Can I get my car inspected during the October holiday?

2 Answers
McMiguel
07/28/25 10:16pm
You cannot get your car inspected during the October holiday. Statutory holidays: Because the National Day is a statutory holiday, the vehicle management office will also be closed. Although there may be staff on duty, they will not handle business. After all, these seven days of statutory holidays are what everyone looks forward to, and car inspections are generally not conducted during this time. Working hours: The working hours of vehicle management offices vary in different regions. Some are from 8:30 to 18:00, while others are from 9:00 to 19:00, and the working days are from Monday to Friday. However, not all offices follow this schedule. Some offices are open from Saturday to Sunday, with longer working hours.
Was this review help?
5
2
Share
LaReagan
08/12/25 2:48am
I recently dealt with my vehicle inspection, coincidentally right before last year's National Day holiday. Both the DMV and inspection stations were mostly closed during the holiday, as the staff needed time off. I initially thought of getting it done during the break, but ended up making a wasted trip. Later I learned that these institutions generally don't operate on statutory holidays. If your annual inspection happens to fall in October, it's best to get it done a month early - the queues in late September are extremely long. If you really can't make it, quickly schedule an appointment after the holiday. Nowadays you can check inspection station opening hours on your phone - some private stations might open during adjusted working days, but it's best to call ahead to confirm and avoid unnecessary trips. Remember to bring your ID card, vehicle license, and compulsory insurance documents to save yourself multiple trips.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What does SN grade engine oil mean?

SN grade engine oil represents a high-quality oil classification. Engine oil grades include: SG, SJ, SL, SM. Its functions are: 1. Reducing friction and high temperatures; 2. Cooling and temperature reduction; 3. Cleaning and purifying; 4. Shock absorption and cushioning; 5. Rust and corrosion prevention. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance. The method for changing car engine oil is: 1. Use a jack to lift the vehicle, locate and loosen the drain plug to release the oil; 2. Remove the oil filter and place a container beneath it; 3. Install a new oil filter and add new engine oil.
3
1
Share

How to Drive an Automatic Transmission Car Uphill?

Automatic transmission uphill driving steps are: 1. When starting a cold engine, the engine speed is usually above 1000 rpm. Press the brake with your right foot and release the handbrake with your right hand; 2. Shift the gear from P to D; 3. On very steep slopes, quickly release the brake and apply the throttle slightly more than usual. Automatic transmission gear positions include: 1. D gear refers to Drive (forward gear); 2. R gear refers to Reverse; 3. P gear refers to Park; 4. L gear refers to Low gear; 5. N gear refers to Neutral; 6. W gear refers to Winter/Snow mode; 7. S gear refers to Sport mode. An automatic transmission allows the car to automatically shift between different gears based on engine load and driving conditions while the driver operates the accelerator pedal as needed during driving.
16
2
Share

How to Operate the Alternation Between High Beam and Low Beam?

The operation method for alternating between high beam and low beam is: 1. Use your thumb and index finger to grasp the lever located at the lower left side of the steering wheel; 2. Pull it backward once; 3. Pull it in the opposite direction once to complete the alternation between high and low beams. Precautions for using car lights include: 1. Turn on the low beam when driving at night; 2. Do not use the high beam when a following vehicle is driving closely behind a leading vehicle in the same direction; 3. When passing through sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic signal control at night, you should alternate between high and low beams to signal. The function of the high beam is to check the road conditions in the distance, while the function of the low beam is to clearly see the road conditions in front of the vehicle.
9
1
Share

How to Remove the Driver's Airbag in an Audi S5?

The method for removing the driver's airbag in an Audi S5 is as follows: 1. Open the rear cover of the steering wheel; 2. Locate the internal fixing screws; 3. Use tools to remove the fixing screws; 4. Pull the airbag outward with force, disconnect the wiring harness plug, and the removal is complete. Taking the Audi S5 2020 Sportback as an example, its body dimensions are: length 4762 mm, width 1843 mm, height 1342 mm, with a wheelbase of 2831 mm. The Audi S5 2020 Sportback is equipped with a 3.0T turbocharged V6 engine, with a maximum power of 260 kW and a maximum power speed of 5400 to 6400 rpm, paired with an 8-speed automatic manual transmission.
17
5
Share

How to Remove the Maintenance Reminder on the Haval H6 Dashboard?

Haval H6 maintenance reminder elimination method: Turn off the key, press and hold the button at the lower right of the dashboard; turn the key to the position where all dashboard lights are on, and release the button after the small wrench icon on the dashboard stops flashing; press the button at the lower left of the dashboard, and the small wrench will disappear, thus eliminating the maintenance reminder. Relevant information about the Haval H6 is as follows: 1. The Haval H6's body dimensions are: length 4653mm, width 1886mm, height 1730mm, with a wheelbase of 2738mm. 2. The Haval H6 features a MacPherson strut front suspension and a multi-link independent rear suspension, equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, maximum power of 155kW, maximum torque of 325Nm, paired with a 7-speed dual-clutch transmission.
15
2
Share

What Does Blind Spot Monitoring Mean?

Blind spot monitoring refers to the installation of a camera on the right side mirror, which displays the image of vehicles located in the blind spot area on the screen. The functions of blind spot monitoring are: 1. Reduce the visual blind spots of the side mirrors; 2. Assist in expanding the field of vision; 3. When preparing to change lanes, it can confirm a wider rear view; 4. Provide more practical safety protection for everyone inside and outside the vehicle. The installation steps for blind spot monitoring are: 1. Connect the wiring and determine the installation position of the camera on the side mirror; 2. Wipe off the dust under the side mirror with a towel, peel off the adhesive tape of the camera, and stick it directly in place; 3. Guide the wire back into the car through the door gap, secure it along the edge with tubing and clips, and coil the wire neatly under the seat; 4. Plug in the cigarette lighter charger, connect the screen, and turn on the cigarette lighter switch.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.