Can I Bring a Mobile Phone for Subject Three?

How to Resolve the BMW DTC Warning Light?

Here are the methods to eliminate the DTC warning light: 1. One method is to take the vehicle to a 4S shop for inspection and repair, then use a decoder to clear the fault codes in the electronic control unit, which will turn off the DTC light; 2. Another method is to restart the engine and press the DTC switch button on the vehicle to reactivate DTC. If there are no issues, the DSC warning light will be eliminated. Below is an introduction to the functions of DTC: 1. It determines whether the drive wheels are slipping by comparing the rotation speed of the drive wheels and the transmission wheels. When the former exceeds the latter, it suppresses the drive wheel speed as part of a traction control system. Its operation mode is very similar to ABS, as both use sensors and brake regulators. When DTC detects wheel slip, it first adjusts the engine ignition timing through the engine control computer, reduces engine torque output, or applies brakes to the slipping wheel to prevent further slipping. 2. In cases of severe slipping, it further controls the engine fuel supply system. During operation, the transmission maintains higher gears, and when the throttle is increased, it avoids sudden downshifting to prevent more severe slipping. The most notable feature of DTC is its use of the existing ABS system's computer, speed sensors, and control over the engine and transmission computer, ensuring accurate application even when using a spare tire.

16

0

Share

How to Know if the Sunroof of the New Excelle is Fully Closed?

When closing the sunroof, you need to hold down the sunroof close button continuously. If the sunroof glass stops moving, it means it is fully closed. Below is some relevant information about the Excelle: 1. The Excelle is a compact car under the Buick brand. The dimensions of this car are 4609 mm in length, 1798 mm in width, and 1464 mm in height, with a wheelbase of 2640 mm. 2. The Excelle is equipped with two engines: a 1.5L naturally aspirated engine and a 1.3L turbocharged engine. The 1.5L naturally aspirated engine delivers 113 horsepower and a maximum torque of 141 Nm. The maximum power output of this engine is achieved at 6000 rpm, and the maximum torque is available at 4400 rpm. This engine features DVVT technology and multi-point fuel injection, and it uses an aluminum cylinder head and a cast iron cylinder block. It is paired with a 6-speed automatic transmission (6AT). The 1.3L turbocharged engine produces 163 horsepower and a maximum torque of 230 Nm. The maximum power output of this engine is achieved at 5500 rpm, and the maximum torque is available between 1800 and 4400 rpm. This engine is equipped with a 48V mild hybrid system and multi-point fuel injection, and it uses an aluminum cylinder head and block. It is also paired with a 6-speed automatic transmission (6AT). 3. The Excelle features a MacPherson independent front suspension and a multi-link independent rear suspension.

17

5

Share

Is there a purchase contract when buying a new car?

When purchasing a new car, there is always a purchase contract, and the 4S dealership will sign this contract with the buyer. Below are some relevant considerations regarding car purchases: 1. Determine your budget: First, establish your budget range and reasonably assess your financial capability. Avoid blindly choosing high-priced vehicles that exceed your financial capacity. The total cost, including the car price, insurance, and routine maintenance, can be substantial, so it's important to act within your means to prevent the car from becoming a financial burden. If you're not in a hurry to buy, it's best to choose a period when car prices are lower and market prices are stable, typically during the off-season from March to August. 2. Inspection upon delivery: When taking delivery of the car, pay attention to the body gaps and paintwork. Check the door gaps and the gaps around the front and rear bumpers. Open the doors to observe if there is any color difference between the interior and exterior paint. Inside the car, inspect the odometer reading, the condition of the seat protective coverings, and whether the plastic coverings on the dashboard are intact. Also, check for any dirt or debris on the seats, dashboard, and other areas. Be sure to note the gap between the manufacturing date and the delivery date; if the gap is too long, the car might be a display model or a refurbished vehicle (test drive car). Start the engine to assess its operating condition, listening for any unusual noises and checking if any warning lights are illuminated.

14

0

Share

What is the fuel consumption of the Ford Focus?

