Can I bring my own photo for driver's license renewal?

Can I learn to drive with an A3 license initially?

First-time drivers can directly apply for an A3 driver's license. Below is an introduction to obtaining an A3 license: 1. The A3 driver's license can only be applied for at bus-exclusive driving schools. 2. Applicants for the A3 license must be between 21 and 50 years old, with a height of at least 155 cm. 3. Naked or corrected vision must reach 5.0 on the logarithmic visual acuity chart. Here are more details about the A3 license: 1. First-time applicants for a motor vehicle driver's license can apply for licenses covering urban buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, small automatic transmission passenger cars for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and tramcars. 2. Those who already hold a motor vehicle driver's license and wish to add additional vehicle types must not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before applying.

8

0

Share

What is the load limit for two-axle vehicles on highways?

Two-axle vehicles are temporarily limited to 18 tons, 6×4 vehicles are limited to 49 tons, and 6×2 vehicles are limited to 46 tons, with unified national standards. Below is more information about two-axle vehicles: 1. Axle: An axle is a vehicle bridge, and a two-axle vehicle has two bridges. 2. Two-axle truck: A truck with one front axle and one rear axle is called a two-axle truck. 3. Three-axle truck: A truck with one front axle and two rear axles, or two front axles and one rear axle is called a three-axle truck. 4. Drive shaft: It is used to transmit driving force from the engine to the drive wheels. 5. Other introductions: Non-driven axles are called axles, while driven axles are called bridges. Some three-axle vehicles have one axle in the front and one bridge and one axle in the rear, marked as (6×2). Some three-axle military off-road vehicles are all-wheel drive, marked as (6×6). Light trucks are generally (4×2), while heavy trucks are generally (6×4).

4

1

Share

Where is the catalytic converter located in a Subaru Forester?

The catalytic converter in a Subaru Forester is located in the exhaust pipe. The catalytic converter converts harmful gases emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation-reduction reactions. Most modern vehicles are equipped with catalytic converters. Only older vehicles produced before the implementation of the China II emission standard, which did not meet the required standards, were manufactured without catalytic converters. Components of a catalytic converter: A catalytic converter typically consists of four main parts: the shell, vibration damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxidation and flaking, which could lead to substrate blockage. The vibration damping layer is composed of padding or wire mesh, which provides sealing, insulation, and substrate fixation. To protect the substrate from damage caused by vibration or thermal deformation, the padding is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. The substrate is made of honeycomb-shaped ceramic material, although many are also made of metal (including stainless steel). The catalyst consists of precious metals such as platinum, rhodium, and palladium, which are sprayed onto the substrate to form the purifying agent.

17

0

Share

What is included in the first maintenance?

The first maintenance of a car mainly involves changing the engine oil and oil filter, followed by inspections. Finally, all visible screws and nuts under the chassis are tightened, and the exhaust pipe hangers are checked for security. Here is the relevant preparation needed before the first maintenance: 1. It is best to make an appointment with the 4S store before going for the first maintenance. Due to the increasing number of vehicles, the service workshops of 4S stores are often "packed with cars." Without an appointment, you might wait outside for half a day without getting your turn. 2. When going for maintenance, certain items must be brought along, such as the user manual and vehicle registration. 3. If you encounter any faults or questions while driving, it is advisable to record them and inform the staff during the first maintenance registration. This allows the technician to check all issues during the first maintenance. For example, if a small icon has appeared before or there was an unusual noise while driving, these issues should be reported to the staff in advance for appropriate checks.

13

4

Share

What is the battery model for Geely car keys?

Geely car key batteries come in two models: CR2025 and CR2032, with the specific model depending on the vehicle type. CR2025 battery: C denotes a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode, R indicates the battery shape is cylindrical (F would be used for square shapes), 20 represents the battery diameter of 20mm, and 25 indicates the battery thickness of 2.5mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity ranges from 140-170mAh. CR2032 battery: This lithium manganese dioxide battery is named according to IEC standards. C denotes the lithium metal and manganese dioxide chemical system, R indicates the cylindrical shape (F for square), 20 represents the 20mm diameter, and 32 indicates the 3.2mm height. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity ranges from 200-240mAh.

16

4

Share

Where is the new Touareg produced?

The new Touareg is produced at Volkswagen's Slovakia factory. Introduction to the Touareg: The Touareg is a mid-to-large-sized SUV under the Volkswagen brand. The dimensions of this vehicle are 4878mm in length, 1984mm in width, 1717mm in height, with a wheelbase of 2899mm. In terms of configuration: The 2.0-liter turbocharged engine of the Touareg has a maximum power of 180kW, with the maximum power achieved at 5000 to 6500 rpm. The maximum torque is 370 Nm, available from 1600 to 4300 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and an iron cylinder block. It is paired with an 8-speed automatic transmission (8AT). The 3.0-liter turbocharged engine delivers a maximum power of 250kW, with the maximum power achieved at 5300 to 6400 rpm. The maximum torque is 450 Nm, available from 1340 to 5300 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is also paired with an 8AT transmission. The use of an 8AT transmission enhances the vehicle's shift smoothness and fuel efficiency.

12

2

Share

Can I bring my own photo for driver's license renewal?

Can I learn to drive with an A3 license initially?

What is the load limit for two-axle vehicles on highways?

Where is the catalytic converter located in a Subaru Forester?

What is included in the first maintenance?

What is the battery model for Geely car keys?

Where is the new Touareg produced?

How to Determine the Depth of Car Paint Scratches?

What are the usage and precautions for seat belts?

How to prevent theft of external tire pressure monitors?

What to Do When the Car Keys Are Locked Inside the Car?