Can I Handle 2 Out of 3 Traffic Violations First?

1 Answers
DelHarmony
07/29/25 11:48pm
You can handle two out of three traffic violations, whether processed at the traffic police station/branch or through the "Traffic Management 12123" app. Each violation must be processed one by one. If you don't have enough points on your license, you can either find someone else to handle it with their license or wait until the next year (though you may need to pay additional late fees). Below is relevant information about handling traffic violations: 1. Documents required for processing violations at the vehicle management office: original vehicle license of the violating vehicle, original ID of the point-deducted driver, and original driver's license of the point-deducted driver. With these three documents ready, the driver can personally go to the vehicle management office or traffic police station service hall to take a number and queue for processing. 2. Processing time: According to traffic laws, after a vehicle violation occurs, it usually takes 3-7 days to be queried online or receive an SMS notification, with a maximum delay of 13 working days. The vehicle owner must go to the local traffic police station to handle the violation within 15 days after it occurs.
Was this review help?
11
3
Share
More Forum Discussions

Where is the Roewe i5 engine manufactured?

The engine of the Roewe i5 is domestically produced, manufactured at SAIC Motor's engine production base. Below is relevant information about the Roewe i5: 1. The i5 is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.5-liter turbocharged engine has a maximum power of 124 kW, a maximum torque of 250 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1700 to 4300 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. The 1.5-liter naturally aspirated engine has a maximum power of 88 kW, a maximum torque of 150 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4500 rpm. This engine is equipped with DVVT technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT transmission.
17
1
Share

How to Deal with Water Accumulation Inside the Car?

Water accumulation inside the car can be handled by laying rubber floor mats, drying with a cloth, or using specialized cleaning agents. Here are the specific methods: 1. Lay a rubber floor mat on the car floor: If there is a layer of rubber floor mat on the car floor, the water will accumulate on the mat instead of soaking into the car floor or the built-in fabric, thus preventing damage to the car. Simply remove the rubber mat, dry it, or wash it. 2. Use a cloth to wipe the water off the car floor: When water accumulation is noticed inside the car, promptly use a cloth to wipe the water off the floor. The method involves soaking a dry cloth in water, wringing it out, soaking it again, and repeating the process until the area is dry. 3. Use specialized automotive foam cleaner: If liquids like water or milk spill onto the car's fabric floor, they may leave stains or marks. In such cases, lift the floor mat and spray a specialized automotive foam cleaner onto the fabric surface, then gently wipe with a cloth to clean it.
19
4
Share

Why does the car make a humming noise at low speeds?

The reasons for a car making a humming noise at low speeds are as follows: 1. Engine noise: The noise from the vehicle's engine varies with different engine speeds. 2. Road noise: Road noise occurs when the vehicle is moving at high speeds, caused by wind cutting in and creating noise, as well as vibrations from the chassis being driven. Additionally, gravel and sand hitting the car's chassis can also produce noise. 3. Tire noise: Tire noise is generated when the vehicle is moving at high speeds due to friction between the tires and the road surface. The level of tire noise depends on road and vehicle conditions; worse road conditions lead to louder tire noise. Moreover, there is a significant difference in tire noise between asphalt and concrete roads. 4. Wind noise: Wind noise refers to the pressure of oncoming wind exceeding the sealing resistance of the car doors and entering the cabin when the car is moving at high speeds. The faster the speed, the louder the wind noise. 5. Resonance noise and others: The car body itself acts like a box, and sound has the properties of refraction and overlapping. When sound enters the cabin, without sound-absorbing and sound-insulating materials to absorb and block it, the noise will continuously refract and overlap, forming resonance noise.
4
3
Share

Should the Air Conditioning Be Turned Off When the Car Is Turned Off?

It is necessary to turn off the air conditioning when the car is turned off. Below are some related additional information: 1. Disadvantages of not turning off the air conditioning: When the vehicle is started next time, the engine will start with the load of the air conditioning, and such a high load can damage the engine. After parking, the evaporator for cooling will adsorb many small water droplets on its surface. If left unattended, bacteria will breed inside the evaporator over time, and a musty odor will be produced. 2. Maintenance of car air conditioning: Regularly clean and replace the air conditioning filter, as the air conditioning filter is an air filtration device that can filter out dust particles, harmful particles, and other dirt from the air before it enters the cabin. However, after prolonged use, the filter will become clogged with these particles, gradually affecting the cooling efficiency of the air conditioning and increasing fuel consumption. Regularly clean the radiator and condenser, as the radiator and condenser are located in the engine compartment at the front of the car and are used for heat dissipation. Over time, they can also become dirty, affecting the cooling efficiency of the air conditioning and increasing fuel consumption. Therefore, these two areas, as well as the engine compartment, should be cleaned before the summer season begins.
7
1
Share

How to Remove the Turn Signal Light on the Rearview Mirror of MG ZS?

Use a flat-head screwdriver to pry open the edge of the turn signal light on the rearview mirror, creating a small gap. Then, remove the other screw securing the turn signal light below, separating the turn signal from the rearview mirror base to finally remove it. The detailed steps are as follows: 1. Prepare all the tools needed for the entire process of removing the rearview mirror turn signal light. Use a flat-head screwdriver to pry open the gap between the rearview mirror housing and the base. Once partially pried open, gently pull the mirror housing upward to remove it. 2. Use a larger flat-head screwdriver to carefully pry open these clips, then gently pull the rearview mirror lens to separate it from the base. After removing the rearview mirror lens, you will see the screw securing the turn signal light. Use a T-10 spline to remove this screw, then remove the other screw securing the turn signal light. Keep the removed screws safely stored. 3. Remove the rearview mirror turn signal light, which is now separated from the rearview mirror base. Disconnect the wiring harness plug to completely remove the turn signal light.
9
4
Share

How to Check If You Have Any Vehicles Under Your Name?

You cannot check vehicle license plate numbers online using your ID card and name. You need to bring your ID card to the local vehicle management office for inquiry. Below is a detailed introduction on how to check vehicle information under your name: 1. Personal Vehicles: Provide the original and a copy of the vehicle owner's identity proof. 2. Company Vehicles: Provide the original and a copy of the company's organization code certificate, a power of attorney from the legal representative, and the original and a copy of the handler's ID card. 3. Required Documents: Original and a copy of the vehicle registration certificate. 4. Inspection and Law Enforcement Agencies: Present a company letter of introduction (specifying the inquiry requirements, handler's name, work ID number, etc.), the original and a copy of the handler's work ID to inquire about vehicle information. 5. Lawyers: Present the court's case acceptance notice, a company letter of introduction, and the original and a copy of the lawyer's license.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.