Can I choose my own license plate number at the dealership?

1 Answers
OZane
07/30/25 12:45am
At the dealership, you can choose your own license plate number. Things to note when getting a license plate: When getting a license plate, it is best to purchase sufficient insurance coverage to prevent any unexpected situations. If the official license plate has not been installed, it is advisable to carry a temporary license plate when driving. If you want to process the license plate quickly, you can go to the corresponding barcode recognition at the vehicle management office to select a plate number, which allows you to receive the license plate on the spot. For domestically produced cars, you may be eligible for exemption from inspection, but for imported cars, the procedures might be more complicated. License plate registration process: Go to the national tax window at the vehicle management office to pay the purchase tax and obtain the original and duplicate copies of the purchase tax certificate. Bring your ID card and a copy, the original vehicle qualification certificate and a copy, the third copy of the car purchase invoice, the original tax payment slip, and the tax declaration form. At the environmental protection window, apply for the environmental protection qualification certificate, which requires the qualification certificate, ID card and a copy, and a copy of the invoice. For vehicle external inspection, collect the external inspection form in the external inspection area and find a specialist to take photos.
Was this review help?
18
4
Share
More Forum Discussions

How often should iridium-platinum spark plugs be replaced?

Iridium-platinum spark plugs should be replaced after running 80,000-100,000 kilometers. Under normal maintenance conditions, automotive spark plugs should be replaced after 40,000 to 60,000 kilometers of driving. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000-80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, and then secure the cover plate.
4
0
Share

Is GAC Trumpchi Toyota Technology?

GAC Trumpchi is an independent automotive brand that utilizes its own production technology and does not employ Toyota's production methods. Below is an introduction to the brand: 1. As a domestic independent automotive brand, it holds a certain position in the Chinese market. Domestically, it adheres to entering from the mid-to-high end segment while also pursuing an international path to enhance the reputation and product strength of GAC Trumpchi vehicles. 2. GAC Trumpchi has launched multiple vehicle models, among which the GS4 is a representative model with good reputation and sales performance in China.
17
3
Share

Is the Fista's exhaust sound loud?

The Fista's exhaust sound is not loud in normal mode. For this car, its exhaust sound is judged based on the engine's RPM. Generally, the higher the engine RPM, the louder the sound will be. Therefore, the exhaust sound is not loud in normal mode, but it is louder in sport mode. Below is an introduction to the model: The Fista LAFESTA is a new compact sedan under Hyundai, with an official guide price ranging from 119,800 to 154,800 RMB. Positioned as a compact car, it offers three powertrain options (1.4T and 1.6T high/low power) across five trim levels. The Hyundai Fista is equipped with a 1.4T and 1.6T high/low power engine. The 1.4T engine delivers a maximum power of 103kW (140PS) and a peak torque of 240N·m. The 1.6T low-power engine produces a maximum power of 140kW (190PS) and a peak torque of 265N·m, while the 1.6T high-power engine offers a maximum power of 150kW (204PS) with the same peak torque of 265N·m, paired with a 7-speed dual-clutch transmission. The 1.6T high-power version achieves an official 0-100km/h acceleration time of just 7.6 seconds. For suspension, it features a front MacPherson strut independent suspension and a rear multi-link independent suspension.
16
0
Share

Is Wheel Balancing Unnecessary for Rear Tires?

Replacing or repairing rear tires alters their mass distribution, necessitating wheel balancing. If the rear tires' mass remains unchanged, balancing is not required. Tires with altered mass distribution do need balancing. Wheel balancing refers to the process where a vehicle's wheel (comprising tire and rim as an integrated unit) is adjusted for uneven mass distribution caused by manufacturing variances. At high speeds, this imbalance manifests as wheel wobble and steering wheel vibration. Hazards of unbalanced wheels: 1. Rhythmic tire hopping during driving causes steering wheel vibration. 2. Vehicle resonance occurs within specific speed ranges. 3. Chronic imbalance leads to irregular tire wear, compromising both tire longevity and driving safety. 4. Severe cases may adversely affect suspension systems and bearings.
12
3
Share

What Causes Clutch Vibration?

The causes of clutch vibration are: deformation of the clutch disc; damage to the clutch release cylinder; resonance caused by incomplete clutch pedal engagement. To address this, engage first gear, lightly press the accelerator, and slowly release the clutch. The shaking phenomenon when starting the car is mainly due to uneven contact surfaces between the pressure plate, driven disc friction surface, and flywheel contact surface, causing vibration when operating the clutch. Possible reasons include uneven pressure distribution in the clutch assembly, loose or broken springs, incorrect pressure positioning, leading to clutch instability. Alternatively, excessive tension in the clutch pressure springs may cause shuddering. Severe wear on the clutch spline hub or bending of the transmission input shaft can also induce clutch vibration.
9
0
Share

Is Polishing Necessary After Car Paint Touch-Up?

Polishing is necessary after car paint touch-up, as it enhances the finish of the paint film. After painting the car's surface, minor defects such as coarse particles, flow marks, whitening, sandpaper marks, or orange peel may appear on the paint film. To address these imperfections, automotive polishing compounds are typically used post-spraying for grinding and polishing. This process improves the mirror-like effect of the paint film, achieving a smooth, glossy, and vibrant finish. Without polishing, the paint may remain uneven, and the longevity of sealant application will be significantly reduced, failing to provide long-term adhesion. The Meaning of Polishing: Car polishing is a step in the automotive detailing process, performed before waxing, sealing, or coating. Sealing or coating must be preceded by polishing, and only a finely polished car can achieve a mirror-like finish. This is an essential step in the sealing process. The Role of Polishing: It removes minor spots and scratches. During the painting process, impurities or dust from the paint booth may get trapped in the paint. Polishing post-painting can eliminate these tiny blemishes or scratches, as well as remove oxidation layers, ensuring the paint has no color difference and feels smooth to the touch, as if no painting was done. Maintain consistent polishing direction with a systematic approach. Avoid using wool pads for mirror glaze treatments. After polishing and applying a mirror glaze, a final wax layer is necessary for complete protection, maximizing the car's defense. Since the paint is constantly exposed to external elements like UV rays, rain, branches, and stones, which can damage it, regular waxing is crucial to preserve the car's appearance. Typically, waxing should be done every two months, adjusted based on climate and other external conditions.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.