Can I check my results right after passing Subject 2?

2 Answers
GideonAnn
07/25/25 12:26pm
For the driving test Subject 2, as long as you pass on the same day, you can check the results after 24 hours. Below is an extended introduction: Result inquiry introduction: Subject 2 results cannot be checked online. After completing Subject 2, the computer will provide an audio prompt, indicating whether the examinee has passed. If the prompt says 'Pass,' then Subject 2 is considered passed (a score of 80 or above is passing), and there is no need to check the specific score. If you are still unsure, you can call your instructor for consultation, and the instructor will inform you of the exact score. Once you pass, you can start preparing for Subject 3. Result confirmation: For Subject 2, if you fail the first attempt, you are allowed one retake. If you do not attend the retake or fail the retake, the current test session ends, and the applicant must reschedule the test after ten days.
Was this review help?
20
5
Share
PaigeLee
08/11/25 8:21pm
When I finished the second driving test, I was also eager to know my score, but it wasn't immediately available. The system voice would announce whether you passed or failed right after the test, setting the tone. The exact score would take about half a day to a day to be confirmed by the examiner and uploaded to the system. In my case, I saw the detailed results the next day on the 12123 traffic management app—10 points deducted for the hill start and 5 points for parallel parking. If you signed the score confirmation form on-site, you could see the printed details right then. Don't worry too much about checking the score; the key is passing. The most important thing about getting a driver's license is solidifying safe driving awareness.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

What should be noted when following the preceding vehicle for a right turn while driving?

When following the preceding vehicle for a right turn while driving, pay attention to: 1. The vehicle ahead may stop to yield to pedestrians or non-motorized vehicles at the intersection; 2. Pedestrians may suddenly enter the crosswalk; 3. The right side is a non-motorized vehicle lane, and there may be non-motorized vehicles proceeding straight within the blind spot. More precautions for following a vehicle are as follows: 1. Be cautious when overtaking: Since large trucks are wider, following them can be dangerous and obstruct your view. Therefore, many drivers choose to overtake. When overtaking, ensure no other vehicles are attempting to overtake simultaneously. If there are, slow down and wait for them to complete the maneuver before accelerating to overtake. When shifting gears, pay attention to your speed. Speeds on highways are generally high, so accidents can be more severe with lower survival rates. 2. Be careful on slopes: Slopes inherently present challenges, and visibility can be obstructed. When going uphill, you may not see oncoming traffic. Therefore, on slopes, stay alert and watch for potential hazards. Prevent rolling back by using the handbrake when stopping and signal to the vehicle behind. Honk to alert oncoming traffic. When going uphill, you can increase throttle but must control your speed. When going downhill, always reduce speed.
4
3
Share

How to reset the tire pressure warning on Volkswagen Golf?

The tire pressure reset button for the Volkswagen Phideon is located on the center console of the dashboard, in front of the gear shift lever, marked with a capital SET. Tire pressure reset is an operation to reset the tire pressure monitoring system after addressing tire pressure faults. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the completion of the tire pressure reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. A tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors the tire pressure. If the sensor is damaged during driving, the tire pressure warning light will illuminate. The only solution for a damaged sensor is to replace it with a new one.
14
2
Share

Does Replacing the Door Check Require Removing the Door?

Replacing the door check requires removing the door. The process of replacing the door check mainly involves the following steps: 1. Remove the window regulator. 2. Remove the plastic frame of the door handle, pry gently, and be careful with the plastic clips. 3. Remove the screws on all four sides of the door. 4. Remove the door. 5. Remove the speaker inside the door panel. 6. Unscrew the door check and remove it through the speaker hole in the door panel. 7. Install the new door check and reverse the above steps. Additional Information: 1. The function of the door opening limiter is to restrict the degree to which the door can open. On one hand, it limits the maximum opening angle of the door, preventing it from opening too wide. On the other hand, it can keep the door open when needed. 2. There are two classification methods for door opening limiters: (1) According to the method of providing limiting force, they can be classified into rubber spring type, metal spring type, and torsion spring type. (2) According to the type of friction, they can be classified into rolling friction type and sliding friction type.
17
4
Share

What is a Sport Appearance Package?

