Can I still renew my driver's license if it has been expired for 3 months?

2 Answers
ZoeFitz
07/24/25 5:33pm
You can normally renew your driver's license even if it has been expired for 3 months. The renewal process is the same as the standard procedure. The motor vehicle driver should submit the required materials to the vehicle management office where the driver's license was originally issued. The vehicle management office will process the renewal within one working day after approval. In addition to applying for renewal at the vehicle management office, you can also apply for renewal through the following methods: Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the information. The new license is usually delivered by mail. Visit the "Police-Medical-Post" service point at a postal business hall to process the renewal. The entire process, from registration to medical examination and new license production, takes only half an hour. Currently, only a few cities have opened this service, such as Hangzhou.
Was this review help?
18
0
Share
OAshlyn
08/11/25 9:39am
I just realized my driver's license had been expired for over two months, but it's completely fine to renew it now. According to traffic regulations, licenses can be normally renewed within one year of expiration. Only after exceeding one year do you need to retake the written test. Yours is just three months overdue—no problem at all. Quickly gather your original ID card, old driver's license, and three white-background ID photos, then head to the DMV. Remember to get a medical check-up at a hospital first and obtain the report—nowadays, these reports are uploaded online. Last time I renewed mine, it only took half an hour, though queuing took some time. Oh, and definitely don’t drive there—getting caught with an expired license counts as driving without a license, which could lead to your car being impounded and a fine. It’s best to make an appointment beforehand to avoid a wasted trip.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on a Volkswagen?

Volkswagen maintenance light reset method is: 1. Turn the ignition key to the 'on' position with your right hand; 2. Press and hold the reset button on the right side with your left hand; 3. Turn off the ignition key, wait until the instrument panel screen goes completely black, then turn the key to the 'on' position again; 4. Keep holding the button until the maintenance reminder disappears automatically. Volkswagen models include: Volkswagen Lavida, Volkswagen Bora, Volkswagen Teramont, Volkswagen Lamando, Volkswagen Tacqua, etc. Taking the 2021 Volkswagen Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm. The 2021 Volkswagen Lavida is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm.
20
3
Share

What are the solutions for unpleasant odors in car air conditioning?

The solutions for unpleasant odors in car air conditioning are: 1. Open the windows for ventilation; 2. Turn on the internal circulation; 3. Place activated charcoal in the car; 4. Install an air purifier in the car; 5. Turn on the external circulation of the air conditioning; 6. Place some grapefruit or orange peels in the car to use the fruit fragrance to counteract the odor; 7. Replace the air conditioning filter. The maintenance methods for air conditioning are: 1. Clean the air conditioning vents promptly; 2. Maintain the air conditioning condenser in a timely manner; 3. Clean or replace the air conditioning filter promptly. The functions of air conditioning are: 1. Filter the air entering the cabin; 2. Absorb moisture from the air; 3. Keep the air clean and prevent bacterial growth; 4. Prevent fogging on the glass; 5. Adjust the cabin temperature.
18
2
Share

Why Does a Sedan Emit a Gasoline Smell When Starting?

The reasons for a gasoline smell when starting a sedan are: 1. Incomplete combustion during startup; 2. Aging rubber hoses in the engine compartment, leading to leaks; 3. Insufficient air intake by the throttle, causing incorrect air flow information, affecting fuel injection quantity, resulting in increased fuel consumption and a gasoline smell; 4. Poor sealing or uncleaned residues after disassembling and reassembling the fuel pump; 5. Leaks in the gasoline carbon canister or fuel pump rubber ring. Solutions to address the gasoline smell when starting a sedan include: 1. Replace the throttle; 2. Replace the carbon canister or carbon canister solenoid valve; 3. Clean the engine interior; 4. Replace the fuel injector; 5. Open the solenoid valve; 6. Replace the carbon canister rubber hose.
2
2
Share

What Causes a Car's Fuel Pump to Fail to Deliver Fuel and Prevent Starting?

Car out of fuel; Faulty crankshaft position sensor; Starter issues; Dead battery; Excessive carbon buildup. Below are the relevant details: 1. Car out of fuel: If the vehicle has very little fuel or the fuel gauge shows below the red line, it naturally won't start. When discovering the car won't start, the first thing to check is the fuel gauge to see if there's any fuel left. Additionally, never wait until the tank is empty to refuel, as this not only affects the engine's lifespan but also the fuel pump's longevity. Operating the fuel pump without fuel can even be dangerous. 2. Faulty crankshaft position sensor: The crankshaft position sensor is the most critical sensor in fuel-injected engines, especially in centralized control systems, and is shared by both the ignition and fuel injection systems. Its function is to monitor the crankshaft's position, allowing the engine's computer to detect speed signals. If the crankshaft position sensor fails, the computer can't detect speed signals, making it unable to determine if ignition is occurring, thus preventing the car from starting. 3. Starter: If the car encounters these issues, it's advisable to check for starter malfunctions. 4. Dead battery: A car's battery can die due to prolonged inactivity, the battery's lifespan expiring, a faulty alternator, insufficient or leaking electrolyte, blown fuses, corroded battery terminals, or overuse of the battery. Additionally, installing xenon headlights, high-power audio systems, or DVDs can also cause vehicle circuit failures. Checking for a dead battery is simple—press the horn to find out. 5. Excessive carbon buildup: Too much carbon buildup can lead to poor spark plug ignition, leaky valves, and inefficient fuel injector operation, causing the car to misfire, accelerate poorly, shake, or in severe cases, fail to start. Excessive carbon in the throttle body can block airflow, preventing the engine from starting due to lack of air. If the car won't start because of throttle body carbon buildup, try pressing the accelerator slightly—it might help the engine start smoothly.
1
4
Share

What is the reason for the yellow exclamation mark on the dashboard?

The reasons for the yellow exclamation mark on the dashboard are: 1. Fault in the ground adhesion control system; 2. Excessive tire pressure or tire leakage; 3. Driving with low tire pressure for an extended period; 4. Fault in the tire pressure sensor; 5. Damage to the automatic transmission. The methods to remove the yellow exclamation mark on the dashboard are: 1. Turn off the traction control system; 2. Repair the traction control system; 3. Adjust the tire pressure; 4. Replace the tire; 5. Inspect and repair the automatic transmission. The hazards of the yellow exclamation mark displayed on the dashboard are: 1. Increased road friction coefficient, leading to elevated tire temperature and potential tire blowout; 2. Heavy steering wheel, compromising driving safety; 3. Damage to the tire bead.
3
2
Share

What character does Hubei license plate start with?

Hubei license plates start with the character 'E'. The license plate codes for various regions in Hubei Province are as follows: E·A for Wuhan City, E·B for Huangshi City, E·C for Shiyan City, E·D for Jingzhou City, E·E for Yichang City, E·F for Xiangfan City, E·G for Ezhou City, E·H for Jingmen City, E·J for Huanggang City, E·K for Xiaogan City, E·L for Xianning City, E·M for Xiantao City, E·N for Qianjiang City, E·P for Shennongjia Forestry District, E·Q for Enshi Tujia and Miao Autonomous Prefecture. The functions of license plates are: 1. Identification mark of the vehicle; 2. Indicates the region to which the vehicle belongs; 3. The vehicle owner and registration information can be traced based on the license plate.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.