Stains from a Car?

The methods to remove cement stains from a car are: 1. Rinse the cement stains with clean water before they harden; 2. Spray white vinegar or a specialized cement cleaner on the stains, wait for them to soften, and then rinse with clean water; 3. Pour gasoline on the stains, wait for the car paint to soften, and then rinse off the cement stains with water. Methods to maintain car paint include: 1. Wash the car only after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean any stains on the car body promptly; 4. Rinse the car with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze.
16
5
Share

How many lights remain on after a car's self-check?

After a car's self-check, 5 lights remain on. When the car is powered on, it begins the self-check process, during which all dashboard lights illuminate and then turn off sequentially. Only the battery, EPC, engine fault light, handbrake warning light, and seatbelt warning light remain illuminated. The reasons for several red lights staying on after the self-check include: 1. Leakage of vehicle oil, brake fluid, gasoline, or coolant; 2. Malfunction in the vehicle's braking system; 3. Air leakage in the air pump or air reservoir; 4. Abnormal tire pressure; 5. Loose tire fastening screws; 6. Issues with vehicle turn signals, brake indicators, lighting, windshield wipers, or horn.
10
4
Share

What Causes Heavy Car Exhaust?

Heavy car exhaust can be caused by: 1. The air-fuel mixture being too lean or too rich; 2. Failure of the catalytic converter; 3. Low fuel pressure, clogged fuel injectors, vacuum leaks, or EGR valve leaks; 4. Insufficient cylinder pressure or engine temperature being too low; 5. Air-fuel mixture leaking from the combustion chamber to the crankcase, fuel line leaks, or a damaged fuel pressure regulator; 6. A clogged three-way catalytic converter or a stuck EGR valve, preventing the engine's air-fuel ratio control and catalytic purification system from functioning properly; 7. A clogged fuel return line or a damaged fuel pressure regulator; 8. Inaccurate ignition timing, intermittent ignition misfires, or faulty temperature sensors.
19
0
Share

What are the reasons why the fog on the outside of the windshield cannot be blown away?

The reason why the fog on the outside of the windshield cannot be blown away is the temperature difference between the inside and outside of the vehicle. The temperature inside the cabin is higher than outside, causing moisture inside the cabin to condense. Solutions to remove fog from the outside of the windshield include: 1. Wiping it clean with a towel; 2. Turning on the car's heater to clear the fog; 3. Using the air conditioning's cooling and dehumidifying function to reduce air humidity; 4. Applying an automotive glass anti-fog agent. The functions of the car windshield are: 1. Protecting against wind and rain, and reducing noise; 2. Reducing wind resistance and improving airflow; 3. Ensuring the safety of passengers. Methods to maintain car glass include: 1. Using dedicated or suitable wiper blades and replacing them promptly; 2. Keeping the windshield clean; 3. Using automotive-specific glass cleaner.
16
3
Share

How to Reset the Sunroof on a Sagitar?

The method to reset the sunroof on a Sagitar is as follows: 1. Press the initialization button for 10 seconds until the sunroof moves to the tilt position; 2. Once the sunroof stops moving, release the button; 3. Within 6 seconds, press and hold the initialization button again until the sunroof is completely closed; 4. Release the button to complete the reset. Taking the 2018 Sagitar as an example, it is a compact car with body dimensions of: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, and a fuel tank capacity of 50 liters. The 2018 Sagitar features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, and maximum torque of 175Nm, paired with a 5-speed manual transmission.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.