Ford Focus fuel consumption is 6.4 liters per 100 kilometers. The following is a related introduction to the Ford Focus: 1. In terms of appearance, the car adopts a crossover-style body kit, including a new front bumper design, adding black wheel arches and side skirts as well as silver underbody protection. For the wheels, the base model is equipped with 17-inch five-spoke aluminum alloy wheels, while the high-end model features the same 18-inch five-spoke two-tone alloy wheels as the overseas version, along with LED headlights. 2. The interior design clearly reflects the Ford family style. The dashboard is wrapped in large areas of soft-touch materials, providing a comfortable feel, and is accented with silver decorative trim in details. In terms of configuration, it is equipped with the Ford Co-Pilot-360 intelligent driving assistance system, including ACC full-speed intelligent adaptive cruise control, parking assistance system, intelligent collision avoidance system, intelligent traffic sign recognition, lane keeping assistance, etc. 3. In terms of power, the domestic Ford Focus is equipped with the same 1.5T inline three-cylinder engine as the standard model. After meeting the China VI emission standards, the maximum power is reduced to 174 horsepower, which is 10 horsepower less than the China V emission version, with a peak torque of 243 Nm. For the transmission system, the new car continues to be matched with an 8-speed automatic transmission.

18

2

Share

At what age can I apply for a Class B driver's license?

You can apply for a Class B license at the age of 21. Below are the relevant details about the Class B driver's license: 1. Class B licenses can be further divided into B1 and B2: The B1 license allows you to drive medium-sized buses, while the B2 license permits you to drive large trucks. Additionally, both B1 and B2 licenses allow you to drive vehicles covered by Class C1 and M licenses. M stands for wheeled self-propelled machinery, which includes engineering vehicles with rubber tires, such as road rollers, loaders, and forklifts. 2. The medium-sized buses covered by B1 (also known as minibuses) must not exceed 6 meters in length and must carry no more than 19 passengers. If the vehicle exceeds 6 meters or carries 20 or more passengers, an A1 license is required. The large trucks covered by B2 include heavy-duty and medium-duty trucks. Heavy-duty trucks are those with a length of 6 meters or more and a total weight of 12,000 kg or more. Medium-duty trucks are those with a length of 6 meters or more and a total weight between 4,500 kg and 12,000 kg. Tractors with detachable cabs and trailers require an A2 license. 3. Regarding application requirements: A B2 license can be applied for when obtaining a driver's license for the first time, while a B1 license requires holding at least a Class C license for over three years and no record of accumulating 12 penalty points in any of the three consecutive years prior to application. However, if you already hold a B2 license and wish to upgrade to B1, the required time interval can be reduced from three years to two years, provided there are no full penalty point cycles during that period.

17

0

Share

How Many Attempts Are Allowed for Driving Test Subject 2 and Subject 3?

For Subject 2 and Subject 3, each appointment allows one examination attempt. If the examinee fails, they can retake the test on the spot. If they choose not to retake or fail the retest, the current examination session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of examination appointments for Subject 2 and Subject 3 road driving skills tests must not exceed five. If the fifth attempt is still unsuccessful, the passing scores of other subjects already taken will be invalidated. Subject 2 is scored out of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: ① For applicants of large buses, trailers, city buses, medium-sized buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. Subject 3 is scored out of 100 points, with a passing score of 90. The test generally includes: vehicle preparation, simulated lighting test, starting, driving straight, gear shifting operations, lane changing, pulling over, going straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, overtaking, making U-turns, and nighttime driving.

3

5

Share

Can I Bring a Mobile Phone for Subject Three?

How to Resolve the BMW DTC Warning Light?

How to Know if the Sunroof of the New Excelle is Fully Closed?

Is there a purchase contract when buying a new car?

What is the fuel consumption of the Ford Focus?

At what age can I apply for a Class B driver's license?

How Many Attempts Are Allowed for Driving Test Subject 2 and Subject 3?

What does LOCK mean on a car?

What series is the Mercedes-Benz CL?

How to Skillfully Remove Foreign Objects from Car Vents?

What is the solution for the Buick P0172 system running too rich?