···
Log in / Register

Can I Get Off and Leave Directly After Passing the Driving Test Subject 3?

4 Answers
LincolnFitz
09/03/25 2:52am

You can get off and leave directly after passing the Subject 3 test. Here are the precautions for the Subject 3 road test: 1. Fingerprint: If the candidate's fingerprint verification fails, please get off the vehicle to re-collect the fingerprint before queuing again for the test. 2. Score: If the candidate's score falls below the passing score during the test, the system will automatically prompt the candidate to pull over. After completing the pull-over action, the system will prompt for the next test. 3. Distance: After the candidate completes all required test items and drives a distance of more than 3 kilometers as required, the system will automatically prompt to pull over. Upon hearing the pull-over voice prompt, the candidate should choose a clear curb (or solid road edge line) on the test route and complete the pull-over action after confirming safety. After completing the pull-over, the system will announce the test result via voice.

Was this review help?
6
4
Share
JoelLynn
09/15/25 4:36am

I remember when I took the driving test (Subject 3) for the first time, I was so nervous that my palms were sweating. As soon as it ended, I wanted to rush out of the car for some fresh air. However, the examiner stopped me and reminded me that I needed to follow the proper procedures after the test and couldn't just leave immediately. Before the test officially ends, the vehicle must come to a complete stop, the handbrake must be firmly engaged, all lights must be turned off, and only after ensuring everything is safe can you unbuckle your seatbelt. Then, you need to wait for the examiner to announce your results, often requiring you to sign a form or receive a test sheet for confirmation. Leaving directly might result in your score not being recorded, making all your efforts in vain, and could also pose safety risks, such as the car rolling if not properly parked or accidentally entering the test route. Passing Subject 3 means preparing for the Subject 4 written test, and knowing your results is the first step. Developing the habit of patiently waiting not only ensures a smooth test process but also makes daily driving much safer, as safety is always more important than saving time.

Was this review help?
4
3
Share
Expand All
LeGianna
10/29/25 5:14am

As a coach who frequently trains beginners, I always emphasize: never jump out of the car immediately after the third driving test—this is a common misconception. The exam rules require candidates to park the vehicle properly, engage the handbrake, turn off the lights, and wait for the examiner's instructions before unbuckling the seatbelt and exiting. Rushing to leave may result in the examiner not having enough time to record your score, which could lead to the score not being entered into the system, forcing you to retake the test. More importantly, failing to control parking details properly may cause accidents, such as losing control of the vehicle or hitting obstacles. Stay calm after the test, communicate with the examiner about the next steps, and you’ll usually know your result on the spot. Then, you can fully focus on preparing for the fourth test. Developing these small habits will make your driving career smoother.

Was this review help?
11
2
Share
Expand All
MacJoel
12/12/25 5:25am

From the perspective of examination management, candidates must follow the standard procedure after completing Subject 3: Park the vehicle in the designated spot, confirm the handbrake is engaged and lights are turned off, then remain seated to await the examiner's announcement of results and instructions. The examiner typically needs to review driving records or complete scoring before allowing the candidate to exit the vehicle and sign to finalize the process. If you exit the vehicle directly, the examination will be considered incomplete, results invalid, and may even constitute a violation of examination discipline. Examination grounds have high vehicle traffic, and hastily exiting can easily lead to accidental collisions or disrupt other candidates. It is recommended that candidates take a deep breath after the test, patiently remain seated for a few minutes, and wait for the examiner's arrangements—this approach is both safe and efficient, avoiding unnecessary complications.

Was this review help?
12
1
Share
Expand All
More Forum Discussions

Can Tesla add a phone key?

Tesla can add a phone key. Here are the relevant methods: Adding a remote key: When adding a remote key, ensure the remote key is at room temperature. If the remote key is too cold, pairing may not be successful. Method: On the touchscreen, tap "Controls > Locks", then tap the "+" in the "Keys" section, and scan the new card key or remote key on the key reader located behind the cup holder on the top of the center console. Once the new card key or remote key is recognized, remove it from the key reader. Note: When the mobile app notifies you of successful pairing, tap "Done". To add a new phone key, Bluetooth must be enabled, and the phone must have the Tesla mobile app installed and be connected to the vehicle's Tesla account.
18
5
Share

How long can a Magotan drive with a faulty exhaust valve?