Sport appearance package refers to the installation of external aerodynamic devices and splitters to improve the vehicle's aerodynamic performance, reduce air resistance, and enhance visual impact. The main components of a sport appearance package include: 1. Full body kit. 2. Underbody panels. 3. Roof rack. 4. Rear spoiler. Extended content: When selecting the appropriate body kit for your car, consider the following aspects: 1. Hood: Lightweight and strong, capable of withstanding high temperatures. Ideally, it should help dissipate engine heat. 2. Front lip: The front lip is the most distinctive AEROPARTS that highlights the car's personality. Generally, if the shape is not too sharp and has fixed fasteners (no zip ties allowed), it can be installed. However, avoid choosing styles that are too low, as they may cause inconvenience in daily driving. 3. Front bumper spoiler: Currently, the popular CANARD is considered the most effective AEROPARTS for increasing downforce at the front of the car, with a growing number of installations. When selecting, avoid overly sharp or protruding styles to prevent potential harm to pedestrians. 4. GT-WING: The gap between the main wing and the car body should be less than 2CM. If it exceeds this, the length of the wing ends should leave a 1.5cm margin from the door panels. 5. Side skirts: After installing the body kit, the minimum ground clearance should not be less than 9CM (about the height of a pack of cigarettes). The catalytic converter heat shield should not be lower than 5cm from the ground.
18
4
Share

How to Repair a Motorcycle Odometer That Isn't Working?

There are several main steps to solve the issue of a motorcycle odometer not working, which are as follows: 1. First, remove the speedometer cable from the front wheel to check if the cable is broken. 2. Rotate the front wheel to see if the gear shaft rotates. If the cable is broken, replace it directly. 3. If the gear shaft does not rotate, remove the front wheel for repair or replace the speedometer gear. Common faults in the transmission system of scooters generally include the following: 1. Wear of the front variator rollers. Fault principle: After the front variator rollers wear out, the centrifugal force generated by the rollers with engine speed changes decreases, and sometimes they may even get stuck in the roller groove and fail to return, resulting in poor separation at idle. Fault symptom: The motorcycle moves forward even when idling. 2. Wear of the front variator bushing. After the front variator bushing wears out, the entire variator may run eccentrically, leading to abnormal engine noise, similar to the sound of a faulty engine crankshaft. 3. Wear of the rear variator. After the rear variator shoes and variator plate wear out, symptoms such as sluggish acceleration and increased fuel consumption may occur. If the rear variator shoe spring breaks, poor separation may result, causing the vehicle to move forward even at idle. If the rear variator's large spring softens or loosens, the vehicle may experience shaking during startup. 4. Breakage of the drive belt. If the front and rear variators are not properly maintained and continue to operate despite severe wear, it may eventually lead to belt breakage.
4
3
Share

What to Do If You Continue Driving After Losing 12 Points on Your License?

If you continue driving after losing 12 points on your license, the following measures will be taken: 1. Temporary suspension of the driver's license: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if the points on a driver's license reach 12 or more, the license will be temporarily suspended. You must attend a week-long study of road traffic laws and regulations at the vehicle management office and pass the subject one exam to regain the 12 points and retrieve your license. 2. Driving after suspension: If you drive a motor vehicle while your license is temporarily suspended, it is considered driving without a license. If caught, your license will be directly revoked, you will be fined between 200 and 2,000 yuan, and you may face up to 15 days of detention. 3. Other penalties: If you drive without a license and are involved in a traffic accident, you will be unconditionally held fully responsible, and the insurance company will not cover any compensation. Additionally, if a serious accident occurs resulting in severe injury, death, or significant loss of public or private property, you may face up to three years in prison or detention. Fleeing the scene of an accident will result in a prison sentence of three to seven years; if the escape leads to someone's death, the sentence will be seven years or more.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.