Can electronic eyes capture uninsured vehicles?

2 Answers
MarcusFitz
07/29/25 5:26am
Electronic eyes cannot capture uninsured vehicles. Only the cameras on police cars can photograph the vehicle's license plate, and the in-car system can provide feedback on whether the vehicle is uninsured, uninspected, or using fake plates. Electronic eyes are fixed devices that capture traffic violations and illegal activities. Penalties for being caught driving an uninsured vehicle: According to the Road Traffic Safety Law, the motor vehicle will be impounded, the owner will be ordered to pay compulsory traffic insurance, and a fine of twice the amount of the compulsory insurance will be imposed. No points will be deducted from the driver's license. If an uninsured vehicle is involved in a traffic accident while driving on the road, the insurance company may refuse to compensate.
Was this review help?
9
5
Share
SanCassidy
08/12/25 9:01am
After driving for so many years, I can say those electronic eyes are really sharp - they capture tow trucks on the road without fail. The cameras are installed at intersections and bridgeheads, automatically aligning to scan and record license plates, with no exception for tow trucks. As long as the plates are properly displayed, the system captures all details. For example, last week my neighbor was towing a motorcycle to the countryside for a trip and got clearly caught speeding by an electronic eye, with the ticket mailed directly home. When towing, license plates must be clean and intact; otherwise, the system might misread them. Nighttime photography is also high-definition, with infrared fill light ensuring recognition. From a safety perspective, this helps reduce the risk of unlicensed towing, especially on highways where everyone should be more cautious. Ensure your lights and connections are secure since electronic eyes are everywhere. Following the rules makes for safer driving - don't take chances when towing. Technological improvements have made everyone's travels a bit more secure.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

Where is the cabin air filter located on a BMW 730?

The cabin air filter locations differ between older and newer models of the BMW 730. Specific details are as follows: 1. In older BMW 730 models, the cabin air filters are located in the engine compartment, beneath the windshield wipers. There is one on each side. 2. In newer BMW 730 models, the cabin air filter is located inside the glove compartment on the passenger side. The specific steps to access it are as follows: (1) First remove the long panel on the left side of the passenger seat: unscrew one bolt and pull it straight back. (2) Then remove the lower cover of the glove compartment: there are two bolts in total, and there's no need to disconnect the glove compartment light connector. (3) After opening, you will see the cover plate for the cabin air filter: there are three screws on the cover plate. Remove them, open the cover, and you will see the cabin air filter.
14
0
Share

How to Cancel the Auto Start-Stop Function on Audi A4?

Audi A4's auto start-stop button is located on the left side of the gear shift, adjacent to the auto hold function. This feature is enabled by default and can be turned off by pressing the button, with the corresponding indicator light illuminating when the start-stop is deactivated. Below are specific details about the Audi A4's start method: 1. All Audi A4 models come equipped with an auto start-stop system. After firmly pressing the brake, the engine shuts off, and upon releasing the brake pedal, the starter engages, automatically igniting the engine to start the vehicle. 2. During this starting process, there is typically a slight body vibration, and the dashboard displays corresponding indicators. For instance, when the auto start-stop function is active and the engine is stopped, the tachometer needle points to the AUTO position; when not in use, it points to the engine idle speed.
9
2
Share

What Components Make Up the Piston Connecting Rod Assembly?

The piston connecting rod assembly primarily consists of the piston, piston rings, piston pin, connecting rod, and connecting rod bearings. Below is a detailed introduction to the piston connecting rod assembly: 1. The piston connecting rod assembly converts the reciprocating motion of the piston into the rotational motion of the crankshaft, while transforming the forces acting on the piston into torque output by the crankshaft, which drives the rotation of the vehicle's wheels. 2. The piston connecting rod assembly serves as the transmission component of the engine, transferring the pressure of the combustion gases to the crankshaft, causing the crankshaft to rotate and output power. 3. Common faults in the piston connecting rod assembly include: damage to the connecting rod bearings due to oil starvation, piston cylinder collision, cylinder head impact, damage to the connecting rod crankshaft, piston ring breakage, excessive piston clearance, and more.
15
5
Share

What are the differences between the Infiniti QX80 and the Nissan Patrol?

There are multiple models under both the Infiniti QX80 and the Nissan Patrol, and the comparison results vary depending on different configurations and price ranges. The latest top-tier model of the Infiniti QX80 is the 2017 5.6L 4WD, while the latest top-tier model of the Nissan Patrol is the 2018 5.6L V8 Standard. The specific differences are as follows: 1. Price: The official price of the top-tier Infiniti QX80 is higher than that of the top-tier Nissan Patrol. 2. Overall body: The body of the top-tier Infiniti QX80 is longer than that of the top-tier Nissan Patrol, and the wheelbase of the Infiniti QX80 is also longer. 3. Overall configuration: The top-tier Nissan Patrol and the top-tier Infiniti QX80 each have their own strengths and weaknesses, making them evenly matched. 4. Power output: The top-tier Infiniti QX80 and the top-tier Nissan Patrol are the same.
14
5
Share

How to Set the Cruise Control on the Equinox?

Setting the cruise control involves the following steps: 1. Activation: Press the right button followed by the down button to activate cruise control. When the right button is pressed, the cruise control icon appears on the dashboard screen, and the vehicle enters standby mode for cruise control. Pressing the down button then displays the cruising speed on the dashboard screen, and cruise control is activated. The initial cruising speed is automatically set to the instantaneous speed at the moment the button is pressed. After activation, you can adjust the speed using the up or down buttons—pressing the up button increases speed, while the down button decreases it, allowing your right foot to rest. 2. Switching Modes: Once cruise control is activated, you can switch between cruise control mode and manual driving mode at any time. 3. Deactivation: Press the right button to turn off cruise control, and the cruise icon and speed will no longer be displayed on the dashboard screen.
5
2
Share

What causes the rattling noise in Kia K5's sunroof?

In most cases, the rattling noise in Kia K5's sunroof is caused by friction between the sunroof glass seal and the roof metal panel. Generally, the noise issue can be resolved by spraying some dashboard wax on the external seal area, or by thoroughly cleaning the seal area and applying some hand cream. Precautions for using the sunroof: 1. Before opening the sunroof, ensure there are no obstacles on the roof that might hinder its sliding. 2. Try to avoid using the sunroof on bumpy roads to prevent damage to the sunroof and slide rail components due to vibrations. 3. Do not open the sunroof during rainy days or when washing the vehicle to prevent rainwater or water droplets from accelerating the aging and rusting of the seals and metal parts inside the sunroof.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.