···
Log in / Register

Can Flags Be Inserted on Both Sides of the Hongqi Car?

3 Answers
LeDaniella
07/28/25 4:01pm
Flags can be inserted on both sides of the Hongqi car. The vehicle stands out in terms of exterior design and interior. Exterior design of the vehicle: The most eye-catching feature is the Chinese characters at the rear, combined with the overall stylish and sleek body appearance. Even when parked next to luxury cars, it has high recognition. Its exterior design is quite distinctive, featuring not only the rear Chinese characters but also the iconic red vertical emblem, which is a unique design element of Hongqi models. Interior of the vehicle: The interior is directly inspired by the HQE concept car, presenting a solemn and serious style, consistent with the heritage and approach of the classic Hongqi CA770. Signature design elements include the fan-shaped grille, cannon-style headlights, and horizontal waistline, all of which contribute to the L7's dignified and prestigious aura. The L7 measures 5555mm in length, 2018mm in width, and 1578mm in height, with a wheelbase of 3435mm, placing it in the same size category as luxury vehicles like the Rolls-Royce Ghost. Unlike the L9, the L7 does not feature rear-hinged doors but retains a traditional door design.
Was this review help?
6
1
Share
VonSebastian
08/11/25 8:18pm
As someone frequently involved in car modifications, I know this is a common question. Technically, it's feasible to mount small red flags on both sides of a vehicle, but you'll need to install additional fixtures like magnetic stickers or short flag poles since the car body doesn't come with pre-drilled holes. Safety is paramount—ensure the flags are small enough not to flutter in the wind and obstruct rearview mirrors or driving visibility. Traffic regulations emphasize keeping the vehicle clean and limit protrusion height to prevent injuries to pedestrians or accidents. Culturally, red-flag cars symbolize Chinese pride, and displaying flags can express emotions during holidays like National Day. However, daily driving with flags increases wind resistance (raising fuel consumption) and may scratch the paint. I recommend temporary use for special occasions only, removing them immediately afterward to avoid risks. Opting for easy-to-install/remove designs saves hassle.
Was this review help?
14
3
Share
Expand All
DiGabriela
09/29/25 6:21am
I've driven many car models, including some Hongqi vehicles. Mounting small flags on both sides isn't difficult, but requires careful handling. You need to find suitable fixing positions, such as using tape or suction cups on window edges, being careful not to damage the paintwork. The flags shouldn't be too large or long, otherwise wind may cause driving interference or risk hitting pedestrians. Legally speaking, minor decorations are usually tolerated, but prominently protruding objects might attract police inspection, especially on highways. This is commonly seen during celebratory events, where car owners display patriotic and festive spirit. My personal experience suggests long-term flag mounting isn't advisable - flags fade quickly from sun and wind exposure, and may get tangled in wheels. Using stickers proves more practical. Occasional decoration is fine, but remember to remove them afterwards.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

Which country currently manufactures Land Rover vehicles?

Land Rover is a British SUV manufacturer, with most of its models produced in the UK. However, some Land Rover models are also manufactured domestically in China. The Land Rover Group is the largest automobile manufacturer in the UK. Current Land Rover models include: Range Rover Sport (classified as a mid-to-large-size SUV) - a large luxury vehicle; Range Rover (mid-to-large-size SUV); Range Rover Velar (mid-size SUV); Range Rover Evoque (compact SUV); Defender (mid-size SUV). The Land Rover Defender is a mid-to-large-size SUV. The dimensions of the Range Rover are: length 4950mm, width 2191mm, height 1863mm, with a wheelbase of 2880mm. The front track is 1629mm and rear track is 1626mm. The Range Rover seats 5 passengers and has 5 doors. It is equipped with two engine options: a 5.0L supercharged engine producing maximum power of 375kW and torque of 625Nm, and a 5.0L naturally aspirated engine with maximum power of 276kW and torque of 510Nm.
10
3
Share

What Causes the Car Lights to Keep Flashing?

The reasons for car lights continuously flashing are: 1. The hazard light switch is turned on; 2. Partial circuit failure connected to the vehicle's computer, bulb or ignition coil failure, stabilizer malfunction; 3. Poor wiring contact causing a short circuit, resulting in continuous light flashing; 4. The vehicle computer activates the recognition system for the anti-theft chip; 5. Insufficient battery power alerts the owner through flashing lights when the battery is low; 6. Brake system failure causing the tail lights to flash continuously; 7. The steering wheel is locked when parked, and the car activates the anti-theft function. Car lights are primarily used for daily, nighttime, and poor visibility conditions to provide illumination and warn other vehicles, ensuring driving safety.
14
4
Share

What Causes Excessive Tire Pressure?

The reasons for excessive tire pressure are: 1. Over-inflation of tires leading to high pressure; 2. Hot weather causing gas expansion and increased pressure; 3. Prolonged driving generating friction heat, resulting in higher pressure; 4. Aging and wear of suspension components related to wheels causing misalignment, uneven wear, increased temperature, and higher tire pressure. Effects of excessive tire pressure: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Steering wheel vibration and deviation, decreasing driving comfort; 3. Accelerated wear of central tread patterns, shortening tire lifespan; 4. Increased vehicle vibration, indirectly affecting other components' longevity; 5. Excessive stretching deformation of tire cords, reduced elasticity, and increased load during driving; 6. Decreased resistance to punctures.
8
4
Share

How to Remove the Side Mirror of the New X-Trail?

The steps to remove the side mirror of the new X-Trail are: 1. Press down the head of the mirror to tilt the tail upward, then grasp the tail and pull outward to remove the mirror; 2. After removing the mirror, unplug the wire connector of the mirror heating element, and manually connect the metal buckle on one end of the heating wire; 3. Connect the metal buckle to the slot on the top of the black plastic holder on the back of the mirror, then place the wired mirror back into the mirror housing, adjust its position, and press it firmly; 4. Unscrew the screw at the bottom of the mirror and the screw beneath the middle component of the mirror; 5. Remove the hidden screw and take off the middle component to complete the entire disassembly process.
5
1
Share

How to Turn Off the Auto Start-Stop Function on the Qashqai?

The method to turn off the auto start-stop function on the Qashqai is: 1. Start the vehicle's power; 2. Locate the engine start-stop control button; 3. Press the button marked with an 'A' to deactivate the engine start-stop function. Taking the Qashqai 2021 2.0L CVT Smart Edition as an example, its body dimensions are: length 4401mm, width 4401mm, height 1593mm, with a wheelbase of 2646mm and a fuel tank capacity of 57 liters. The Qashqai 2021 2.0L CVT Smart Edition is equipped with a 2.0L 151 horsepower L4 engine, delivering a maximum horsepower of 151hp, a maximum power of 111kW, and a maximum torque of 194Nm.
15
3
Share

What is the reason for jerky acceleration and inability to increase fuel during cold start?

The reasons for jerky acceleration and inability to increase fuel during cold start are: 1. Excessive carbon buildup on the throttle valve and air flow meter, which can cause jerky acceleration and inability to increase fuel when pressing the accelerator; 2. Too much carbon deposit in the combustion chamber of the cylinder. The combustion chamber has a certain adsorption effect on gasoline, and excessive carbon deposits prevent normal adsorption of gasoline, thus prolonging the ignition start time; 3. Lean mixture causing insufficient gas thrust on the piston after ignition, prolonging combustion time and leading to engine overheating; 4. Intermittent operation of the engine due to high and low voltage component and circuit faults in the ignition system, resulting in discontinuous high-voltage sparking and causing weak acceleration.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.