If the exhaust valve of a Magotan malfunctions, it is not recommended to continue driving, and immediate replacement is advised. Although the car can still operate normally with a faulty exhaust valve, the following issues may arise: 1. Increased oil consumption. 2. Severe piston carbon buildup. 3. A large amount of oil entering the cylinder, leading to engine seizure. 4. The turbocharger may fail to engage, resulting in poor acceleration. While the vehicle can still function, it will consume more oil. This can lead to reduced oil levels and severe piston carbon deposits. Insufficient oil means the engine lacks proper lubrication, accelerating wear and shortening its lifespan. If left unrepaired, severe cases may see excessive oil entering the cylinder. Since liquids are incompressible, the piston and cylinder can be damaged, causing engine seizure. A faulty exhaust valve may also prevent the turbocharger from engaging, leading to weak acceleration.
4
3
Share

What are the causes of high idle speed in Wuling Rongguang?

Wuling Rongguang high idle speed causes are as follows: Throttle failure: Leads to excessive air intake, check if the throttle plate is stuck by foreign objects and clean the throttle body, check if the throttle cable is rusted or stuck, check if the idle air control valve passage is normal. Intake manifold causing air leaks: Check if the intake manifold is damaged, check if the fuel injector sealing rings are intact, retrieve data streams from various sensors, most importantly check if the intake pressure is normal. Other conditions: When engine coolant temperature is low, air conditioning is on, or engine voltage is low, the ECU programming will appropriately increase idle speed - this is normal. If the engine coolant temperature is normal, air conditioning is off, yet idle speed remains high, this indicates a system malfunction which could be either electronic control system or mechanical system failure.
11
2
Share

How many cylinders does the Geely Icon have?

Geely Icon has three cylinders. The Geely ICON is equipped with a Zhiqing 1.5TD mid-mounted direct-injection turbocharged engine and a 7-speed wet dual-clutch transmission, paired with 48V BSG mild hybrid technology. It features front MacPherson and rear multi-link independent suspension, with two chassis tuning options: sport and comfort. It excels in two main aspects: 1. Intelligent safety features. It includes 540° all-terrain imaging technology, a new-generation APA fully automatic parking system, ICC intelligent navigation system, ACC adaptive cruise control, AEB city pre-collision system, LKA lane-keeping assist system, 360° driving recorder, and BSD blind spot monitoring. 2. Comfort features. The Geely ICON comes with fully automatic climate control, PM2.5 air purification system, leather multifunction steering wheel, premium leather seats, and front seat heating. The center console features two 10.25-inch full-color LCD screens, integrating multimedia information, speed, navigation, and more.
14
5
Share

The Differences Between Lavida and Bora

The differences between Lavida and Bora are mainly reflected in five aspects, which are: First aspect: Appearance. The Lavida appears very stable, while the Bora's front face design is more aggressive. Second aspect: Interior. The Bora's design is more textured, while the Lavida's design is more conventional. Third aspect: Body dimensions. The Lavida is 4670 mm in length, 1806 mm in width, 1474 mm in height, and has a wheelbase of 2688 mm. Fourth aspect: Side design. The Lavida's waistline design is not very obvious, while the new Volkswagen Bora's waistline extends from the headlights to the taillights, making it more noticeable. Additionally, a silver chrome waistline is equipped below the doors. Fifth aspect: Rear styling. The Lavida's rear design is more rounded, with two small-sized brake lights below the taillights. The new Volkswagen Bora's taillight design is more three-dimensional, and the rear design adopts a folded style, giving it a more sporty feel.
2
1
Share

What is the reason for the Skoda ASROFF light being on and the car not starting?

SAIC-GM Skoda Octavia cannot start, the dashboard lights are off, and the ASR light is on, indicating an electronic throttle system fault. It is necessary to perform an initialization reset of the Skoda Octavia's electronic throttle system. Below are the specific operation steps: Power on: Press the brake pedal of the SAIC-GM Skoda Octavia, prepare to power on the engine, release the handbrake, press the one-touch start button of the SAIC-GM Skoda Octavia, and wait for all the dashboard lights of the SAIC-GM Skoda Octavia to illuminate, indicating that the engine has been powered on. Initialization reset: Press the top of the lever located on the right side of the steering wheel of the SAIC-GM Skoda Octavia, hold it down without releasing, and continue holding for more than 5 seconds. The initialization reset of the Skoda Octavia's electronic throttle system will then be completed.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.